SPECIFICATION CONTROL DRAWING
Title
SCD
55/0712
Revision
Date
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
12-15-15
HEAVY DUTY, OUTER SPACE, 1000 VOLT
This specification sheet forms a part of the latest issue of Raychem Specification 55/.
A
PRIMARY INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
Primary insulation shall be of a contrasting
pigmentation to that of the jacket.
CONDUCTOR - SILVER-COATED COPPER
JACKET - LOW OUTGASSING,
RADIATION-CROSSLINKED,
MODIFIED ETFE
TABLE I. CONSTRUCTION DETAILS
PART
NUMBER
1/
55/0712-24-*
55/0712-22-*
55/0712-20-*
55/0712-18-*
55/0712-16-*
55/0712-14-*
55/0712-12-*
55/0712-10-*
WIRE
SIZE
(AWG)
24
22
20
18
16
14
12
10
CONDUCTOR
STRANDING
(number x AWG)
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
19 x 27
37 x 28
37 x 26
DIAMETER OF
STRANDED
CONDUCTOR
(inch)
MINIMUM
.023
.029
.037
.046
.052
.065
.084
.106
MAXIMUM
.025
.031
.039
.048
.054
.068
.087
.112
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
24.3
15.1
9.19
5.79
4.52
2.88
1.90
1.19
DIAMETER
(inch)
.056 ± .003
.062 ± .003
.070 ± .003
.080 ± .004
.087 ± .004
.103 ± .004
.120 ± .006
.144 ± .006
MAXIMUM
WEIGHT
(lbs/1000 ft.)
3.3
4.4
6.1
8.7
10.7
15.7
22.9
35.3
TABLE II. PERFORMANCE DETAILS
CROSSLINKED VERIFICATION - BEND TESTING
PART NUMBER
1/
55/0712-24-*
55/0712-22-*
55/0712-20-*
55/0712-18-*
55/0712-16-*
55/0712-14-*
55/0712-12-*
55/0712-10-*
MANDREL DIAMETER
(inch) (± 3%)
1.00
1.00
1.00
1.00
1.25
1.25
2.00
2.00
WEIGHT
(lb) (± 3%)
2.00
2.00
3.00
3.00
3.50
3.50
4.00
4.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE Connectivity (logo), and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
© 2015 Tyco Electronics Corporation. All rights reserved.
Page 1 of 2
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Page
Revision
SCD
SPECIFICATION CONTROL DRAWING
2 of 2
A
55/0712
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 1000 volts (rms) at sea level
COLOR: White preferred
CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION: 50% (minimum)
INSULATION FLAWS:
Primary Insulation,
Spark Test, 1.5 kV (rms)
Impulse Dielectric Test, 6.0 kV (peak)
Finished Wire,
Spark Test, 3.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS: 0.014 in. (minimum) for total insulation
RADIATION RESISTANCE: 500 megarads
SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 inches
VACUUM STABILITY:
Total Mass Loss (TML), 1.00% (maximum)
Volatile Condensable Material (VCM), 0.10% (maximum)
VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz, 5 minutes
1/ PART NUMBER:
The "*" in the part numbers in Tables I and II shall be replaced by a
color code designator.
Example: AWG 22, white: 55/0712-22-9
AWG 22, white with a black stripe: 55/0712-22-90
1/ See footer section on page 1
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
