• Best-selling guard lock safety-door switch available in several
compact, multi-contact models
• Selectable Operation Key insertion direction and adjustable
mounting ensure installation flexibility
• Built-in switches with multiple-contact construction are available
• Key holding force of 1,300 N minimum
• Can be used for either standard loads or microloads
• Lineup includes models with a conduit size of M20
• IP67 degree of protection
• Variety of metallic heads available
g
Specifications
Standards and ec Directives
conforms to the following ec Directives:
• Machinery Directive
• Low Voltage Directive
• EN 1088
• EN 60204-1
• GS-ET-19
certified Standards
certification
body
TÜV SÜD
UL *1
CQC (CCC)
KOSHA *2
Standard
EN 60947-5-1
(certified direct opening)
UL 508, CSA C22.2 No.14
GB14048.5
EN60947-5-1
file no.
Consult your
representative for
details.
E76675
2003010305064267
2005-196
S
Ul/cSA (Ul 508, cSA c22.2 no. 14)
A300
rated
voltage
120 VAC
240 VAC
Q300
rated
voltage
125 VDC
250 VDC
carry
current
2.5 A
current (A)
make
0.55
0.27
Break
0.55
0.27
Volt-amperes (VA)
make
69
Break
69
carry
current
10 A
current (A)
make
60
30
Break
6
3
Volt-amperes (VA)
make
7,200
Break
720
Solenoid coil characteristics
item
type
24 VDc
24 VDC
-15%
Approx.
200 mA
+10%
110 VAc
110 VAC
±10%
Approx.
50 mA
Class F (130°C max.)
230 VAc
230 VAC
±10%
Approx.
30 mA
*1. Certification for CSA C22.2 No. 14 is certified by the UL mark.
*2. Only certain models have been certified.
Rated operating
voltage (100% ED)
Current consumption
Insulation Class
certified Standard ratings
tÜV (en 60947-5-1), ccc (gB14048.5)
item
Utilization category
Ac-15
3A
240 V
Dc-13
0.27 A
250 V
Rated operating current (Ie)
Rated operating voltage (Ue)
indicator characteristics
item
Rated voltage
Current consumption
Color (LED)
type
leD
10 to 115 VAC/VDC
Approx. 1 mA
Orange
Note: Use a 10 A fuse type gI or gG that conforms to IEC 60269 as a short-
circuit protection device. This fuse is not built into the Switch.
g64
OmrOn Scientific technOlOgieS, inc.
USA
Tel. 1/888/510-4357
canada
Tel. 1/866/986-6766
For the Latest Information
On the Internet:
www.sti.com
or
www.omron.ca
D4nl
Safety interlock Switches
connections
contact form
Indicates conditions where the Key is inserted and the lock is applied. Terminals 12 and 41 are connected internally (as per GS-ET-19).
contact
(door open/closed
detection and lock
monitor)
contact form
Door open/
lock
closed
monitor
detection
Door open/
closed detection
Lock monitor
model
Operating pattern
Lock position
remarks
D4NL-□AF□-□
1NC/1NO + 1NC/1NO
Zb
11
33
12
34
41
53
Zb
42
54
11-42
33-34
53-54
Stroke
Operation
Key insertion
completion position
Extraction
completion
position
ON
Only NC contacts 11-12
have a certified direct
opening mechanism.
The terminals 11-42,
33-34, and 53-54 can be
used as unlike poles.
Only NC contacts 11-12
have a certified direct
opening mechanism.
The terminals 11-42,
33-34, and 51-52 can be
used as unlike poles.
Only NC contacts 11-12
and 31-32 have a
certified direct opening
mechanism.
The terminals 11-42,
31-32, and 53-54 can be
used as unlike poles.
Only NC contacts 11-12
and 31-32 have a
certified direct opening
mechanism.
The terminals 11-42,
31-32, and 51-52 can be
used as unlike poles.
Only NC contacts 11-12
and 21-22 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 33-34, and 53-54
can be used as unlike
poles.
Only NC contacts 11-12
and 21-22 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 33-34, and 51-52
can be used as unlike
poles.
Only NC contacts 11-12,
21-22, and 31-32 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 31-32, and 53-54
can be used as unlike
poles.
Only NC contacts 11-12,
21-22, and 31-32 have a
certified direct opening
mechanism.
The terminals 11-42,
21-22, 31-32, and 51-52
can be used as unlike
poles.
Lock position
Door open/
closed detection
Lock monitor
D4NL-□BF□-□
1NC/1NO + 2NC
11
33
Zb
12
34
41
51
Zb
42
52
11-42
33-34
51-52
Stroke
Operation
Key insertion
completion position
Extraction
completion
position
ON
Lock position
Door open/
closed detection
Lock monitor
D4NL-□CF□-□
2NC + 1NC/1NO
11
31
Zb
12
32
Zb
41
53
42
54
11-42
31-32
53-54
Stroke
Operation
Key insertion
completion position
Extraction
completion
position
ON
g
Lock position
Door open/
closed detection
Lock monitor
D4NL-□DF□-□
2NC + 2NC
Zb
11
31
12
32
41
51
Zb
42
52
11-42
31-32
51-52
Stroke
Operation
Key insertion
completion position
Extraction
completion
position
ON
Lock position
Door open/
closed detection
Lock monitor
Zb
Zb
12
22
34
41
53
42
54
D4NL-□EF□-□
2NC/1NO + 1NC/1NO
11
21
33
11-42
21-22
33-34
53-54
Stroke
Operation
Key insertion
completion position
Extraction
completion
position
ON
Lock position
Door open/
closed detection
Lock monitor
Zb
Zb
12
22
34
41
51
42
52
D4NL-□FF□-□
2NC/1NO + 2NC
11
21
33
11-42
21-22
33-34
51-52
Operation
Key insertion
completion position
ON
Stroke
Extraction
completion
position
Lock position
Door open/
closed detection
Lock monitor
D4NL-□GF□-□
3NC + 1NC/1NO
Zb
11
21
31
12
22
32
41
53
Zb
42
54
11-42
21-22
31-32
53-54
Operation
Key insertion
completion position
ON
Stroke
Extraction
completion
position
Lock position
Door open/
closed detection
Lock monitor
Zb
Zb
12
22
32
41
51
42
52
D4NL-□HF□-□
3NC + 2NC
11
21
31
11-42
21-22
31-32
51-52
Stroke
Operation
Key insertion
completion position
Extraction
completion
position
ON
OmrOn Scientific technOlOgieS, inc.
USA
Tel. 1/888/510-4357
canada
Tel. 1/866/986-6766
For the Latest Information
On the Internet:
www.sti.com
or
www.omron.ca
g65
D4nl
Safety interlock Switches
Dimensions and Operating characteristics
Switches
D4nl-□□□□-B
15.5
30.5
Pre-travel distance
8
(mm)
Red
Black
10.0
15.3
Four, head mounting screws
Operation Key
Three, 4.3-dia. holes
4
29
6.5
Operating
characteristics
Key insertion force
Key extraction
force
Pre-travel distance
movement before
being locked
D4nl-□□□□-
BS
15 N max.
30 N max.
9 mm max.
3 mm min.
28.5 4.4
Dummy cap
Indicator
UNLOCK
32
±0.2
6.5
29
0.5
59
(13.3)
LOCK
(55.8)
Five, cover
mounting screws
(32.3)
55
±0.2
(3)
(95)
4
0.5
35.5
5
Release key
(30.7)
(57.9)
79
±0.2
(88.5)
4.5
Conduit cap
Cap screw
29
6.5
(15.3)
g
(10)
UNLOCK
LOCK
Conduit opening
D4nl-□□□□-B4
15.5
30.5
8
Red
Pre-travel distance
Black
10.0
15.3
Four, head mounting screws
Operation Key
Three, 4.3-dia. holes
4
29
6.5
Operating
characteristics
Key insertion force
Key extraction force
Pre-travel distance
movement before
being locked
D4nl-□□□□-
B4
15 N max.
30 N max.
9 mm max.
3 mm min.
28.5 4.4
Dummy cap
Indicator
UNLOCK
32
±0.2
6.5
29
0.5
59
(13.3)
LOCK
(55.8)
Five, cover
mounting screws
(95)
(32.3)
55
±0.2
(3)
4
Cap screw
4.5
Conduit cap
29
6.5
(15.3)
0.5
35.5
5
M8 hexagonal material
or equivalent
8
21
Releasing tool
Release key
(provided)
10.5
(10)
(30.7)
(57.9)
79
±0.2
(88.5)
UNLOCK
LOCK
Conduit opening
Notes:
1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. There are fluctuations in the contact ON/OFF timing for Switches with multiple poles (2NC, 2NC/1NO, or 3NC). Confirm performance before application.
g66
OmrOn Scientific technOlOgieS, inc.
USA
Tel. 1/888/510-4357
canada
Tel. 1/866/986-6766
For the Latest Information
On the Internet:
www.sti.com
or
www.omron.ca
D4nl
Safety interlock Switches
Dimensions and Operating characteristics (continued)
D4nl-□□□□-BS
15.5
30.5
Pre-travel distance
8
(mm)
Red
Black
10.0
15.3
Four, head mounting screws
Operation Key
Three, 4.3-dia. holes
4
29
6.5
Operating
characteristics
Key insertion force
Key extraction
force
Pre-travel distance
movement before
being locked
D4nl-□□□□-
BS
15 N max.
30 N max.
9 mm max.
3 mm min.
28.5 4.4
Release key
Indicator
UNLOCK
32
±0.2
6.5
29
0.5
59
(13.3)
LOCK
(31.5)
(55.8)
Five, cover
mounting screws
(95)
(32.3)
55
±0.2
(3)
4
Cap screw
4.5
Conduit cap
29
6.5
(15.3)
0.5
35.5
5
Dummy cap
(30.7)
(57.9)
79
±0.2
(88.5)
UNLOCK
LOCK
Conduit opening
D4nl-□□□□-B4S
15.5
30.5
Pre-travel distance
8
g
15.3
Red
10.0
Four, head mounting screws
Operation Key
Three, 4.3-dia. holes
4
29
6.5
Black
28.5 4.4
Release key
Indicator
UNLOCK
Operating
characteristics
Key insertion force
Key extraction force
Pre-travel distance
movement before
being locked
D4nl-□□□□-
B4S
15 N max.
30 N max.
9 mm max.
3 mm min.
32
±0.2
6.5
29
0.5
59
(13.3)
LOCK
(31.5)
(55.8)
Five, cover
mounting screws
(30.7)
(57.9)
79
±0.2
(88.5)
(32.3)
55
±0.2
(3)
(95)
4
Cap screw
4.5
Conduit cap
29
6.5
(15.3)
0.5
35.5
5
Releasing tool
Dummy
(provided)
cap
10.5
21
M8 hexagonal material
or equivalent
8
Notes:
1. Unless otherwise specified, a tolerance
of ±0.4 mm applies to all dimensions.
2. There are fluctuations in the contact
ON/OFF timing for Switches with multiple
poles (2NC, 2NC/1NO, or 3NC). Confirm
performance before application.
UNLOCK
LOCK
Conduit opening
Operation Keys
D4DS-K1
7
30
15
7
Four, 2.15R
17.5
13
4.3
13
Black
28
D4DS-K3
14
4
28
8 dia.
4.5 dia.
9 dia.
Angle adjustment bolt
13
20°
2
6.3
15
28
2
30
40
56
D4DS-K2
9
30
28
6
10.5
7
15
7
Four, 2.15R
D4DS-K5
20.9
4
24.6
22.5
Mounting Holes
(Enlargement)
17
15
4.5
8
13
15°
43
13
Black
18°
41
30
55
41
43
2 4.3
6.5
18
(7)
OmrOn Scientific technOlOgieS, inc.
USA
Tel. 1/888/510-4357
canada
Tel. 1/866/986-6766
For the Latest Information
On the Internet:
www.sti.com
or
www.omron.ca
g67
D4nl
Safety interlock Switches
Dimensions and Operating characteristics (continued)
The MSP-EXP430FR5739 Experimenter Board is a development platform for the MSP430FR57xx devices. It supports the new generation of MSP430 microprocessor devices with integrated ferroelectric random acc...
Actually it's not very difficult, but I posted it in other forums for a long time but couldn't find a solution, so I thought I'd try my luck here... It's mainly a problem with the vbios in the BIOS......
It can be displayed and interrupted, but the key value cannot be read! What is the reason? It was normal before and the program has not been changed. if(!key_INT) { key=ZLG7290_GetKey(); //The value r...
I wrote a gamepad driver joystick.dll in ce. It is written in the registry like this: [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_5\Joystick] "DLL" = "Joystick.dll" I also want this ...
[color=#ff0000]The chip I use is STC89C58BD, and other chips have not been tested, please verify, [/color] /*--------------------Define buttons-----------------------------------------------*/ sbit K1...
When developing the BSP for arm926, in romInit.s, I am a little confused about the remap part:For example, before remap, after the system is powered on, the ROM address is 0 and the SDRAM address is 0...
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
AD8205 is
a single-supply high-performance differential
amplifier
launched by
Analog
Devices of the United States
. The typical single-supply voltage is 5V, and its common-mode volta...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
VP2188 is a color STN LCD module produced by Jingdian Pengyuan. This module is a dot matrix transmissive color STN display screen with a color scale of 65 k colors and white LED backlight. Its core...[Details]
OC faults may be the most frequent and the most frequent of all faults in the inverter. They alarm during the startup process, during the shutdown process, during operation, and even when powered o...[Details]
Preface
In recent years, white light LEDs have gradually replaced incandescent bulbs and fluorescent lamps because they have unparalleled advantages over traditional light sources in terms...[Details]
0 Introduction
With the rapid development of social economy and science and technology, electric locomotives, subways and electric vehicles will be widely used. The power conversion and cont...[Details]
0 Introduction
In order to improve the automation control of shortwave transmitters, so that they can automatically process from far to near, the technicians here use the ICS system to complete the ...[Details]
1 What is an LED floodlight?
LED downlights are also called spotlights, projection lamps, and spotlights. They are mainly used for architectural decorative lighting and commercial space lighti...[Details]
Every time I go home and walk up the stairs, I am always scared. The corridor lights are often broken, and no one changes the bulbs, or they are not smart enough and need to be operated manually. E...[Details]
The production process of lithium batteries does not mention the previous processes such as material preparation, winding, liquid injection, and packaging, but only talks about the final formation ...[Details]
The capacity of a battery depends on the amount of charge and discharge, in addition to some factors of the battery itself. Obviously, if the charge and discharge of the battery can be recorded all...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
