381LR121M400H032D datasheet, PDF

Datasheet> All Categories > Passive components> capacitor> 381LR121M400H032D

381LR121M400H032D: DescriptionAluminum Electrolytic Capacitor, Polarized, Aluminum, 400V, 20% +Tol, 20% -Tol, 120uF,; CategoryPassive components capacitor; File Size132KB，5 Pages; ManufacturerCDE [ CORNELL DUBILIER ELECTRONICS ]; Environmental Compliance

Download Datasheet Parametric View All

381LR121M400H032D Overview

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 400V, 20% +Tol, 20% -Tol, 120uF,

381LR121M400H032D Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	844110551
package instruction	,
Reach Compliance Code	compliant
ECCN code	EAR99
YTEOL	6.98
capacitance	120 µF
Capacitor type	ALUMINUM ELECTROLYTIC CAPACITOR
diameter	22 mm
dielectric materials	ALUMINUM (WET)
ESR	497 mΩ
length	35 mm
negative tolerance	20%
Number of terminals	2
Maximum operating temperature	105 °C
Minimum operating temperature	-25 °C
Package form	Snap-in
polarity	POLARIZED
positive tolerance	20%
Rated (DC) voltage (URdc)	400 V
ripple current	1460 mA
Terminal pitch	10 mm

Preview

Download Datasheet

View All

Type 381LR 105 °C Highest Ripple, Snap-In Aluminum

Ultra-High Ripple Capabilities

Compared to standard 105 °C snap-ins like the Type 381L/LX

Type 381LR can handle an extra 25% ripple current or more.

This remarkable capability stems from advances in electrolyte

that give extremely low ESR values.In high ripple current

applications like motor drives you can save by using fewer

capacitors.

Highlights

- The right choice for motor drive bus capacitors

- The right choice for UPS bus capacitors

- Compare to Type 381L

- Up to 2 times the ripple current

Specifications

Temperature Range

Rated Voltage Range

Capacitance Range

Capacitance Tolerance

Leakage Current

Ripple Current Multipliers

–40 °C to + 105 °C ≤ 315 Vdc

–25 °C to + 105 °C ≥ 350 Vdc

200 Vdc to 450 Vdc

56 µF to 2,200 µF

± 20%

≤3 √CV µA, 4 mA max, 5 minutes

Ambient Temperature

45 ºC

2.35

Frequency

50 Hz 60 Hz 120 Hz 500 kHz 1 kHz kHz &

0.75

Low Temperature Characteristics

Endurance Life Test

0.80

1.00

1.20

1.25

1.40

60 ºC

2.20

70 ºC

2.00

85 ºC

1.70

105 ºC

1.00

Impedance ratio: Z

–20⁰C

∕ Z

+25⁰C

≤ 3 (200–450Vdc)

3000 h at full load at 105 °C

∆ Capacitance ±20%

ESR 200% of limit

DCL 100% of limit

1000 h at 105 °C

∆ Capacitance ±20%

ESR 200% of limit

DCL 100% of limit

10 to 55 Hz, 0.06” and 10 g max, 2 h each plane

RoHS Compliant

Shelf Life Test

Vibration

CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

Notice and Disclaimer:

All product drawings, descriptions, specifications, statements, information and

data (collectively, the “Information”) in this datasheet or other publication are subject to change. The

customer is responsible for checking, confirming and verifying the extent to which the Information con-

tained in this datasheet or other publication is applicable to an order at the time the order is placed. All

Information given herein is believed to be accurate and reliable, but it is presented without any guaran-

tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability

for certain applications are based on the knowledge that the Cornell Dubilier company providing such

statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards

as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-

tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,

warranty or representation concerning the suitability for a specific customer application, use, storage,

transportation, or operating environment. The Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference

to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),

and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although

Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design

and manufacturing of its products, in light of the current state of the art, isolated component failures may

still occur. Accordingly, customer applications which require a high degree of reliability or safety should

employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies

or other appropriate protective measures) in order to ensure that the failure of an electrical component

does not result in a risk of personal injury or property damage. Although all product-related warnings,

cautions and notes must be observed, the customer should not assume that all safety measures are indi-

cated in such warnings, cautions and notes, or that other safety measures may not be required.

Recommended Resources

The single-phase energy meter is directly connected to the circuit b

Continuous casting machine motor speed regulation trigger circuit

Quartz clock light-controlled timekeeping circuit

Automatic number checker backup power supply circuit diagram

DC servo system circuit composed of transistors

Fast sample and hold circuit diagram

If you close the software after playing a video above 320*240, the system will crash. 176*144 but not!!!: I am currently playing a video of 320*240 or above under wince5.0 and then closing the software. The system will crash, but not 176*144! I now change the video content and only display a picture. I st...; kenli Embedded System

Reference voltage problem of 64-pin stm32AD: I have seen that the 64-pin STM32 does not have a reference voltage input terminal. What should I do if I need a more accurate reference voltage? If I use a high-precision power supply to power the an...; icai stm32/stm8

Error in compiling printf redefinition in CCS: I use printf in CCS to send the voltage sampled by ADC to the serial port. I want to use the method of redefining putchar, but the compilation fails. How can I solve it?...; luuuuu MCU

Moderator please help, I can't post a new thread, why?: I have posted two summary articles after registering. When I posted, I was prompted "Because the content contains links, it needs to be reviewed", but I failed to post successfully both times. I don't...; renton Microcontroller MCU

PDA power supply solution help: Now I want to make a PDA, and I want to use a lithium battery to power 3.7V or 4.2V. Now I have to step down the voltage to power the ARM (3.3V/1.3V), the peripherals 3.8V/5V, etc. By the way, do I ne...; syq8585 Embedded System

How to change the minimum spacing in the rules for the following parts: As shown in the picture, how to change the minimum spacing setting of parts in AD10...; Ashley_Zhai PCB Design

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components