SnPb end metallization option available upon request
(5% Pb minimum)
Applications
Typical applications include military, space quality and high reliability electronics.
Packaging C-Spec Ordering Options Table (100% Matte Sn and SnPb Terminations)
Packaging Type
1
Bulk Bag/Unmarked
7" Reel/Unmarked
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
1
1
Packaging/Grade
Ordering Code (C-Spec)
Not required (Blank)
TU
7411 (EIA 0603 and smaller case sizes)
7210 (EIA 0805 and larger case sizes)
7081
7082
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
“Bulk Bag” packaging option is not available for Gold (Au) termination finish options and case sizes larger than 2225 (5664 Metric).
2
“Waffle Tray” packaging option is not available for case sizes larger than 2225 (5664 Metric).
3
The terms “Marked” and “Unmarked” pertain to laser marking option of components. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices.
3
Reeling quantities are dependent upon chip size and thickness dimension. When ordering using the “T1K0” packaging option, 1812 through 2225 case
size devices with chip thickness of ≥ 1.9 mm (nominal) may be shipped on multiple 7” reels or a single 13” reel. Additional reeling or packaging options
may be available. Contact KEMET for details.
4
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
5
Additional reeling or packaging options may be available. Contact KEMET for details.
In the real-time power conversion field that continues to demand higher performance and efficiency, it is critical for designers to invest in scalable and sustainable industrial and automotive power c...
I am working on WinCE and want to use the camera under the DShow framework, but it seems difficult. First of all, in WinCE5/6, Microsoft seems to have extracted the Camera module separately and wrote ...
[color=#222222][backcolor=white][font=sans-serif][size=14px]Why is the dsp always in reset state? I connected a 3.3v pull-up resistor and the 3.3v is stable. But the voltage below the pull-up resistor...
Please help me with this serial port problem, please? void ComInStr() interrupt 4 //Serial port interrupt { if(RI) { if (j>4) { j=0; receive=1; //Receive flag set } else { rece[j]=SBUF; j++; } RI=0; }...
# Anxinke PB-02 module evaluation (4) - PHY62XX ADC user guide## This article was first published on EEWORLD. For details, please visit: [EEWORLD evaluation](https://bbs.eeworld.com.cn/elecplay/conten...
The 4*4 keyboard is first arranged with ten numbers from 0 to 9. When the keyboard is pressed for the first time, the first digital tube displays the reading of the key. When it is pressed for the sec...
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
