302073P5K5600CB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302073P5K5600CB

302073P5K5600CB: DescriptionFixed Resistor, Metal Foil, 0.75W, 5560ohm, 350V, 0.25% +/-Tol, -2,2ppm/Cel,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

302073P5K5600CB Overview

Fixed Resistor, Metal Foil, 0.75W, 5560ohm, 350V, 0.25% +/-Tol, -2,2ppm/Cel,

302073P5K5600CB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	850536819
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	15.88 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	0.75 W
resistance	5560 Ω
Resistor type	FIXED RESISTOR
series	H(OTHER)
technology	METAL FOIL
Temperature Coefficient	2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.25%
Operating Voltage	350 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Internal circuit diagram of STR80145

Phone call counter

CT computer room intercom circuit diagram

PWM amplifier models and waveforms

"Welcome, welcome to patronize" sound and light voice/music circuit

Computer motherboard circuit diagram 440BX_09

Memory chip expansion problem?: In the MCS-51 single-chip system, 2*8-bit memory chips are expanded to 8*16 bits (using line selection method). How to expand this? There are 16 lines in total for P0 and P2 ports. Which lines should ...; HGP965 Embedded System

Verilog HDL experiment---small project 2: [table=98%][tr][td] [font=Times New Roman][size=12pt]/*= ... [size=12pt][color=green][font=Times New Roman]PAUSE[/font][/color][color=green][font=宋体]: Pause signal[/font][/color][color=green][/color][...; qixiangyujj FPGA/CPLD

Preliminary test passed, 4.3-inch oled display-STM32 direct drive: [i=s] This post was last edited by gxkj001 on 2016-6-17 11:59 [/i] The preliminary test results of the 4.3-inch oled solution driven by STM32 are shown. If you are interested, you can discuss it.[alig...; gxkj001 stm32/stm8

"Hello, Amplifier" Questions about input bias current: Input bias current, see below, may I ask if the triangle in the figure below is the ground? ? ? ? At least it is the reference ground, right? Then where does the current come from, is it the ground? ?...; ddllxxrr ADI Reference Circuit

Is there something wrong with the interrupt in IAR FOR 8051? Why is it not executed?: #include #includeunsigned int t=0; void main() { TCON_bit.TR0=1; TMOD_bit.M00=1; TMOD_bit.M10=0; IE_bit.EA=1; IE_bit.ET0=1; TH0=0xff;//100us TL0= 0x9c; while (1) { if(t==10) { t=0; P0=0X80; P2=0X00; w...; 荖鬼 51mcu

【Play esp8266 together】Yangtze River, Yangtze River, I am the Yellow River: I received the esp8266 version of the micro python board. Thanks to the forum. I feel that the pattern on the back is more like the Great Wall.After powering on, the esp8266 flashes and stops after 15...; suoma MicroPython Open Source section

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components