• Glass sealed package assures high reliability and high temperature operation
• Tight tolerance and stability available
• Suitable for RoHS compliant re ow
• Low cost glass sealed crystal solution
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
Moisture Sensitivity Level (MSL) –This product is Hermetically Sealed and not Moisture Sensitive -MSL = N/A: Not Applicable
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
• Microprocessor crystals
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
8.000
8.000
Operation mode
40.001
40.001
Operating Temperature
Storage Temperature
Frequency Tolerance@ +25°C
Frequency Stability over the Operating
Temperatu ( ref. to +25°C)
re
Equivalent series resistance
-10
-40
-50
-50
-----
-----
-----
-----
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging @ 25°C±3°C
Insulation Resistance
-----
-----
-----
-----
500
Typical
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
18
10
-----
-----
Maximum
100.000
40.000
100.000
60.000
+60
+85
+50
+50
ºC
ºC
ppm
ppm
MHz
Units
Notes
Fundamental
Fundamental AT-
cut (Standard)
3
rd
OT AT -cut
(Standard)
Fundamental AT-
cut (See options)
See options
See options
See options
8.000 – 10.000MHz
(Fundamental)
10.001 – 15.999MHz
(Fundamental)
16.000 – 60.000MHz
(Fundamental)
40.000 – 100.000MHz
(3
rd
OT)
100
60
50
70
7
-----
100
±5
-----
pF
pF
µW
ppm
MΩ
Ω
-----
See options
First year
@ 100Vdc
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
ABM 2-
Frequency in MHz
e.g. 8.000MHz
14.31818MHz
26.000MHz
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
MHz -
-
-
-
-
Packaging
Blank: Bulk
T : 1k reel
T2 : 250pcs/reel
Mode
F: Fund AT for >40MHz
Load Capacitance (pF)
Please specify CL in pF
(8 to 33pF) or S for series
Please contact ABRACON for
other values
Custom ESR if other
than standard
R
: Specify a value in Ω
(e.g.: R4 0)
Operating Temp.
(See Table 1 for details)
E : 0°C ~ + 70°C
B : -20°C ~ +70°C
C: -30°C ~ + 70°C
N: -30°C ~ + 85°C
D: -40°C ~ +85°C
Freq. Tolerance
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
(See Table 1 for details)
U: ±10 ppm
G: ±15 ppm
X : ±20 ppm
W: ±25 ppm
Y : ±30 ppm
H: ±35 ppm
A : ±80 ppm
Q: ±100 ppm
V : ±120 ppm
P: ±150 ppm
Note: See Table 1 for the availability of Operating Temp. and Freq. Stability combination
Table 1 Available Combinations of Operating Temp. and Freq. Stability
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
U:±10ppm
√
G:±15ppm
√
√
√
X:±20ppm
√
√
√
W:±25ppm
√
√
√
√
Y:±30ppm
√
√
√
√
√
√*
H:±35ppm
√
√
√
√
√
√*
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
Std:±50ppm
√
√
√
√
√
√*
A:±80ppm
√
√
√
√
√
√
Q:±100ppm
√
√
√
√
√
√
V:±120ppm
√
√
√
√
√
√
P:±150ppm
√
√
√
√
√
√
Note: *: Availability depends on frequency.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
LLC
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OUTLINE DIMENSION:
0.062±.019
(1.6 ±0.20)
Note: Due to the availability of raw materials, the chamfer may not appear on the both pads. Be advised that this does
not affect the electrical characteristics of the crystal in any way.
Dimensions: inches (mm)
REFLOW PROFILE:
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
TAPE & REEL:
T: 1000pcs/reel
T2: 250pcs/reel
Dimensions: mm
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Today, when I was learning the GPIO setting program, I had some questions about this line of program: GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;.This instruction is to set the output rate of GP...
In daily circuit design, the battery power in the circuit often greatly affects the debugging results. For example: 1. Wind tunnel debuggingBecause I didn't care about the battery voltage at the begin...
Can AD drag components like PADS, where the components stick to the cursor after clicking, and the components will be placed only after clicking again?
I am used to using PADS, but I have to learn AD ...
At present, the development of wireless power supply technology for electric vehicles (EVs) is becoming more and more active. In 2012, Volvo of Sweden established Volvo Technology Japan in Tokyo as...[Details]
Automotive applications are particularly sensitive to EMI events, which are unavoidable in a noisy electrical environment consisting of a central battery, bundled wiring harnesses, various inductiv...[Details]
In this article, the high-performance DSP developed by TI can be used as an effective confidentiality method if it is applied to PC encryption cards.
As an effective network security solution,...[Details]
In order to highlight the concept of "energy saving and environmental protection" of intelligent buildings, solar street lights are designed for intelligent communities. The inclination and capacit...[Details]
Although it is relatively easy to check the stability of a simple amplifier at lower frequencies, it may be much more difficult to evaluate the stability of a more complex circuit. This artic...[Details]
Contact resistance
is the resistance to current flow through a closed pair of contacts. This type of measurement is performed on devices such as connectors,
relays
, and switches. The...[Details]
1 Introduction to HART Protocol
HART (Highway Addressable Remote Transducer), an open communication protocol for addressable remote sensor high-speed channels, was launched by Rosemen in the U...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
FPGAs are used in 81% of electronic systems, including many commercial and defense products, and most FPGAs use BGA packaging. The BGA packaging is characterized by small solder balls and small sol...[Details]
Introduction
In industrial control, speed measurement is often required. Generally, a contact tachometer is used. This tachometer must be placed against the center of the shaft to measure. It...[Details]
1 Introduction
Ultrasound refers to elastic vibration with a frequency higher than the audible frequency limit (i.e., in the frequency band above 20 kHz). The propagation process of this vib...[Details]
Our flight had just begun to descend when a gentleman sitting next to me turned to talk to me about engineering—he had seen me reading an engineering journal. The gentleman next to me said that he ...[Details]
This article discusses the six design steps of LED lighting system design in detail: (1) determine the lighting requirements; (2) determine the design goals and estimate the optics; (3) the efficie...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
