BU-61588P3-491 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-61588P3-491

BU-61588P3-491: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CPGA81, 1 X 1 INCH, 0.150 INCH HEIGHT, CERAMIC, PGA-81; CategoryThe embedded processor and controller Microcontrollers and processors; File Size1MB，15 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-61588P3-491 Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CPGA81, 1 X 1 INCH, 0.150 INCH HEIGHT, CERAMIC, PGA-81

BU-61588P3-491 Parametric

Parameter Name	Attribute value
Objectid	1154982997
package instruction	PGA, PGA81,9X9
Reach Compliance Code	compliant
Country Of Origin	Taiwan, USA
YTEOL	6.1
Address bus width	16
boundary scan	NO
maximum clock frequency	20 MHz
letter of agreement	MIL STD 1553A; MIL STD 1553B; MIL STD 1760; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	S-CPGA-P81
length	25.4 mm
low power mode	NO
Number of serial I/Os	2
Number of terminals	81
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	PGA
Encapsulate equivalent code	PGA81,9X9
Package shape	SQUARE
Package form	GRID ARRAY
power supply	5 V
Certification status	Not Qualified
Maximum slew rate	580 mA
Maximum supply voltage	5.25 V
Minimum supply voltage	4.75 V
Nominal supply voltage	5 V
surface mount	NO
technology	CMOS
Temperature level	MILITARY
Terminal form	PIN/PEG
Terminal pitch	2.54 mm
Terminal location	PERPENDICULAR
width	25.4 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

BU-65178/65179*/61588/61688*/61689*

MINIATURE ADVANCED

COMMUNICATION ENGINE

(MINI-ACE®) AND MINI-ACE PLUS*

Make sure the next

Card you purchase

has...

FEATURES

•

5 Volt Only

•

Fully Integrated MIL-STD-1553 A/B

STANAG 3838 Compliant Terminals

•

One-Square-Inch Package

•

Smallest BC/RT/MT In The Industry

•

Hardware and Software Compatible

with BU-61580 ACE Series

•

Flexible Processor/Memory Interface

•

Bootable RT* Option

•

4K x 16 or 64K x 16* Shared RAM

•

Automatic BC Retries

•

Programmable BC Gap Times

DESCRIPTION

The BU-61588 Mini-ACE and BU-61688 Mini-ACE Plus* integrates two

5-volt-only transceivers, protocol, memory management, processor interface

logic, and 4K x 16, or 64K x 16* words of RAM in a choice of pin grid array

(PGA), quad flat pack or gull lead packages. The Mini-ACE is packaged in a

1.0 square inch, low profile, cofired ceramic multi-chip-module (MCM) pack-

age making it the smallest integrated MIL-STD-1553 BC/RT/MT in the indus-

try.

The Mini-ACE provides full compatibility to DDC’s BU-61580 and BU-65170

Advanced Communication Engine (ACE). As such, the Mini-ACE includes all

the hardware and software architectural features of the ACE.

The Mini-ACE contains internal address latches and bidirectional data buffers

to provide a direct interface to a host processor bus. The memory manage-

ment scheme for RT mode provides three data structures for buffering data.

These structures, combined with the Mini-ACE’s extensive interrupt capabil-

ity, serve to ensure data consistency while off-loading the host processor.

The Mini-ACE Plus* can optionally boot-up as a RT with the Busy bit set for

1760 applications. The Mini-ACE BC mode implements several features

aimed at providing an efficient real-time software interface to the host proces-

sor including automatic retries, programmable intermessage gap times, auto-

matic frame repetition, and flexible interrupt generation.

The advanced architectural features of the Mini-ACE, combined with its small

size and high reliability, make it an ideal choice for demanding military and indus-

trial processor-to-1553 applications.

•

Programmable Illegalization

•

Simultaneous RT/Monitor Mode

•

Operates From 10*/12 /16 / 20* MHz

Clock

FOR MORE INFORMATION CONTACT:

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

Technical Support:

1-800-DDC-5757 ext. 7677 or 7381

7771

All trademarks are the property of their respective owners.

1998, 1999 Data Device Corporation

Recommended Resources

Current-voltage conversion circuit diagram

Broadband Radiation Monitor Circuit Diagram

PFC boost converter circuit diagram using TOP switch

555 traffic signal control machine circuit

Constant voltage/constant current power supply composed of CW117

"Welcome, welcome to patronize" sound and light voice/music circuit

Regarding the CSM password issue.: Using a section of FLASH area for data storage has been realized, and the chip used is 28035. Questions: 1. When the program uses API functions to read FLASH, does it need to be UNLOCKed? (Write opera...; home123456789 Microcontroller MCU

Ask for advice on purchasing SMD transformer: A novice asks for help:I recently need to use a transformer to design a microwave device. As a part of the microwave network, it is used for high frequency (more than 300-400 MHz, preferably G) and we...; yxm RF/Wirelessly

C8051 MCU cannot enter serial port interrupt: I am using the C8051 microcontroller. Now serial port 0 can send and receive normally, but serial port 1 can send data but cannot enter the receive interrupt. The following is the software code. Pleas...; fancyland 51mcu

Several issues that must be paid attention to when using virtual oscilloscopes: Virtual oscilloscopes are becoming increasingly popular due to their unique advantages such as waveform triggering, storage, display, measurement, waveform data analysis and processing. Since there is...; Test/Measurement

DSP_28335_SCI_FIFO transceiver experiment: Using the serial port assistant to send and receive data on the SCIA port, the serial port assistant sends 12 characters, which triggers a receive interrupt. In the interrupt service function, the dat...; fish001 DSP and ARM Processors

Seeking ideas for FPGA driving LCD1602: [size=4]Recently, I have been adjusting this LCD, and it can display characters. I use a one-stage state machine, and the initialization and character display are in one state machine. The problem now...; kobe1941 FPGA/CPLD

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components