CC1-
www.vishay.com
Vishay Electro-Films
Thin Film 0402 Size Resistor on Alumina
FEATURES
•
•
•
•
•
•
•
•
•
Product may not be to scale
Wire bondable
Small single chip size: 0.020" x 0.040"
Case: 0402
Resistance range: 10
to 24 k
Alumina substrate
Low stray capacitance: < 0.2 pF
Resistor material: Nichrome
Resistor passivation coat optional
Solder Pads optional
The CC1- series single-value resistor chips offer a small
size, low shunt capacitance and solder pad option. The
CC1- nichrome resistors material offers excellent stability.
The CC1- resistors are manufactured using Vishay
Electro-Films (EFI) sophisticated thin film equipment and
manufacturing technology. The CC1- resistors are 100 %
electrically tested and visually inspected to MIL-STD-883.
APPLICATIONS
Vishay EFI CC1- chip resistors provide excellent
high-frequency response and are ideally suited for
prototyping.
Typical application areas are:
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
Recommended for hermetic environments where die is not
exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
Total Resistance Range
Standard Tolerances
TCR
Tightest Standard Tolerance Available
0.5 %
0.1 %
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
VALUE
10 to 24K
± 0.05, ± 0.1
± 25, ± 50, ± 100
UNIT
%
ppm/°C
10
Ω
20
Ω
200
Ω
12 kΩ
24 kΩ
Note
• Only 25
to 1 k are standard strip line designs for microwave applications
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202, Method 106 - Hermetic
applications
Stability, 1000 h, + 125 °C, 40 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
Revision: 18-Aug-11
1
For technical questions, contact:
efi@vishay.com
VALUE
- 20 typ.
± 0.2 max.
R/R
± 0.1 max.
R/R
- 55 to + 125
± 0.25 max.
R/R
± 0.1 max.
R/R
400
10
12
min.
100 max.
0.040 max.
± 0.25 max.
R/R
UNIT
dB
%
%
°C
%
%
V
V
W
%
Document Number: 61001
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
CC1-
www.vishay.com
DIMENSIONS
in inches
0.020
0.020
0.020
Vishay Electro-Films
0.040
0.040
0.040
0.010
0.010
0.010
0.012
TYPICAL RANGE
10
Ω
to 15
Ω
0.012
TYPICAL RANGE
16
Ω
to 29
Ω
0.012
TYPICAL RANGE
30
Ω
to 24 kΩ
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Chip Size
Chip Thickness
Chip Substrate Material
Resistor Material
Bonding Pad Size
Number of Pads
Pad Material
Backing
VALUE
0.020" x 0.040" ± 0.003" (0.5 mm x 1.0 mm ± 0.08 mm)
0.010" ± 0.002" (0.254 mm ± 0.03 mm)
99.6 % alumina, 2 μ"to 4 μ" finish
Nichrome
0.010" x 0.012" (0.175 mm x 0.30 mm)
2
25 kÅ minimum gold standard
None
GLOBAL PART NUMBER INFORMATION
Global Part Number: CC1-12500KKSSNHWS
Global Part Number Description: CC1- 1.25K 10 %, 100 ppm/°C, std trim, SnPb contacts, no back metal, class H, WS
C
C
1
-
1
2
TOL.
CODE
(%)
5
0
0
K
K
S
S
N
H
W
S
MODEL
CC1-
RESISTANCE
First 4 digits are
significant figures
of resistance
RES.
MULTIPLIER
CODE
B
= 0.01
A
= 0.1
0
=1
1
= 10
TCR
(ppm/°C)
TRIM
STYLE
TERMINATION
BACK
METAL
VISUAL
CLASS
PACKAGING
CODE
WS
=
Waffle pack
100 min,
1 mult
G
= Au
E
= ± 25
E
= Edg
B
= 0.1
S
= SnPb
C
= 0.25
C
= ± 50
S
= Std
A
= Al
D
= 0.5
K
= ± 100
U
= Usr
T
= Lead (Pb)-free (e1)
F
= 1.0
G
= 2.0
J
= 5.0
K
= 10
G
= Au
H
= Class H
N
= None
K
= Class K
Revision: 18-Aug-11
2
For technical questions, contact:
efi@vishay.com
Document Number: 61001
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
