ZC0204 Color code marking is applied according to IEC 60062 in four bands (E24 series) for 5 % tolerance, or in five bands (E96 or E192 series). Each
color band appears as a single solid line, voids are permissible if at least
2/3
of the band is visible from each radial angle of view. The last color band for
tolerance is approximately 50 % wider than the other bands.
ZC0207 Color code marking is applied according to IEC 60062 in four (E24 series) or six bands (E96 series). Each color band appears as a single solid line,
voids are permissible if at least
2/3
of the band is visible from each radial angle of view. The last color band represents the TCR for resistors with TCR
50
ppm/K and nominal tolerance
1
%.
Zero ohm jumper are marked with one centered black band.
PERFORMANCE GRAPH’S
Resistance value [Ω]
Resistance value [Ω]
Revision 201601
VITROHM PORTUGUESA, Lda. – Est. Nacional 249-4, Trajouce – 2765-653 S. Domingos de Rana – PORTUGAL
The color of the body coating is light green for jumpers and for a temperature coefficient of ± 50 ppm/K or ± 100 ppm/K, pink for ± 25 ppm/K, or violet for ± 15 ppm/K.
•
Zero ohm jumper are marked with one centered black band.
PACKAGING – Blister tape
Type
A
0
B
0
F
W
D
1
T
2
ZC0204
1,55
±0,1
3,7
±0,1
3,5
±0,05
8,0
-0,1
+0 3
1,0
≤1,8
ZC0207
2,40
±0,1
6,0
±0.1
5,5
±0,05
12,0
±0,3
1,5
≤2,7
Type
ZC0204
ZC0207
W
1
[+1,5]
W
2
[max]
8,4
12,4
14,4
18,4
Packaging
[dimensions]
Ø
180mm/7”
Ø
330mm/13”
Ø
180mm/7”
Ø
330mm/13”
Quantity
[pcs]
3000
10000
1500
7500
ORDERING EXAMPLE
ZC0204
0-0hm = ZC0204
Type
B
C
D
F
J
0
F
F
Tolerance
± 0,1 [%]
±
0,25 [%]
±
0,5 [%]
±
1 [%]
±
5 [%]
Jumper
K
K
Blister tape reel
C
D
E
F
0
E
E
TC
± 15 [ppm]
±
25
[ppm]
±
50
[ppm]
±
100
[ppm]
Jumper
07
07
reel diameter
1K
0R
R-Value
Revision 201601
VITROHM PORTUGUESA, Lda. – Est. Nacional 249-4, Trajouce – 2765-653 S. Domingos de Rana – PORTUGAL
[p=24, 2, left][color=rgb(62, 62, 62)][font=Tahoma, Arial, sans-serif]There has been a great deal of emphasis on increasing the capacity of [color=#3e3e3e]lithium-ion batteries[/color] in order to ach...
[b]Since STM32 is so famous, you have to take a look at STM32 Primer[/b] [color=#ff0000]No.: 1475040 Type: Novice question Author:[/color][url=http://www.daxia.com/bibis/moreinfo.asp?id=90517]geyin[/u...
Our company has more than 100 people and we want to replace the traditional telephone system we are currently using with an IP one. We have done a lot of research and found that Cisco and Avaya produc...
[size=5] At this time last year, the first semester of my freshman year had just ended. At that time, I felt unwilling and regretful for my mediocrity and many regrets. I thought that I could make som...
[i=s]This post was last edited by btty038 on 2019-10-9 13:34[/i]Overview of 5G System Standard Development5G system core capability indicatorsKey wireless technologies for 5G systemsNew network archit...
The TIA Portal software's shift instructions shift the contents of an accumulator bit by bit to the left or right. The number of bits shifted is determined by N. A left shift of N bits multiplies t...[Details]
The most significant feature of IPS panels is that both electrodes are located on the same surface, unlike other LCD panels, which have electrodes arranged on top and bottom surfaces in a three-dim...[Details]
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
On August 25th, Apple's expansion in India encountered new troubles. According to Bloomberg, Foxconn Technology Group has recalled approximately 300 Chinese engineers from India, further hindering ...[Details]
According to foreign media reports, secondary battery materials company POSCO Future M announced that it has successfully developed two experimental (prototype) positive electrode materials for the...[Details]
This paper proposes a temperature real-time transmission and display solution based on LED optical data transmission, with Jingwei Yager low-power FPGA HR (Yellow River) series as the main controll...[Details]
Reflow soldering is one of the most commonly used methods in electronics manufacturing, allowing for the soldering of large numbers of components in a relatively short time. However, any experience...[Details]
Chinese characters are extensive and profound, and there are many different names for ESD tubes. How many of them do you know?
As far as I know, ESD diodes are currently known as ESD p...[Details]
The difference between a series inverter and a parallel inverter is that they use different oscillation circuits. A series inverter connects L, R, and C in series, while a parallel inverter connect...[Details]
Batteries, at the core of new energy vehicles, are crucial to vehicle performance and range. Existing automotive batteries are categorized into lead-acid and lithium batteries. Currently, new energ...[Details]
Tires are a very important component for cars. They are related to the driving experience of the vehicle. We are almost inseparable from cars in our daily lives. For tires, according to the role of...[Details]
Wearable technology is taking off, with applications evolving rapidly, from smartwatches to fitness trackers and even smart wigs! Bluetooth Smart is at the center of this revolution. This is the se...[Details]
"I want to ask why there are so many manufacturers making mobile phone CPUs, but only Intel and AMD make computer CPUs?"
The progress of domestic PC CPU production has disappointed many ...[Details]
1. Introduction
In 2015, Apple's new MacBook and Apple Watch both featured force-sensing technology, which Apple calls Force Touch. Each time a user presses the touchpad, the device not only p...[Details]
On August 20, Huawei Device announced that the all-new M7 is the first to feature an in-cabin laser vision solution. This solution offers enhanced active safety capabilities compared to primary vis...[Details]