Datasheet
ICL3207E
±15kV ESD Protected, +3V to +5.5V, Low Power, 250kbps, RS-232
Transmitter/Receiver
The
ICL3207E
is a 3V to 5.5V powered RS-232
transmitter/receiver that meets ElA/TIA-232 and
V.28/V.24 specifications, even at V
CC
= 3.0V. The
ICL3207E features five transmitters and
three receivers. It provides ±15kV ESD protection
(IEC61000-4-2 Air Gap) and ±15kV Human Body
Model protection on transmitter outputs and receiver
inputs (RS-232 pins). Targeted applications are ISDN
Terminal Adapters (TAs), PDAs, Palmtops,
peripherals, and notebook and laptop computers
where the low operational power consumption and
even lower standby power consumption is critical.
Small footprint packaging and the use of small, low
value capacitors ensure board space savings. Data
rates greater than 250kbps are ensured at worst case
load conditions. The ICL3207E is fully compatible with
3.3V only systems, mixed 3.3V and 5V systems, and
5V only systems. The ICL3207E is a lower power,
pin-for-pin replacement for the MAX207E, HIN207E,
and HIN237E.
Table 1
summarizes the features of the ICL3207E.
AN9863
summarizes the features of each device in
the ICL32xxE 3V family.
Features
• Pb-free (RoHS compliant)
• ESD protection for RS-232 I/O pins to ±15kV
(IEC61000)
• 5V lower power replacement for MAX207E,
HIN207E, and HIN237E
• Meets EIA/TIA-232 and V.28/V.24 specifications
at 3V
• Latch-up free
• On-chip voltage converters require only four
external 0.1µF capacitors
• RS-232 compatible with V
CC
= 2.7V
• Receiver hysteresis for improved noise immunity
• Ensured minimum data rate: 250kbps
• Ensured minimum slew rate: 6V/µs
• Wide power supply range: Single +3V to +5.5V
Applications
• Battery powered, hand-held, and portable
equipment
• Laptop computers, notebooks, and Palmtops
• Modems, printers, and other peripherals
• ISDN Terminal Adapters (TAs) and set top boxes
Related Literature
For a full list of related documents, visit our website:
•
ICL3207E
device page
Table 1.
Summary of Features
No. of
Tx
5
No. of
Rx
3
No. of Monitor Rx
(R
OUTB
)
0
Data Rate
(kbps)
250
Rx Enable
Function?
No
Manual
Powerdown?
No
Automatic
Powerdown
Function?
No
Part Number
ICL3207E
FN4914 Rev.7.00
May.20.19
Page 1 of 18
ICL3207E
Contents
1.
1.1
1.2
1.3
1.4
2.
2.1
2.2
2.3
2.4
3.
4.
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Typical Operating Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3
4
4
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
5
6
Typical Performance Curves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Application Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.1
4.1.1
4.2
4.3
4.4
4.4.1
4.5
4.6
4.7
4.8
4.9
Charge Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Charge Pump Abs Max Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Low Power Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Low Power, Pin Compatible Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Capacitor Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Power Supply Decoupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Operation Down to 2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
High Data Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Interconnection with 3V and 5V Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.
5.1
5.2
5.3
5.4
6.
7.
8.
±15kV ESD Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Human Body Model (HBM) Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IEC61000-4-2 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air-Gap Discharge Test Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact Discharge Test Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
13
13
Die Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Package Outline Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FN4914 Rev.7.00
May.20.19
Page 2 of 18
ICL3207E
1. Overview
1.
1.1
Overview
Typical Operating Circuit
0.1µF
C
1
†
C
2
†
+
+
9
C1+
C1-
C2+
C2-
T
1
T
2
T
3
T
4
T
5
V-
15
+
2
3
1
24
20
4
R
1
R2
OUT
22
R
2
R3
OUT
17
R
3
GND
5kΩ
5kΩ
16
R3
IN
5kΩ
23
R2
IN
RS-232
Levels
V
CC
V+
+
11
+
C
3
†
C
4
†
T1
OUT
T2
OUT
T3
OUT
T4
OUT
T5
OUT
R1
IN
RS-232
Levels
V
CC
†
C
3
(Optional Connection)
+
10
12
13
14
7
6
18
19
21
5
T1
IN
T2
IN
T3
IN
T4
IN
TTL/CMOS
Logic Levels
T5
IN
R1
OUT
†
- For V
CC
= 3.3V, C
1
- C
4
= 0.1µF or 0.22µF
For V
CC
= 5V, C
1
- C
4
= 0.1µF or 1µF
8
1.2
Ordering Information
Part Number
(
Notes 2, 3
)
Part Marking
ICL 3207ECAZ
ICL 3207ECAZ
ICL3207ECBZ
ICL3207ECBZ
Temp.
Range (°C)
0 to +70
0 to +70
0 to +70
0 to +70
Tape and Reel
(Units) (Note
1)
-
1k
-
1k
Package (RoHS
Compliant)
24 Ld SSOP
24 Ld SSOP
24 Ld SOIC
24 Ld SOIC
Pkg.
Dwg. #
M24.209
M24.209
M24.3
M24.3
ICL3207ECAZ
ICL3207ECAZ-T
ICL3207ECBZ
ICL3207ECBZ-T
Notes:
1. See
TB347
for details about reel specifications.
2. These Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which is compatible with both SnPb and Pb-free soldering operations. Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), see the
ICL3207E
device page. For more information about MSL, see
TB363.
FN4914 Rev.7.00
May.20.19
Page 3 of 18
ICL3207E
1. Overview
1.3
Pinout
24 Ld SOIC, SSOP
Top View
T3
OUT
T1
OUT
T2
OUT
R1
OUT
1
2
3
24 T4
OUT
23 R2
IN
22 R2
OUT
21 T5
IN
20 T5
OUT
19 T4
IN
18 T3
IN
17 R3
OUT
16 R3
IN
15 V-
14 C2-
13 C2+
R1
IN
4
5
T2
IN
6
T1
IN
7
GND
V
CC
8
9
C1+ 10
V+ 11
C1- 12
1.4
Pin Descriptions
Pin
V
CC
V+
V-
GND
C1+
C1-
C2+
C2-
System power supply input (3.0V to 5.5V).
Internally generated positive transmitter supply (+5.5V).
Internally generated negative transmitter supply (-5.5V).
Ground connection.
External capacitor (voltage doubler) is connected to this lead.
External capacitor (voltage doubler) is connected to this lead.
External capacitor (voltage inverter) is connected to this lead.
External capacitor (voltage inverter) is connected to this lead.
Function
T1
IN
, T2
IN
, T3
IN
, T4
IN
, T5
IN
TTL/CMOS compatible transmitter inputs.
T1
OUT
, T2
OUT
, T3
OUT
,
T4
OUT
, T5
OUT
R1
IN
, R2
IN
, R3
IN
R1
OUT
, R2
OUT
, R3
OUT
±15kV ESD protected
,
RS-232 level (nominally ±5.5V) transmitter outputs.
±15kV ESD protected
,
RS-232 compatible receiver inputs.
TTL/CMOS level receiver outputs.
FN4914 Rev.7.00
May.20.19
Page 4 of 18
ICL3207E
2. Specifications
2.
2.1
Specifications
Absolute Maximum Ratings
Parameter
Minimum
-0.3
-0.3
+0.3
Maximum
+6
+7
-7
+14
Unit
V
V
V
V
V
CC
to GND
V+ to GND
V- to GND
V+ to V-
Input Voltages
T
IN
R
IN
Output Voltages
T
OUT
R
OUT
Short-Circuit Duration
T
OUT
ESD Rating
-0.3
+6
±25
V
V
±13.2
-0.3
V
CC
+ 0.3
Continuous
See
“ESD Performance” on page 6
V
V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions can adversely
impact product reliability and result in failures not covered by warranty.
2.2
Thermal Information
Thermal Resistance (Typical) (Note
4)
θ
JA
(°C/W)
75
100
24 Ld SOIC Package
24 Ld SSOP Package
Note:
4. θ
JA
is measured with the component mounted on a low-effective thermal conductivity test board in free air. See
TB379
for details.
Parameter
Maximum Junction Temperature (Plastic Package)
Maximum Storage Temperature Range
Pb-Free Reflow Profile
Minimum
Maximum
+150
Unit
°C
°C
-65
+150
see
TB493
2.3
Recommended Operating Conditions
Parameter
Minimum
Maximum
Unit
Temperature Range
ICL3207ECx
0
+70
°C
FN4914 Rev.7.00
May.20.19
Page 5 of 18
京公网安备 11010802033920号
EEWORLD
