Z205T24K600VB datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> The resistor> Z205T24K600VB

Z205T24K600VB: DescriptionFixed Resistor, Metal Foil, 1.5W, 24600ohm, 350V, 0.005% +/-Tol, -.2,.2ppm/Cel, 8216; CategoryPassive components The resistor; File Size2MB，8 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Z205T24K600VB Overview

Fixed Resistor, Metal Foil, 1.5W, 24600ohm, 350V, 0.005% +/-Tol, -.2,.2ppm/Cel, 8216

Z205T24K600VB Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Objectid	1179004609
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Rectangular
Lead diameter	0.64 mm
Lead length	25.4 mm
lead spacing	16.51 mm
Manufacturer's serial number	Z205
Number of terminals	2
Maximum operating temperature	175 °C
Minimum operating temperature	-55 °C
Package height	10.49 mm
Package length	20.83 mm
Package shape	RECTANGULAR PACKAGE
Package form	Radial
Package width	4.06 mm
method of packing	Bulk
Rated power dissipation(P)	1.5 W
resistance	24600 Ω
Resistor type	FIXED RESISTOR
series	Z205
size code	8216
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Tolerance	0.005%
Operating Voltage	350 V

Preview

Download Datasheet

View All

Z Series (Z-Foil)

Vishay Foil Resistors

Ultra High Precision Z-Foil Though-Hole Resistor

with TCR of ± 0.05 ppm/°C, Tolerance of ± 0.005 % (50 ppm),

Load Life Stability of ± 0.005 %

FEATURES



Temperature coefficient of resistance (TCR):

- ± 0.05 ppm/°C nominal (0 °C to + 60 °C)

- ± 0.2 ppm/°C nominal (- 55 °C to + 125 °C,

+ 25 °C ref.) (see table 1)



Rated power: to 1 W at + 125 °C (see table 2)



Resistance tolerance: to ± 0.005 % (50 ppm)



Load life stability: ± 0.005 % at 70 °C, 2000 h or ±0.015%

at 70°C,10000 h (see table 4)



Resistance range: 5

to

600 k



Vishay Foil Resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)



Total accumulated change in resistance over life (EOL)

or Total Error Budget < 0.1 % (or better with PMO)**



Electrostatic discharge up to 25 000 V



Non-inductive, non-capacitive design



Rise time: 1 ns effectively no ringing



Current noise:

≤

0.010 µV

RMS

/V of applied voltage (< - 40

dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Low inductance: < 0.08 µH typical



Thermal stabilization time < 1 s (to reach within 10 ppm of

steady state value)



Pattern design minimizing hot spots



Terminal finish: lead (Pb)-free or tin/lead alloy



Matched sets are available per request



(TCR tracking: to 0.5 ppm/°C)



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

INTRODUCTION

The Bulk Metal

Foil resistor is based on a special

thermo-metalic stress concept wherein a proprietary bulk

metal cold rolled foil is cemented to a ceramic substrate. It is

then photoetched into a resistive pattern. Then it is laser

adjusted to any desired value and tolerance. Because the

metals used are not drawn, wound or mistreated in any way

during manufacturing process, the Bulk Metal Foil resistor

maintains all its design, physical and electrical

characteristics while winding of wire or sputtering does not.

Z foil resistors achieve maximum stability and near-zero

TCR. These performance characteristics are built-in for

every unit, and do not rely on screening or other artificial

means for uniform performance.

The stability of a resistor depends primarily on its history of

exposures to temperature. Stability is affected by:

1. Reversible changes in the ambient temperature and heat

from adjacent components (defined by the Temperature

Coefficient of Resistance, or TCR)

2. Short-term steady-state self-heating (defined by Power

TCR or PCR)

3. Irreversible destabilizing shock of suddenly-applied

power

4. Long-term exposure to applied power (load-life stability)

5. Repetitive stresses from being switched on and off

In very high-precision resistors, these effects must be taken

into account to achieve high stability with changes in load

(Joule Effect) and ambient temperature.

Vishay Foil Resistors’ new Z-Foil technology provides an

order of magnitude reduction in the Bulk Metal Foil

element’s sensitivity to temperature changes - both external

and internal. This technology provides TCR of

± 0.05 ppm/°C nominal (instrument range: 0 °C to +60 °C),

± 0.2 ppm/°C nominal (military range: - 55 °C to + 125 °C,

+ 25 °C ref), and a PCR of 5 ppm at rated power.

In order to take full advantage of this TCR improvement, it is

necessary to take into account the differences in the

resistor’s response to each of the above-mentioned effects.

The Z series has been developed to successfully deal with

these factors.

TABLE 1 - NOMINAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

VALUE

100



to 600 K



to < 100



to < 80



to < 50



to < 25



to < 10



STANDARD

TOLERANCE

± 0.005 %

± 0.01 %

± 0.02 %

± 0.05 %

NOMINAL TCR AND

MAX. SPREAD

(ppm/°C)

± 0.2 ± 0.6

± 0.2 ± 0.8

± 0.2 ± 1.0

± 0.2 ± 1.3

± 0.2 ± 1.6

± 0.2 ± 2.3

* Pb containing terminations are not RoHS compliant, exemptions may apply

** See PMO page 5

Document Number: 63187

Revision: 22-Oct-13

For any questions, contact:

foil@vishaypg.com

www.vishayfoilresistors.com

Recommended Resources

Application principle of uPC1237H

STK4151 II power amplifier circuit diagram

Power supply circuit diagram of AST-TE1498 multi-frequency color display

Use two double switches to control one light in two places

electric fence circuit

Galin HC-12 hot and cold water dispenser circuit diagram

The waveform of the PCF8591 DA output voltage is seriously distorted: I bought a PCF8591 module on Taobao for DA conversion. I wrote a DA program according to the reference materials. I hope the DA port can output a sawtooth wave with a change of 0~~5V. The controller I...; keleisibo NXP MCU

LPC2138 UART1 cannot be initialized: int8 UART1_Init(uint32 baud,uint8 datab,uint8 stopb,uint8 parity) { uint32 tmp; PINSEL0 = (PINSEL0 & (~0x0F0000)) | 0x050000; // (Clear first, then assign values) P0.8, .P0.9 // PINSEL2 = (PINSEL2 & (...; 关泰 Embedded System

What is the relationship between STM32 and IoT?: Speaking of STM32, people in the industry should know that this is a series of microcontrollers with super cost-effectiveness. It is extremely powerful, with excellent performance in power consumption...; cdhqyj stm32/stm8

How to make aluminum conductors contact firmly: During the holiday, I saw a friend repairing the electrical wires at his rental house. The electrical wires in this old house built 30 years ago were actually made of aluminum wires. The joints were s...; dfwisdom Talking

Use of _EINT, _BIS_SR, and _NOP in MSP430: I started learning MSP430 using IAR5.4 and wrote my first program according to the examples in the reference book. As follows: #include "io430.h" void main( void ) { // Stop watchdog timer to prevent ...; qinkaiabc Microcontroller MCU

What are some useful ZIGBEE modules? Simple ones (not CC2430): What are some useful ZIGBEE modules? Simple ones (not CC2430)...; sgch Embedded System

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components