[i=s]This post was last edited by junnotech on 2019-2-14 11:04[/i] [align=left][size=4]OTDR (Optical Time Domain Reflectometry) and OFDR (Optical Frequency Domain Reflectometry) are two commonly used ...
DSP is a 3.3V system. In the design, an RC circuit is usually added to the EPWM end of the DSP.
Personally, I think this circuit has two functions. One is to block high frequencies, and the other is t...
Hello students, I've been working on non-contact temperature measurement with cc430f5137 and mlx90614 recently. I've tried both software simulation IIc and hardware IIc modules, but I can't receive th...
I recently did a small test (Z-STACK2.5.1 for the protocol stack and CC2530 for the platform). It was like this: there were three devices in the network (a coordinator, four routers and a terminal). T...
Dear experts, I have a question, as follows:
module test（A,B,C）
endmodule
test t1（.A(AX),.B(BX),.C(CX)）As shown above, the test module is instantiated, but I did not give values for A, B, and C, which...
At present, the development of wireless power supply technology for electric vehicles (EVs) is becoming more and more active. In 2012, Volvo of Sweden established Volvo Technology Japan in Tokyo as...[Details]
0. Introduction
In daily life, we often see some special-purpose vehicles. When these vehicles pass through intersections, they often obtain the right of way at intersections by temporarily op...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
Automotive applications are particularly sensitive to EMI events, which are unavoidable in a noisy electrical environment consisting of a central battery, bundled wiring harnesses, various inductiv...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
In order to highlight the concept of "energy saving and environmental protection" of intelligent buildings, solar street lights are designed for intelligent communities. The inclination and capacit...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
1. Introduction
With the gradual automation and modernization of industrial control systems, fieldbus control systems have received more and more attention and application. CAN bus is currentl...[Details]
Although it is relatively easy to check the stability of a simple amplifier at lower frequencies, it may be much more difficult to evaluate the stability of a more complex circuit. This artic...[Details]
I. Introduction
Since RS232 has a short communication distance (only 15 meters according to EAT/TAI-232 standard), and can only perform point-to-point communication, it cannot directly f...[Details]
1 Introduction
The Third Steel Plant of Jigang Group is a key investment project of Jigang Group during the "15th Five-Year Plan". It has introduced first-class domestic and foreign advanced eq...[Details]
Digital array radar (DAR) uses digital beam forming (DBF) in both receiving and transmitting modes to achieve flexible distribution and reception of RF signal power in the airspace, obtain excellent t...[Details]
Test/Measurement
京公网安备 11010802033920号
EEWORLD
