[color=#333333][size=14px][size=10.5pt]1 System Solution[/size][/size][align=left][size=10.5pt][size=10.5pt]1.1 Demonstration and Selection of Master Control[/size][/size][align=left][size=10.5pt][siz...
I added the driver to the kernel compilation and then burned it to the board. I found that the node could not be created automatically and I had to enter the mknod command manually. Please tell me how...
Cursor capture is the process of driving the position of the spatial coordinates of the ' logical cursor ' on the design file, such as the PCB , from the pixel position of the physical mouse cursor on...
After the system starts, I cannot enter the system interface. The display stays at Attached TCP/IP interface to rt10. Attaching network interface 1o0. . . done. loading. . . 64390 Starting at 0x308000...
After power-on, 3 lights are always on and the status light is red. I disassembled the KIT2 and re-burned the firmware using the original KIT2, but it still doesn't work. Please help me!
MPLAB IDE v8....