When designing a CPU using FPGA, the current state of the state machine consists of 8 clock cycles. Each clock cycle must complete a fixed operation. The second clock and the sixth clock are no operat...
[color=#252525][size=14px]I need help, Freescale MC9S12XEP100 has two CAN bus interfaces. Are these two interfaces one input and one output? Or one high speed and one low speed? Or are they defined by...
Using UCOS, it is found that the newly created task enters HardFault_Handler after running. It is very likely that the allocated stack is too small (simply put, the memory allocated to the task is too...
This post collects some winning works of the 2012 competition, all of which can be downloaded directly without points. [/size] [size=4] [/size] [size=4][list] [*][url=https://download.eeworld.com.cn/s...
stm32 runs ucos-ii 2.86, with external sram, the driver works fine, but in the scatter-loading file, as long as I want to use the external sram, the program will freeze and cannot run. Has anyone enco...
With the rapid development of science and technology, especially the widespread application of digital technology and various ultra-large-scale integrated circuits, electronic equipment, especially...[Details]
1. Overview
Will passive devices
produce nonlinear intermodulation distortion? The answer is yes! Although there is no systematic theoretical analysis, it has been found in engineerin...[Details]
introduction
MAX6636 is a multi-channel precision temperature monitor that can not only monitor local temperature, but also connect up to 6 diodes externally. Each channel has a programmable...[Details]
The power consumption of a switching power supply includes fixed losses caused by parasitic resistances such as semiconductor switches, magnetic components, and wiring, as well as switching losses ...[Details]
1. Introduction
AS-Interface bus technology is an intelligent network that uses a single cable to connect sensors and actuators to controllers, transmit data, and provide power. It can be used...[Details]
UDN2916LB is a two-phase stepper motor bipolar driver integrated circuit launched by SANKEN. It can drive dual-winding bipolar stepper motors and is particularly suitable for controlling dual-step ...[Details]
Stepper motors, also called steppers, use the principles of electromagnetism to convert electrical energy into mechanical energy and have been used since the 1920s. With the increasing popularity o...[Details]
1 Causes of problems with electric vehicle batteries
1.1 Caused by the battery itself
Why do we say that? In the previous issue, we learned about the working princi...[Details]
Lithium iron phosphate batteries are used as lithium-ion secondary batteries. Their main application is now in power batteries, which have great advantages over NI-H and Ni-Cd batteries.
Lithi...[Details]
With the continuous development of integrated circuit technology, integrated circuits have developed from thousands of gates to the current level of millions and tens of millions of gates. The applica...[Details]
According to a survey by the International Energy Agency, Asia and Australia used 1.65 trillion liters of oil for energy in 2004. The survey also showed that since 1990, the demand for oil has been...[Details]
In recent years, information technology based on microelectronics and computer technology has developed rapidly, and ultrasonic non-destructive testing instruments have also gained unpreceden...[Details]
1 Introduction
The automobile drum test bench (also known as chassis dynamometer) is a large-scale indoor automobile test equipment and a bench test system for completing automobile whole vehi...[Details]
1. Architecture and operation of electronic toll collection system
The basic principle of the electronic toll collection system is to enable a special device (on-board unit) installed on t...[Details]
High-frequency electrodeless lamp is a high-tech product that integrates electronic technology, vacuum science, power electricity, plasma science, magnetic material science and other disciplines. Elec...[Details]