3M
™
PC Card Header
Single Slot, Low Profile, Integrated Ejector
•
•
•
•
•
MCH Series
Meets PCMCIA specifications
Tapered header pins provide easy insertion
High temperature plastic insulator
Left or right ejector options
Solder retention clips and plastic pegs for secure
hold-down
• See Regulatory Information Appendix (RIA) for
chemical compliance information
ED
Date Modified:
August 8, 2008
TS-1110-D
Sheet 1 of 3
Physical
Insulation Material:
Insulation Flammability:
Insulation Color:
Contact Material:
Plating Wiping Area:
Plating Solder Tails:
Mechanical:
Insulation Resistance:
> 5
×
10
9
Ω
at 500 V
DC
Withstanding Voltage:
500 V
RMS
for 1 Minute
Environmental
Temperature Rating:
Operating Environment:
-20°C to +60°C
,
95% RH Non-condensing
Process Temperature:
260°C (per J-STD-020C)
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
D
Electrical
Current Rating:
0.5 A
IS
Durability-Office Environment: 10,000 cycles minimum
Insertion Force: 8.8 lbs. ( 39.2 N ) maximum
Extraction Force: 1.5 lbs. ( 6.67 N ) minimum and 8.8 lbs. ( 39.2 N ) maximum
C
O
LCP
UL 94V-0
Black
Copper Alloy
Gold flash over 27
μ″
[ 0.68
μm
] PdNi
100
μ″
[ 2.54
μm
] Tin/Lead or Reflowed Tin (See Ordering Information)
N
TI
N
U
3M
™
PC Card Header
Single Slot, Low Profile, Integrated Ejector
Left Ejector Option
2.480
63.00
A
.118
3.00
MCH Series
A
3.295
83.70
2.512
63.80
.213
5.40
N
U
.519
13.18
.350
8.89
STROKE
1.204
30.58
ED
STANDOFF
HEIGHT
.433
11.00
PIN 1
PIN 2
O
N
.139
3.53
TI
PIN 35
D
IS
C
PIN 34
.236
6.00
PIN 36 PIN 68
.050
1.27
1.650
41.92
2.134
54.20
2.319
58.90
.135
3.42
Ordering Information
MCH - 068TAX - 03 LPK X - XX
Ejector Option
L1 = Left ejector, oval button
R1 = Right ejector, oval button
Keying
Blank = 5.0 volt
3 = 3.3 volt
Plating Suffix:
TR30 = PdNi w/ Au flash and Sn-Pb solder tails (RIA E3 & C2 apply)
LL = PdNi w/ Au flash and Sn solder tails (RIA E1 & C1 apply)
TS-1110-C
Sheet 2 of 3
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
PC Card Header
Single Slot, Low Profile, Integrated Ejector
.12 ±.25
3.00 ±6.35
MCH Series
R .030
0.76
.165 ±.10
4.20 ±2.54
.198 ±.100
5.03 ±2.54
.386
9.80
SECTION A-A
Part Description
MCH-068TAX03LPXX-XX
Stand-off Height
.276 [ 7.00 ]
PCB Board to
Centerl Line
.382 [ 9.70 ]
ED
-A-
Total Component
Height
.500 [ 12.70 ]
TI
N
1.650
41.91
PIN 1
2.480
63.00
N
U
2.018
51.26
PIN 33
PIN 34
.075
1.91
.075
1.91
PIN 67
PIN 68
.075
1.91
2X
O
.087 ±.002
2.21 ±0.05
UNPLATED
l O
.002 [0.05] A
M
B
2.320
58.93
2.491
63.26
PIN 2
.240
6.10
-B-
C
PIN 35
.240
6.1
O
PIN 36
.050
1.27
68X
O
.039 ±.002
0.99 ±0.05
PLATED THRU HOLE
l O
.002 [0.05] A
M
B
STANDOFF FOOTPRINT
NO COMPONENTS
2X
O
.087 ±.002
2.21 ±0.05
PLATED THRU HOLE
l O
.002 [0.05] A
M
B
D
IS
2.540
64.52
.170
4.32
.355
9.02
.114
2.90
RECOMMENDED MOUNTING HOLE LAYOUT
SHOWN ON CONNECTOR SIDE OF BOARD
TS-1110-C
Sheet 3 of 3
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-c
D
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
IS
C
Appendix E3: European Union RoHS
O
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
N
TI
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
N
U
ED
Appendix E2: European Union RoHS
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part
does not
contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
D
IS
C
O
N
TI
N
U
ED
RIA-2217A-c