The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
RIBBON-CABLE LOW-PROFILE FD CONNECTORS
General
The low-profille FD series are rectangular multi-contact
connectors for ribbon-cable IDC termination. The FD
Series are most useful for labor-saving in connection
work and enhancing wiring reliability.
The profile has been minimized to meet the customer
needs for smaller devices. 9, 15, 25 and 37-contact
models are available.
Features
(1) Compact and sturdy due to metal shell.
(2) Can be mounted on the front or back of a panel or
chasis as necessary.
(3) Much lower Profile to permit miniaturization.
(4) Fixes the cable securely by fitting the ribbon cable
clamp with a metal plate in the connector.
(5) Cables, including standard pitch (1.27mm) ribbon
cables, as well as those with 1.38mm pitch (equal
to the D sub), can be connected by replacing the
jig (a jig is required for slit cables).
(6) Discrete cables can be connected by using a multi-
core cable IDC terminator.
Application
Computers, peripherals and terminals, radio equipment, and control equipment.
04/2009
73
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Electrical and Environmental
Electrical and Environmental Characteristics
Current rating
Voltage rating
Insulation
resistance
Contact
resistance
Withstand
voltage
1A
200V AC
1,000MΩ min.
at 500V DC
25mΩ max.
at 100mA DC
650Vr.m.s. AC
for one minute
Shell
Insulator
Contacts
Steel
PBT
Material and Finish
Nickel plating
Black
Beryllium Copper Nickel plating + gold plating
※UL94V-0
Cable specifications
1.38 or 1.27 (N-1)
0.9±0.1
N: No. of cores
Core: AWG♯28 (7/0.127)
1.38 or 1.27
1.38 or 1.27×N
Ordering Informations
FD
B
D
−
25
P
F
（55）
(1) Series Name FD: Insulation displacement
termination
(2) Shell size E, A, B, C
(3) Serial sign for series
(4) No. of pin 9, 15, 25, 37
(5) Type of contacts
P: Male contact
S: Female contact
(6) F: Shell dimpled (male connector only)
(7) (55) Nickel-plated shell
(1) (2) (3)
(4) (5) (6) (7)
Pin Connector
FDBD-25P
（55）
Unit: mm
HRS No
CL211-0444-4-55
CL211-0446-0-55
CL211-0448-5-55
CL211-0450-7-55
No.of pin
9
15
25
37
Part No.
FDED-9P
（55）
FDAD-15P
（55）
FDBD-25P
（55）
FDCD-37P
（55）
A
30.81
B
C
D
E
19
27.2
41.4
57.9
F
19.28
27.55
41.28
57.71
G
5.99
5.99
5.87
5.87
H
1.2
1.2
1.3
1.4
I
15.67
15.67
15.67
15.67
J
2.7
2.7
3.2
3.2
YES
RoHS
16.9 24.99 16.9
39.14 25.24 33.32 25.27
53.04 39.01 47.04 39
69.32 55.47 63.5 55.4
74
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FDBD-25PF
（55）
HRS No
CL211-0604-9-55
CL211-0605-1-55
CL211-0606-4-55
CL211-0607-7-55
No.of pin
9
15
25
37
Part No.
FDED-9PF
（55）
FDAD-15PF
（55）
FDBD-25PF
（55）
FDCD-37PF
（55）
A
B
C
D
E
19.0
27.2
41.4
57.9
F
19.28
27.55
41.28
57.71
G
5.99
5.87
H
1.2
1.3
1.4
15.67
I
J
30.81 16.9 24.99 16.9
39.14 25.24 33.32 25.27
53.04 39.01 47.04 39.0
69.32 55.47
63.5
55.4
Unit: mm
RoHS
2.7
YES
3.2
Female Connector
FDBD-25S
（55）
HRS No
CL211-0445-7-55
CL211-0447-2-55
CL211-0449-8-55
CL211-0451-0-55
No.of pin
9
15
25
37
Part No.
FDED-9S
（55）
FDAD-15S
（55）
FDBD-25S
（55）
FDCD-37S
（55）
A
30.81
B
16.4
C
24.99
D
16.9
E
19
27.2
41.4
57.9
F
19.28
27.55
41.28
57.71
G
6.17
6.17
6.17
6.17
H
1.2
1.2
1.2
1.2
I
15.67
15.67
15.67
15.67
J
Unit: mm
RoHS
2.7
2.7
3.2
3.2
YES
39.14 24.59 33.32 25.27
53.04 38.3 47.04 39
69.32 54.76
63.5
55.4
04/2009
75
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Connector Mounting Method and Mounting Dimensions
Connector mounted on the face of the panel (front mounting)
Note: A slight gap will appear between connector and panel since the
connector must be plugged to the back of the panel.
Unit: mm
Shell size
E
A
B
C
A1
24.99
33.32
47.04
63.5
B1
22
30.3
44
60.5
Connector mounted on the back of the panel (rear mounting)
Unit: mm
Shell size
E
A
B
C
A2
24.99
33.32
47.04
63.5
B2
20.2
28.6
42.5
59.2
76
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
I think this question was asked to Teacher Xia in a forum. I'm bringing it here to let all the experts debate it so that we can understand this question thoroughly!...
I plan to re-draw the peripherals of beaglebone, and I need a lot of Ti components! If I don't buy in bulk, it's hard to get an invoice! So I thought of applying on the Ti official website! I applied ...
I. Introduction The JPEG algorithm is a digital image compression coding algorithm with the characteristics of high compression ratio and low distortion, and has been determined as an international st...
The target machine has a telnet server component, which is downloaded and run. The host (XP) can log in from DOS. However, if the RLOGIN/telnet password protection component is added, there is no resp...
I am a novice. I used to use an ad, which did not require hardware simulation. The program was directly downloaded to the program RAM through the serial port for debugging and running. Now when 2407 i...
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
Microcontrollers (MCUs), which are widely used in automotive electronics, are rapidly facing time and cost pressures. The main advantage of using MCUs has always been to create high-level system in...[Details]
As LEDs continue to improve in almost every aspect of performance and cost, LED lighting is being used in an increasingly wide range of applications, among which LED street lights are a focus of in...[Details]
With the continuous improvement of the requirements of intelligent building security systems and the continuous improvement of people's safety awareness, indoor anti-theft has gradually attracted peop...[Details]
Vertical cavity surface emitting lasers (VCSELs) are gradually replacing traditional edge emitting lasers, especially in low bandwidth and short-distance communication systems where cost factors ar...[Details]
LED technology has made rapid progress, and improvements in chip design and materials have promoted the development of brighter and more durable light sources, and the scope of light source applica...[Details]
D5026A is a driver IC designed by Shanghai Debei Electronics for energy-saving LED display screens. Its design concept is energy-saving and compatible with existing solutions, that is, it can be ...[Details]
0 Introduction
With the rapid development of modern power electronics technology, various power electronic devices have been widely used in various fields such as power systems, industry, an...[Details]
Globally, the market for airbags and other restraint systems consists of different geographical regions, each with its own characteristics and needs. North America first introduced airbags in mass-...[Details]
With the tense global energy situation and the improvement of human environmental protection awareness, the research and development of power batteries is in full swing around the world. At present...[Details]
1. Electromagnetic compatibility design
Electromagnetic compatibility refers to the ability of electronic equipment to work in a coordinated and effective manner in various electromagnetic env...[Details]
Modern communication equipment, portable electronic products, laptops, electric vehicles, small satellites, etc. generally use batteries as power sources and are widely used. However, the batteries...[Details]
O Introduction
Virtual instrument is a new type of instrument developed with
the development of
computer
technology, electronic measurement technology and communication technology. ...[Details]
O Introduction
For people who are in the wild, a question that they are more concerned about is the altitude of the place where they are. However, there are very few such products on the mar...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
