L: output is low level (weak pull down) oscillation stops
SiTime Corporation
Rev. 1.44
990 Almanor Avenue, Suite 200
Sunnyvale, CA 94085
(408) 328-4400
www.sitime.com
Revised January 15, 2010
SiT8002
1 to 125 MHz Programmable Oscillator
Description
The SiT8002 oscillator family is composed of the world’s
smallest, high-performance programmable oscillators. The
SiT8002 is suitable for use in clock generation for consumer,
portable, industrial, automotive, and computation applications.
This oscillator family is packaged in standard low-cost plastic
QFN-type IC packages with footprints that match common
quartz surface mount products.
MEMS resonators are 1000x smaller by volume than quartz
resonators and are built in high volume CMOS fabs instead of
small custom manufacturing facilities. Due to their small size,
massive lot sizes, and simpler manufacturing processes
MEMS oscillators are inherently more reliable, have more
consistent performance and are always in stock.
The SiT8002, by eliminating the quartz crystals, has improved
immunity to the environmental effects of vibration, shock,
strain, and humidity.
To order samples, go to www.sitime.com and click on Request
Sample” link.
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings of the part may cause permanent damage to the part. Actual perfor-
mance of the IC is only guaranteed within the operational specifications not absolute maximum ratings.
Ab
solute Maximum Table
Parameter
Storage Temperature
VDD
Electrostatic Discharge
Theta JA (with copper plane on VDD and GND)
Theta JC (with PCB traces of 0.010 inch to all pins)
Soldering Temperature (follow standard Pb free soldering guidelines)
Number of Program Writes
Program Retention over -40 to 125C, Process, VDD (0 to 3.6V)
–
–
Min.
-65
-0.5
Max.
150
+3.65
6000
75
24
260
1
1,000+
Unit
°
C
V
V
°
C/W
°
C/W
°
C
NA
years
Operating Conditions
Parameter
Supply Voltages,
VDD
[1]
Min.
2.97
2.25
1.7
Extended Commercial Operating Temperature
Industrial Operating Temperature
Maximum Load
Capacitance
[2]
VDD Ramp Time
-20
-40
-
0
Typ.
3.3
2.5
1.8
-
-
-
-
Max.
3.63
2.75
1.9
70
85
15
200
Unit
V
V
V
°
C
°
C
pF
ms
Environmental Compliance
Parameter
Mechanical Shock
Mechanical Vibration
Temperature Cycle
Solderability
Moisture Sensibility Level
Condition/Test Method
MIL-STD-883F, Method 2002
MIL-STD-883F, Method 2007
JESD22, Method A104
MIL-STD-883F, Method 2003
MSL1 @ 260°
C
Notes:
1. The 2.5V device can operate from 2.25V to 3.63V with higher output drive, however, the data sheet parameters cannot be guaranteed. Please contact factory for
this option.
2. The output driver strength can be programmed to drive up to 30pF load. Please contact factory for this option.
Rev. 1.43
Page 2 of 7
www.sitime.com
SiT8002
1 to 125 MHz Programmable Oscillator
DC Electrical Specifications
@VDD = 3.3V ±10%, -40 to 85°
C
Parameter
Output Voltage High
Output Voltage Low
Input Voltage High
Input Voltage Low
Operating Current
Standby Current
Power Up Time
Condition
IOH = -9 mA
IOL = 9 mA
Pin 1
Pin 1
Output frequency = 65 MHz, 15 pF load
Output is weakly pulled down, ST = GND
Time from minimum power supply voltage
Min.
90
-
70
-
-
-
-
Typ.
-
-
-
-
-
30
12
Max.
-
10
-
30
22
50
50
Unit
%Vdd
%Vdd
%Vdd
%Vdd
mA
uA
ms
@VDD = 2.5V ±10%, -40 to 85°
C
Parameter
Output Voltage High
Output Voltage Low
Input Voltage High
Input Voltage Low
Operating Current
Standby Current
Power Up Time
Condition
IOH = -7 mA
IOL = 7 mA
Pin 1
Pin 1
Output frequency = 65 MHz, 15 pF load
Output is weakly pulled down, ST = GND
Time from minimum power supply voltage
Min.
90
-
70
-
-
-
-
Typ.
-
-
-
-
-
30
12
Max.
-
10
-
30
22
50
50
Unit
%Vdd
%Vdd
%Vdd
%Vdd
mA
uA
ms
@VDD = 1.8V ±5%, -40 to 85°
C
Parameter
Output Voltage High
Output Voltage Low
Input Voltage High
Input Voltage Low
Operating Current
Standby Current
Power Up Time
Condition
IOH = -5 mA
IOL = 5 mA
Pin 1
Pin 1
Output frequency = 65 MHz, 15 pF load
Output is weakly pulled down, ST = GND
Time from minimum power supply voltage
Min.
90
-
70
-
-
-
-
Typ.
-
-
-
-
-
30
12
Max.
-
10
-
30
19
50
50
Unit
%Vdd
%Vdd
%Vdd
%Vdd
mA
uA
ms
Rev. 1.43
Page 3 of 7
www.sitime.com
SiT8002
1 to 125 MHz Programmable Oscillator
AC Electrical Specifications
@VDD = 3.3V ±10%, -40 to 85°
C
Parameter
Clock Output Frequency
Frequency Stability
[3]
Condition
Inclusive of initial stability, operating temperature,
rated power supply voltage change, load change,
aging, shock and vibration
First year
Output frequency= 1 MHz to 125 MHz
15 pF Load, 20% to 80% VDD
15 pF Load, 80% to 20% VDD
Output frequency = 24 MHz
Output frequency = 100 MHz
Min.
1
-30
-50
-100
-
45
-
-
-
-
Typ.
-
-
-
-
-
-
1.0
1.0
-
-
Max.
125
+30
+50
+100
1
55
2.0
2.0
±98
±60
Unit
MHz
ppm
ppm
ppm
ppm
%
ns
ns
ps
ps
Aging
Clock Output Duty Cycle
Clock Output Rise Time
Clock Output Fall Time
Pk-pk Period Jitter
@VDD = 2.5V ±10% or 2.8 ±10%, -40 to 85°
C
Parameter
Clock Output Frequency
Frequency Stability
[3]
Inclusive of initial stability, operating temperature,
rated power supply voltage change, load change,
aging, shock and vibration
First year
Output frequency = 1MHz to 125MHz
15 pF Load, 20% to 80% VDD
15 pF Load, 80% to 20% VDD
Output frequency = 24 MHz
Output frequency = 100 MHz
Condition
Min.
1
-30
-50
-100
-
45
-
-
-
-
Typ.
-
-
-
-
-
-
1.0
1.0
-
-
Max.
125
+30
+50
+100
1
55
2.0
2.0
±130
±60
Unit
MHz
ppm
ppm
ppm
ppm
%
ns
ns
ps
ps
Aging
Clock Output Duty Cycle
Clock Output Rise Time
Clock Output Fall Time
Pk-pk Period Jitter
@VDD = 1.8V ±5%, -40 to 85°
C
Parameter
Clock Output Frequency
Frequency
Stability
[3]
Inclusive of initial stability, operating temperature,
rated power supply voltage change, load change,
aging, shock and vibration
First year
Output frequency = 1 MHz to 65MHz
Output frequency = 65 MHz to 125MHz
Clock Output Rise Time
Clock Output Fall Time
Pk-pk Period Jitter
15 pF Load, 20% to 80% VDD
15 pF Load, 80% to 20% VDD
Output frequency = 24 MHz
Output frequency = 100 MHz
Notes:
3. ±30 ppm is available only for VDD=2.5V or 3.3V.
Condition
Min.
1
-50
-100
-
45
40
-
-
-
-
Typ.
-
-
-
-
-
-
1.0
1.0
-
-
Max.
125
+50
+100
1
55
60
2.0
2.0
±185
±100
Unit
MHz
ppm
ppm
ppm
%
%
ns
ns
ps
ps
Aging
Clock Output Duty Cycle
Rev. 1.43
Page 4 of 7
www.sitime.com
SiT8002
1 to 125 MHz Programmable Oscillator
Ordering Information
SiT8002AC-14-33E - 123.12345T
Packaging:
Part Family
“SiT8002”
Revision Letter
“A” is the revision
Temperature Range
“C” Commercial, -20 to
o
70C
“I” Industrial, -40 to
o
85C
Voltage Supply
Output Drive Strength
[4]
“
-
” Default
“18” for 1.8V ± 10%
“25” for 2.5V ± 10%
“28” for 2.8V ± 10%
“33” for 3.3V ± 10%
Frequency Tolerance
“3” for ± 50 PPM
“4” for ± 100 PPM
“8” for ± 30 PPM
Feature Pin
“E” for Output Enable
“S” for Standby
“T” for Tape & Reel (3Ku Reel)
“Y” for Tape & Reel (1Ku Reel)
Blank for Bulk
Frequency
1.00000 to 125.00000 MHz
Package Size
“1” 2.5 x 2.0 mm
“2” 3.2 x 2.5 mm
“3” 5.0 x 3.2 mm
“4” 7.0 x 5.0 mm
Note:
4. Contact SiTime for different output drive strength options.
This year, we were not allowed to set off fireworks in our neighborhood, so the sound of firecrackers was much less. I actually saw a lot of stars at night, on the first day of the Chinese New Year. A...
Opened \\.\pipe\com_1
Waiting to reconnect...
Connected to Windows XP 2600 x86 compatible target, ptr64 FALSE
Kernel Debugger connection established.(Initial Breakpoint requested)
Symbol search path i...
I'm working on the driver of NXP's FM-RDS chip TEA5990 recently, but I can't find any information. Is there anyone who has done this before? Please give me some information. It would be even better if...
According to TI's introduction, I know that all the routines of C2000 are in controlSUITE. You can download the software in the C2000 column of TI website. [url=http://www.ti.com/lsds/ti/microcontroll...
I customized a system using platform builder 5.0. I had some problems when adding a custom driver. 1. How do I view files under Windows in CE? Normally, I can only see shortcuts. How do I view the com...
The mass production process of the new generation of cockpit platform has started, and the smart cockpit market has entered a new bonus cycle of technology iteration and platform upgrade.
...[Details]
Industrial computers with GPUs leverage powerful parallel processing to build deep learning models to analyze and respond to optical inputs. The systems develop an understanding of visual data to i...[Details]
A human-machine interface (HMI) refers to the platform used by people to operate a PLC. This platform provides an interface between programs and humans, serving as a medium for information transmis...[Details]
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Office (USPTO) for a patent for a door anti-collision system that may be used in future Ford vehicl...[Details]
Tools/Materials
Yitong Chuanglian MODBUS to PROFIBUS Gateway YT-PB-03
Siemens s7-300
This article describes how to configure the YT-PB-03 MODBUS to PROFIBUS gat...[Details]
In the wave of electrification and intelligence in the automotive industry, the E/E architecture is transitioning from distributed to domain control and then to regional architecture.
Th...[Details]
Bosch, an "old money" company, is radical in its investment in new technologies.
Bosch announced at this year's Technology Day that it will invest more than 2.5 billion euros (about 21.1...[Details]
Photovoltaic water pump inverter, photovoltaic water pump control system and control method
This application provides a photovoltaic water pump inverter, a photovoltaic water pump control sys...[Details]
On August 15, CCTV News quoted Reuters as saying that sources revealed that the US government has implanted secret trackers in some shipments of technology products using AI chips in an attempt to ...[Details]
Ever since smartphones became popular, their battery life has become a major concern. Although current phones often have large batteries of 3,000 to 4,000 mAh, heavy users still have to charge thei...[Details]
It is undeniable that batteries, as the power source of electric vehicles, are placed in the most important position. There are many factors that affect the cruising range of pure electric vehicles...[Details]
As new dashcams gradually enter the market, they serve more than just a camera to record road conditions. They can also take photos, share videos, provide navigation, connect to WeChat and QQ, and ...[Details]
A speaker box, also known as a loudspeaker enclosure, combines high, mid, and low-frequency speakers within a specially designed enclosure. A crossover network routes high, mid, and low-frequency s...[Details]
With the deep integration of the Industrial Internet and intelligent manufacturing, industrial data has become a core enterprise asset. Its security is directly related to production continuity, in...[Details]
A new wave is coming, and the supply chain often leads the way.
With
the widespread adoption of
smart cars
,
LiDAR
has become a must-have feature in smart cars, like a saf...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
