MCR10FZPJ331 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> MCR10FZPJ331

MCR10FZPJ331: Descriptionres 330 ohm 1/8W 5% 0805 smd; CategoryPassive components; File Size353KB，14 Pages; ManufacturerROHM Semiconductor; Websitehttps://www.rohm.com/; Environmental Compliance

Download Datasheet Parametric View All

MCR10FZPJ331 Overview

res 330 ohm 1/8W 5% 0805 smd

MCR10FZPJ331 Parametric

Parameter Name	Attribute value
Datasheets
MCR10 FZP Series
Product Photos
MCR006
Standard Package	10,000
Category	Resistors
Family	Chip Resistor - Surface Mou
Packaging	Tape & Reel (TR)
Resistance (Ohms)	330
Tolerance	±5%
Power (Watts)	0.125W, 1/8W
Compositi	Thick Film
Features	-
Temperature Coefficie	±200ppm/°C
Package / Case	0805 (2012 Metric)
Supplier Device Package	0805 (2012 Metric)
Size / Dimensi	0.079" L x 0.049" W (2.00mm x 1.25mm)
Heigh	0.024" (0.60mm)
Number of Terminations	2
Other Names	1056-MCR10FZPJ3311056-MCR10FZPJ331-CHP

Preview

Download Datasheet

View All

PRODUCTS

FIXED THICK FILM CHIP RESISTORS

TYPE

ＭＣＲ１０

Series

PAGE

1/14

SPECIFICATION

PRODUCTS: FIXED THICK FILM CHIP RESISTORS

TYPE: MCR10 FZP SERIES

ROHM CO., LTD．RESISTOR DIV．

DESIGN

CHECK

APPROVAL

DATE:

30/OCT/2012

REV. ０３８Ｅ

SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ

TSZ22111½04½002

PRODUCTS

FIXED THICK FILM CHIP RESISTORS

TYPE

ＭＣＲ１０

Series

PAGE

2/14

< Specifications (Precautions and Prohibitions) >

●

Safety Precautions

1) The products are designed and produced for application in ordinary electronic equipment (AV equipment,

OA equipment, telecommunication equipment, home appliances, amusement equipment, etc.).

If the products are to be used in devices requiring extremely high reliability (medical equipment,

transport equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment

including car accessories, safety devices, etc.) and whose malfunction or operational error may endanger

human life and sufficient fail-safe measures, please consult with the ROHM sales staff in advance. If

product malfunctions may result in serious damage, including that to human life, sufficient fail-safe

measures must be taken, including the following:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits in the case of single-circuit failure

2) The products are designed for use in a standard environment and not in any special environments.

Application of the products in a special environment can deteriorate product performance. Accordingly,

verification and confirmation of product performance, prior to use, is recommended if used under the

following conditions:

[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents

[b] Use outdoors where the products are exposed to direct sunlight, or in dusty places

[c] Use in places where the products are exposed to sea winds or corrosive gases, including

, H

S, NH

, SO

, and NO

[d] Use in places where the products are exposed to static electricity or electromagnetic waves

[e] Use in proximity to heat-producing components, plastic cords, or other flammable items

[f] Use involving sealing or coating the products with resin or other coating materials

[g] Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after

soldering

[h] Use of the products in places subject to dew condensation

3) The products are not radiation resistant.

4) Verification and confirmation of performance characteristics of product, after on-board mounting, is

advised.

5)In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse)is

Applied, confirmation of performance characteristics after on-board mounting is strongly recommended.

Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state

Loading condition may negatively affect product performance and reliability.

6) De-rate Power Dissipation(Pd)depending on Ambient temperature(Ta).

7) Confirm that operation temperature is within the specified range described in product specification.

8) Product may be damaged when the impact, such as downfall is given.

9) Failure induced under deviant condition from what defined in the product specification can be not be

Guaranteed.

10)When product safety related problems arises, please immediately inform to ROHM, and consider

technical counter measure.

REV.：

０３８Ｅ

SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ

TSZ22111½05½002

PRODUCTS

FIXED THICK FILM CHIP RESISTORS

TYPE

ＭＣＲ１０

Series

PAGE

3/14

< Specifications (Precautions and Prohibitions) >

●

Precaution for Mounting/Circuit board design

1) When a highly active halogenous (chlorine, bromine, etc.)flux is used, the remainder of flux may

negatively affect product performance and reliability.

2)In principle, the reflow soldering method must be used; if flow soldering method is preferred,please

Consult with the company in advance.

3) Pay attention to the soldering condition in order to avoid problems due to silver absorption into solder.

4) Be careful when pick up the products with tweezers.

There may be a case that the overcoat and /or the body can be chipped.

5) Soldering tip shall not touch the product when install product manually.

●

Precautions Regarding Application Examples and External Circuits

1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the

characteristics of the products and external components, including transient characteristics, as well as

static characteristics.

2) The application examples, their constants, and other types of information contained herein are applicable

only when the products are used in accordance with standard methods. Therefore, if mass production is

intended, sufficient consideration to external conditions must be made.

●

Precaution for Electrostatic

This product is Electrostatic sensitive product, which may be damaged due to Electrostatic discharge.

Please take proper caution during manufacturing and string so that voltage exceeding Product maximum

rating won’t be applied to products. Please take special care under dry condition(e.g. Grounding of human

body /equipment /solder iron, isolation from charged objects, setting of Ionizer, friction prevention and

temperature /humidity control).

●

Precaution for strage/Transportation

1)Product performance and soldered connections may deteriorate if the products are stored in the following

places:

[a] Where the products are exposed to sea winds or corrosive gases, including Cl

, H

S, NH

, SO

and NO

[b] Where the temperature or humidity exceeds those recommended by the Company

Temperature:5―40℃, Humidity 30―80% (Put condition for individual product)

[c] Storage in direct sunshine or condensation

[d] Storage in high Electrostatic

2) Even under ROHM recommended storage condition, solderability of products over 1 year old

(Put condition for each product)may be degraded.

It is strongly recommended storage time period.

½Recommended

storage condition：Temperature 5―40℃, Humidity 30―80%(Put condition for

individual product)

3) Store / transport cartons in the correct direction, which is indicated on a carton as a symbol.

Otherwise bent leads may occur due to excessive stress applied when dropping of a carton..

●

Precaution for product label

QR code printed on ROHM product label is only for internal use, and please do not use at customer site.

It might contain a internal part number that is inconsistent with an product part number.

●

Precaution for disposition

When disposing products please dispose them properly with a industry waste company.

●

Precautions for Foreign exchange control regulation

ROHM has not determined whether or not the products are considered “a controlled product or

labor ” as specified in the Foreign Exchange and Foreign Trade Control Law.

Accordingly, if exportation of the products, either separately or integrated in another company’s

products, is intended, or giving the products to persons who are not residents is planed, additional steps

are required, based upon the appropriate regulations.

REV.：

０３８Ｅ

SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ

TSZ22111½05½002

Recommended Resources

Dual output regulated power supply circuit

Another simple method of measuring wire continuity

Schematic diagram of microcomputer low-frequency electrotherapy instrument

Ultrasonic receiving circuit

Sequential parking circuit for two electric motors

Computer motherboard circuit diagram 820 1_61

MSP430FR5969 study notes---gpio: I used the emptyproject in the library and added code to flash two LEDs alternately. The code is as follows. #include "driverlib.h" //******************************************************************...; 王项电子 Microcontroller MCU

GD32E231 Learning 3: SPI driving OLED: [align=left]Before, I used the IO port to simulate SPI to drive the OLED. After all, the speed of the IO port is slower than SPI, and there will be obvious delays when refreshing. It is much better to...; wudianjun2001 GD32 MCU

SD card read EBOOT.BIN: I originally had a 2440 source code that I could modify, and I thought that I didn't need to modify the SD card part, so it would be easy. But I found that the 2440 and my 2416 have quite different SD...; lifuguo Embedded System

What documents does the patch welding factory need?: Recently, due to the epidemic, we have been closed twice in less than a month. The order backlog is serious and I want to find a patch welding factory for welding. Since the patch was done manually be...; bigbat PCB Design

About RIL_Initialize callback function: hrRilInit = RIL_Initialize(1, FDNResultCallback, FDNNotifyCallback, dwRILNotificationClasses, NULL, &g_hRil ); When are the callback functions FDNResultCallback and FDNNotifyCallback in the above func...; lsx2002 Embedded System

Microcontroller courseware++++Beihang: Microcontroller courseware++++The one from Beihang University is very good, real experience!...; hnkjdx720 MCU

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components