302073T117K00AB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302073T117K00AB

302073T117K00AB: DescriptionFixed Resistor, Metal Foil, 0.75W, 117000ohm, 350V, 0.05% +/-Tol, -2,2ppm/Cel,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

302073T117K00AB Overview

Fixed Resistor, Metal Foil, 0.75W, 117000ohm, 350V, 0.05% +/-Tol, -2,2ppm/Cel,

302073T117K00AB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	850539189
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e3
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	15.88 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	0.75 W
resistance	117000 Ω
Resistor type	FIXED RESISTOR
series	H(OTHER)
technology	METAL FOIL
Temperature Coefficient	2 ppm/°C
Terminal surface	Tin (Sn)
Tolerance	0.05%
Operating Voltage	350 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Ten-band equalizer composed of two LA3600s

Car electronic voice speaker circuit

Human body induction alarm circuit

Digital high resistance measurement circuit

three position temperature regulator circuit

linear voltage controlled oscillator

EEWORLD University Hall - Super cool! See how the VR smart glasses artificial intelligence system repairs aircraft engines: Super cool! See how the VR smart glasses artificial intelligence system repairs aircraft engines : https://training.eeworld.com.cn/course/3541Application of augmented reality smart glasses artificial ...; phantom7 DIY/Open Source Hardware

The reason why the output waveform of DAC7625u is unstable (there are periodic pulse width changes and phase shift changes): The DAC output waveform is curve 1 (dark blue). Curve 2 (light green) can be regarded as a stable periodic signal. The DAC output waveform is gradually shifted to the right (relative to curve 2). In t...; renjun Analogue and Mixed Signal

The following prompt appears when programming 2812FLASH, please advise: After the burning is completed, the following prompt appears:This program contains initialized RAM data.It may run successfully under Code Composer Studiobut not as a standalone system because of this...; bayasina Microcontroller MCU

Compiler warning Warning[Pe767]: conversion from pointer to smaller integer: The microcontroller I use is MSP430F2418, and the compiler is IAR. After compiling, the following warning appears. What's going on? ? ? Warning[Pe767]: conversion from pointer to smaller integer...; adam_zhang41 Microcontroller MCU

Does anyone have a Kingsoft PowerWord that can run on wince5.0?: Does anyone have a Kingsoft PowerWord that can run on wince5.0? Can you give me a copy? A link is also fine....; yjx356657845 Embedded System

I would like to ask for advice from you guys for my graduation project. Thank you for your advice.: I am a senior student. My graduation project this year is to use a multifunctional electronic clock based on a single-chip microcomputer. It is based on the 51/52 series of single-chip microcomputers....; socvince Embedded System

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components