Miniature Single-Sided Thick
Film Chip Resistors
The
ims
IMS series of miniature single-sided thick film chip resistors is
ideally suited for hybrid and printed circuit applications. Many combinations
of termination materials are available to meet the requirements of all
common attachment methods. Sizes from .025” X .030” to 0.150” X 0.050”
are offered. A wide range of values and tolerances is available.
Terminations
Single side termination
-1
-3
-C
Au
PtAg
PtAg with 62/36/2 solder
coating
Note: Not all termination materials available in all styles.
Resistance Ranges
The table below illustrates the resistance values and the tolerances available
for all of IMS’ single side devices. Resistance values can be
as low as
0.1Ω
and
as high as 1000 GΩ
(device dependent). For resistances higher
Ω
Ω
than 1000 GΩ, consult the factory.
000
1
H09
005
008
009
014
001
002
003
004
010
017
Features
Thick film technology
Single-Sided Terminations
for Wirebonding, Soldering,
and Epoxy Attachment
Gold, Platinum Silver, and
Platinum Silver with Solder
Coating Terminations
Resistance values from
0.1Ω to 1000 GΩ
Ω
Ω
Tolerances to ± 1 %
Low TCRs
0.1 - 0.99
50 Schoolhouse Lane
Portsmouth, RI 02871
Tel (401) 683-9700
Fax (401) 683-5571
e-mail: ims@ims-resistors.com
http://www.ims-resistors.com
5%
10%
20%
1.0 - 9.9
2%
5%
10%
20%
10 - 25M
1%
2%
5%
10%
20%
26M - 1G
5%
10%
20%
30%
40%
50%
1.1G - 9.9G 20%
30%
40%
50%
10G - 99G 30%
40%
50%
100G - 1T 40%
50%
Jumpers are available in all sizes.
1 Larger bond pads available for auto wirebonding.
Dimensions
Part Number
IMS000
IMS001
IMS002
IMS003
IMS004
IMS005
IMS008
IMS009
IMSH09
IMS010
IMS014
IMS017
Length
0.045 ± .005
0.050 ± .005
0.075 ± .005
0.100 ± .005
0.150 ± .005
0.100 ± .005
0.100 ± .005
0.080 ± .005
0.080 ± .005
0.125 ± .005
0.035 ± .005
0.025 ± .005
Width
0.030 ± .005
0.050 ± .005
0.050 ± .005
0.050 ± .005
0.050 ± .005
0.100 ± .005
0.025 ± .005
0.050 ± .005
0.050 ± .005
0.050 ± .005
0.035 ± .005
0.030 ± .005
Height
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
0.016 max.
W
H
H
T
L
L
Specifications
Part number
IMS000
IMS001
IMS002
IMS003
IMS004
IMS005
IMS008
IMS009
IMSH09
IMS010
IMS014
IMS017
Rated power (70
o
C)*
125 mW
125 mW
175 mW
250 mW
350 mW
500 mW
100 mW
175 mW
175 mW
250 mW
125 mW
30 mW
WVDC
60
60
100
160
350
160
175
150
150
230
50
40
Tolerances (%)
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
10, 20, 30
1, 2, 5, 10
1, 2, 5, 10
1, 2, 5, 10
* Increased power handling can be achieved by using proper circuit design
and power management techniques .
Ordering Information
Example: 0.045” X 0.030,” gold terminations, 100Ω, 5% tolerance
Ω
IMS000 - 1 - 1000 J
000
003
008
010
1
2
Samples
Available
From Stock
1
001
004
H09
014
2
002
005
009
017
2
Tolerance
F - 1% G - 2% J - 5%
K - 10% L - 15% M - 20%
N - 30%
Available in -0, -1, -2 only
Available in -1 only
Termination
-0
-2
-1
-3
-C
Pd/Ag (IMS000 only)
Pd/Ag w/ 62/36/2 solder (IMS000 only)
The first three digits are significant
values. The fourth is the number of
Au
zeroes following. The R indicates a
Pt/Ag
Pt/Ag w/ 62/36/2 solder
decimal point when resistance value is
Add “B” after the dash number to indicated a
backplane of the same Metalization (-1,-3 only).
Resistance value
less than 100Ω.
50 Schoolhouse Lane
Portsmouth, RI 02871
Tel (401) 683-9700
Fax (401) 683-5571
e-mail: ims@ims-resistors.com
http://www.ims-resistors.com
Bulk packaging is standard. Tape and reel and waffle packs are available
for some sizes. Please consult the factory.
IMS ver.6 03/04 Specifications subject to change without notice.
PCB Design
京公网安备 11010802033920号
EEWORLD
