P-0505E2941BBT1

0. Preparation First use st-link to connect the stm32 core board and PC for burning St-link Stm32 3.3V 3.3V GND GND SWDIO PART SWCLK DCLK Then connect with USB serial port board to v...[Details]

Artificial Intelligence (AI) is undoubtedly the hottest topic in the technology industry in the past one or two years. In addition to the huge investments made by technology giants, financial and o...[Details]

With the large-scale development of the domestic household photovoltaic market and the improvement of component and inverter technology, the system cost has dropped significantly in the past year. The...[Details]

In 1949, after three years of civil war, the Nationalist government was defeated and retreated to Taiwan. The political and academic circles launched a large-scale reflection on why they failed in ...[Details]

Summary of STM32 peripheral DMA usage: 1. Select DAM mode according to your needs: (1) Circular mode—DMA_Mode = DMA_Mode_Circular (2) Normal mode—DMA_Mode = DMA_Mode_Normal 2. For Chanel3 of DMA1, t...[Details]

The code for using timer 0 to implement a running light in a 51 MCU is as follows. The LED light is connected to port P1. The code is annotated below, so I won't explain it in detail. My English is n...[Details]

The key is the configuration of registers. The T1 timer (16 bits) of CC2530 needs to configure three registers: T1CTL, T1STAT, IRCON Here is just a brief introduction. For more details, please refer ...[Details]

MCS-51 single-chip microcomputer timer/counter experiment programming program Programming requirements: 1. Connect a light-emitting diode LED to the P1.0 pin, light up for two seconds, turn off for o...[Details]

;The hardware connection circuit of the 51 single-chip microcomputer is as follows: ;P1.3 and P1.4 are each connected to a button; ;P0.0 and P0.3 are each connected to a light-emitting diode; ;P2.0~P...[Details]

/*************************************************************************************       *   main.c:  the main file    *   NXP --  LPC1768   *   *      *   Author  :   light                ...[Details]

#include "myuart.h" #include "avr/io.h" #include   #define UDRE   5  #define RXEN   4 #define TXEN   3 #define UCSZ0  1 #define RXC    7 #define RXCIE  7   ISR(USART0_RX_vect)//接收中断 {   unsigned char...[Details]

#include  #include  #define RXB8 1 #define TXB8 0 #define UPE #define OVR 3 #define FE 4 #define UDRE 5 #define RXC 7   #define FRAMING_ERROR (1 FE) #define PARITY_ERROR (1 UPE) #define DATA_OVERRUN ...[Details]

#include iom16v.h   #include macros.h #include "key.h" #include "1602.h" #include "delay.h" unsigned char display ={0,0,0}; //display data void main(void) {  unsigned char Key;    LCD_init();  ...[Details]

Today, the country attaches great importance to the Internet of Things, and the Internet of Everything has become the vision of all people in related industries. However, at the same time, masterin...[Details]

Mobile phone battery charger program made by STC12C2052AD microcontroller #include  stc12c2052ad.h   #include  intrins.h   #define uchar unsigned char  #define uint unsigned int sbit REF   =P1^0; sbi...[Details]