MC0
Metallized Polycarbonate Wrap & Fill Tubular
SERIES
Metallized
Polycarbonate
The MC0 Series is
designed for low-drift, tight tolerance
applications that require voltage to 400VDC, a continuous operating
temperature to 125°C and capacitance tolerance as low as 1%. There is also a
of ±100ppm and a dissipation factor <0.3%.
temperature
FEATURES
-
1% Capacitor Tolerance
-
Dual Moisture Seal
Construction
-
Superior Protection Against
Hostile Environments
-
Manufactured to MIL
Standards
STANDARD CONFIGURATION
-
Wrap & Fill Tubular
Rev. 2
Speci cation Summary
Capacitance Range
0.0010µF to 20.0µF Capacitance shall be measured at 25°C
and at or referred to a frequency of 1 kHz.
Capacitance Tolerance
Standard tolerance is ±1%, ±2%, ±5%, ±10%
Operating Temperature Range
-55°C to +125°C
Enclosure/ Construction
Extended metallized Polycarbonate
lm (non-inductive)
Quality Control
Capacitors are tested 100% for:
o Capacitance
o Tolerance
o Dissipation Factor
o Dielectric withstanding Voltage
o Insulation Resistance
o Equivalent Series Resistance (ESR)
Process and inspection data are maintained on le and available
on special request.
Environmental
Parameter
Vibration
Immersion
Shock
Humidity
Thermal Shock
Life
Method
204
104
213
106
107
108
Condition
D
B
I
-
A
F
Voltage Rating
DC working voltage ratings at +125°C, are 50VDC, 100VDC,
200VDC and 400VDC.
Reference MIL-STD-202
Characteristics
Insulation Resistance
Temperature(°C)
25
Megaohmsx
50,000
Microfarads
85
5,000
125
500
Capacitance Change
Temperature(°C)
-55
PercentageChange
-2.5
(typical)
25
0
85
±1.0
125
±2.0
Insulation Resistance
CapacitanceChange
Dissipation Factor
When measured at 1kHz, the dissipation factor shall not exceed
0.3% from +25°C to +125°C.
Dielectric Strength
Capacitors shall withstand a DC potential of 200% rated
voltage for two (2) minutes without damage or
breakdown. Test voltage must be applied and
discharged through a resistance of 1 OHM per volt,
minimum and at 25°C.
Rev. 2
ADDITIONAL
INFORMATION
The MC0 Series is a new polycarbonate,
capacitor developed by Electronic Concepts to meet the
ever changing, more demanding requirements of circuit designers. Although not called for, it is built to
MIL-PRF-55514 to maximize reliability. The MC0 Series is
designed for low-drift, tight
tolerance applications that require voltage to 400VDC, a continuous operating temperature to 125°C and
of ±100ppm and a
capacitance tolerance as low as 1%. There is also a temperature
dissipation factor <0.3%. Importantly, the MC0 Series features a unique dual moisture seal construction
(versus the single seal method of others). Dual sealing ensures greater overall electrical integrity with
long term stability - and imparts the ability to accommodate adverse environments normally associated
with the electronic industry.
With the introduction of the MC0 Series, the designer can now build in more performance with
greater reliability and operating protection. Plus overall system cost savings can often be realized.
HOW TO ORDER
TYPE
Metallized Polycarbonate
MC0
2J
106
K
STYLE
B=50VDC, D=100VDC, F=200VDC, J=400VDC
The
two digits are
(e.g. 475=4,700,000pF)
/ VOLTAGE
CAPACITANCE
TOLERANCE
IN PICOFARADS
the third represents the number of zeros
K=±10% J=5% G 2% F=1%
Marking and Date Code
All capacitors are marked with company initials "EC", corporate logo or EC trademark—in addition to type MC0, capacitance,
two digits of the date code represent the year, the second two digits the
tolerance, rated DC working voltage and date code. The
week, i.e., 0952 is the 52nd week of 2009, 0902 is the second week of 2009.
Quality Assurance
Major emphasis is placed on quality assurance. EC is an ISO 9001-2000 and AS9100:2004
Company. Raw material
inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the
EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology,
compact capacitor designs and establishing reliability procedures.
Sales
United States
Eastern:
*Headquarters*
P.O. Box 1278
Eatontown,NJ 07724
Tel: 732-542-7880
Fax: 732-542-0524
Central:
Illinois 630-668-8747
email: sales@ecicaps.com
website:www.ecicaps.com
Europe
Ireland
Electronic ConceptsEurope LTD
IDA Estate, Oughterad
Co. Galway, Ireland
tel: +353-91-552385,552432
fax: +353-91-552387
email: sales@ecicaps.ie
website:www.electronicconcepts.ie
Rev. 2
MCU
京公网安备 11010802033920号
EEWORLD
