Microcontrollers and analog components go hand in hand. In almost all applications, they rely on each other to complete the signal path—applications such as medical, consumer, and energy. We need anal...
There are several interrupt subroutines in my program that are triggered by the dual edges of the GPIO pins (the actual pins are not connected to peripherals and are just used as flags) Question 1: If...
For example, there are two types of multimeters, the Chinese Uni-T and the American Fluke. Although the accuracy of the Uni-T is higher than that of the Fluke (as stated in the manual), it is not as e...
01. Use LDO regulatorStandard three-terminal linear regulators typically have a dropout voltage of 2.0-3.0V. They cannot be used to reliably convert 5V to 3.3V. Low Dropout (LDO) regulators, which hav...
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
As cellular phones become more advanced, the power consumption of the system during operation and the power consumption during standby are also increasing. Therefore, the power management design of...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
Distributed Wireless Communication System (DWCS) uses distributed antennas, distributed processing control, joint signal processing and other technologies to improve the system's spectrum efficie...[Details]
This article discusses the six design steps of LED lighting system design in detail: (1) determine the lighting requirements; (2) determine the design goals and estimate the optics; (3) the efficie...[Details]
For battery-powered portable devices, in addition to breaking through the limitations of processing power, the performance of portable system power supplies also needs to be continuously improved. ...[Details]
summary
This article will briefly analyze the success and shortcomings of high-frequency DC-DC switching power supplies in the process of miniaturization (the second basic goal), and propose m...[Details]
With the popularity of digital appliances, rechargeable batteries can be seen everywhere in people's daily lives and have become one of the indispensable daily necessities.
This article gives ...[Details]
introduction
Temperature and humidity are the main environmental parameters of industrial and agricultural production. It is of great significance to measure them accurately and timely. Using a s...[Details]
Applying fieldbus technology on new beer production lines is the first choice for large beer companies with strong management level and technical strength. Guangzhou Zhujiang Beer Group Co., Ltd. i...[Details]
0 Introduction
PROFIBUS is an open digital communication system with a wide range of applications, which has been included in the international standards IEC 61158 and IEC 61784. Since the gen...[Details]
The Challenge:
Improving Siemens Wind
Turbine Controls
System software automated testing for regular releases, validating wind turbine control system components during the developme...[Details]
When designing a PLC system, the control scheme should be determined first, and the next step is to select the PLC engineering design. The characteristics of the process and the application require...[Details]
The situation of "excessive neutral current" mentioned here means that when the three-phase load is balanced, the neutral current is still too large, and the neutral current is more than 1.5 times ...[Details]
The Challenge:
Created to monitor the pulp production process in large paper mills to save energy and reduce costs.
The Solution:
To increase throughput, save energy, and op...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
