3M
™
EM Eye Meter —
ESD Event, Electromagnetic Field
and RF Signal Measurements
The Power of a Benchtop Meter in Your Pocket
Whether you are in charge of product development, EMC compliance or ESD
prevention, equipment installation and maintenance, or if you are involved in
research, your work depends on the test equipment you have available. What you can
or cannot achieve depends on the ability to take various measurements, to collect
and store data, to present the data in the most convenient way, and to process it on a
computer, along with the portability of your instruments.
To make your job a little easier, 3M has developed the EM Eye Meter – one of the
smallest and most versatile instruments for measuring EM fields, RF signals and
ESD events determined by the sensor connected to the EM Eye Meter. This meter
allows you to expand your instrumentation at a lower cost since adding a sensor is
less expensive than purchasing a completely new instrument. Weighing just 9 3/4
ounces, the EM Eye Meter can literally fit in the palm of your hand or in your shirt
pocket. The touch screen and color display make this instrument very easy to use.
ESD Events Detection
– The EM Eye Meter is capable of detecting ESD events and
characterize them in most HBM, CDM and MM models. It is capable of rejecting
non-ESD related events, making analysis easier. The meter is easy to operate and
can be used by almost anyone who is involved with ESD. It provides information on
estimated discharge voltages at a specific location, what time it occurred, and how
many discharges have occurred. The meter’s small size allows it to be used in tight
locations inside the tools or in a wider area of interest. For extended temperature
environments, the EM Eye Meter uses an optional remote antenna which will work
under most conditions. All information is recorded on an SD
™
card for easy review
and retrieval of data.
Electromagnetic Field (EMF) Measurement
– By simply placing the EMF sensor
head into the EM Eye Meter base, the EM Eye Meter transforms into a dedicated
EMF meter, a power density meter and an EIRP meter. The EM Eye Meter detects
and measures high frequency electric fields that may be present in equipment, tools,
circuit boards or on any process in a manufacturing area. The EM Eye Meter also
measures high frequency electric fields from mobile phones, over-the-air TV signals,
wireless LANs and any other source generating fields within its specification. The
EM Eye Meter comes with a miniature directional antenna that measures just one
parameter. The meter then can calculate several parameters from that original one.
The directional antenna reduces the influence of ambient electromagnetic fields
when measuring emission coming from the specific source. So whether you’re
in the fields of product design, mobile phones, TV signals or wireless LAN, the
portable EM Eye Meter is a helpful and important part of your toolbox.
RF Signal Sensor
– The EM Eye Meter, with the replacement RF sensor head, is
capable of measuring RF signals. Usually used by radio communications designers
and engineers, the EM Eye Meter will be able to provide a readout of RF signal
voltages. The EM Eye Meter offers exceptional sensitivity and linearity.
3M
™
EM Eye Meter
3M
™
EM Eye Meter User Features
Modular Construction
The 3M EM Eye Meter with the modular construction concept can expand to different applications.
With the current design, it measures ESD events, electromagnetic fields (EMF), power density,
effective isotropically radiated power and radio frequency (RF).
™
Touch Screen to Power ON
The EM Eye Meter is designed with a modern user interface. All buttons and controls are within the
display itself. With its display and touch screen, it is easier for users to quickly navigate through the
features that were built into the meter.
Speaker and Headphone Alarm Outputs
The EM Eye Meter, with a speaker and headphones, allows flexible means for audible indications,
beeping or “warbling” like a radio. If one is in a noisy place, a headphone jack for optional head-
phones can be used for clearer audio.
Remote or Local Antenna Selection
3M recognizes that an engineer may be working in tight physical locations. The EM Eye Meter is
small and portable with expansion accessories that can be fitted in hard-to-reach places, and in hot
or cold temperatures.
Easy Data Logging to Memory Card
The EM Eye Meter supports data logging by using a miniSD
™
card and exports to an Excel
spreadsheet. Having data at hand enables quick analysis. Solutions can be decided quickly and
can be measured on the spot.
Specifications
General
Overall Functions
ESD event detector
Electromagnetic field (EMF) meter
Power density meter
Effective isotropically radiated power (EIRP) meter
Radio frequency (RF) meter
Speaker: beep or analog audio with volume control
MiniSD
™
Card, FAT32 format,
SanDisk 512Mb, 1GB, 2GB
(For other card types, please contact 3M for verification.)
Peaks: 1-360 seconds Average signals: 0.1-360 seconds
1) Lithium-Ion, internal
2) Lithium coin, internal
Batteries are not user serviceable. Please contact 3M for service.
New batteries: ~ 8 hours at 10% brightness; ~ 4 hours at 100% brightness
Charging time: 2 hours
10 - 40°C
30% - 70% RH
Audio Indicators
External Data Storage
Recording Interval
Battery Type
Battery Charge Life
Operating Temperature
Relative Humidity
3M
™
EM Eye Meter Specifications, continued
General
Display
Size
Headphone Jack
Antenna/Cable Connector
Power Supply/Charger
TFT RGB LCD 240 x 320 pixels
65 W x 32 D x 105 L mm (2.6 W x 1.3 D x 4.2 L in.)
3.5 mm (1/8 in.)
Reverse SMA
Input: 100-240 V ~ 50-60 Hz 0.2 A
Output: 5.0 V 1000 mA
Center: positive, ID 1.3 mm; OD 3.5 mm
Plug converter: EU, US, China, Korea, Taiwan, Philippines
Power supply/charger regulatory marks:
Applications
ESD Events
ESD Audit and Survey
ESD Environ Diagnostics
Reduction of Yield Losses Caused by ESD
Data Logging for ESD Reports and for Statistical Analysis
Electromagnetic Fields
EMC Diagnostics
Antenna Installation and Maintenance
Telecommunications (CW, TDMA/GSM/DECT)
RF Safety
Diagnostics of Power Equipment
Interference Analysis
Site Survey
RF Signals
Product Design
R&D
Service, Repair and Maintenance of RF Equipment
Features
ESD Events
Detects ESD events and locates their sources
Measures the magnitude of individual ESD events
Counts ESD events
Logs ESD events with their magnitude and time/date stamp for
generating ESD environment diagrams and records
Lets you listen to ESD event "crackles" via internal speaker or
optional headphones
Electromagnetic Fields
Measures electromagnetic field strength over a wide dynamic
range
Measures both continuous and pulsed fields
Measures field strength and power density
Measures EIRP of a transmitter
Locates sources of EMI
RF signals
Broad frequency range (1 MHz to 2.5 GHz)
Wide dynamic range
ESD Event Sensor Specifications
ESD Event Detection Modes
Raw Input Resolution
Threshold Resolution
Distance Detection Range
ESD Counter Range
Hardware Setup
Antenna Options
Human body model (HBM), machine model (MM), charged device model (CDM), raw input (ESD),
all signals (ESD and other noise signals)
1 mV (1 mV - 15 mV); 15 mV (1 mV - 1500 mV)
1-10 Volts, 10-990 Volts. Raw input: 1 mV (1 - 15 mV) and 15 mV (15 - 1500 mV)
1.3 cm (0.5 in.) – 38.1 cm (15.0 in.)
0 – 32,767 counts
Brightness, auto off-time
Local or remote (CTC113 for regular use, or CTC115 for high temp use)
3M
™
EM Eye Meter
Electromagnetic Field Sensor
Function Modes
Peak Range
Electromagnetic Field
0.001 – 20.00 V/m
Power Density Meter
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
EIRP Meter
Min: 0.001W
Max: 5333 W @
20 m.
NA
NA
NA
W-m
0.25 – 20.0 m
0.82 – 65.60 ft.
-40.0 to 40.0 dBm-1
Brightness, off-time, antenna factor (AF)
10 MHz – 2.5 GHz
Average Range
Memory Reference Range
Current Reference Range
Units
EIRP Distance
Antenna Factor Range
Hardware Setup
Frequency Response
RF Sensor Specifications
Unit Modes
Dynamic Range
Reference Range for Peak/Average
Record Interval Range
Record Averaging Range
External ATT
Frequency Bandwidth
0.01 – 20.00 V/m
0.01 – 20.00 V/m
0.01 – 20.00 V/m
V/m, dBuV/m
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
W/cm2
dBuV, dBm, mV
Min:52 dBuV Max 106.9 dBuV; Min: -55dBm-Max: 0 dBm; Min: 0.4mV Max: 223.6mV
0.100 - 224.0 mV
1 – 360 seconds
0.1 – 360 seconds
00 dB / 20 dB
1 MHz to 2.5 GHz
Product Ordering Information
Model Number
CTM048-2128
CTM048-21
CTM048-28
CTM048-29
CTC021
CTC028
CTC029
Description
EM Eye Meter with ESD and EMI Sensors, 80-0012-2091-4
EM Eye Meter with ESD Sensor, 80-0012-2092-2
EM Eye Meter with EMI Sensor, 80-0012-2093-0
EM Eye Meter with RF Sensor, 80-0012-2094-8
ESD Sensor, 80-0012-2095-5
EMI Sensor, 80-0012-2096-3
RF Sensor, 80-0012-2097-1
If you’re already using the EM Eye Meter and would like to add another sensor, you can order:
3M is a trademark of 3M Company.
SD, miniSD and microSD are trademarks of SD Association in Japan.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such
use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no
force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one year from the time of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period stated
above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M
will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Electronic Solutions Division
Static Control Products
6801 River Place Blvd.
Austin, TX 78726-9000
1-866-722-3736
www.3Mstatic.com
Please recycle. Printed in U.S.A.
© 3M 2009. All rights reserved.
98-0799-0793-1
京公网安备 11010802033920号
EEWORLD
