ZC0204 Color code marking is applied according to IEC 60062 in four bands (E24 series) for 5 % tolerance, or in five bands (E96 or E192 series). Each
color band appears as a single solid line, voids are permissible if at least
2/3
of the band is visible from each radial angle of view. The last color band for
tolerance is approximately 50 % wider than the other bands.
ZC0207 Color code marking is applied according to IEC 60062 in four (E24 series) or six bands (E96 series). Each color band appears as a single solid line,
voids are permissible if at least
2/3
of the band is visible from each radial angle of view. The last color band represents the TCR for resistors with TCR
50
ppm/K and nominal tolerance
1
%.
Zero ohm jumper are marked with one centered black band.
PERFORMANCE GRAPH’S
Resistance value [Ω]
Resistance value [Ω]
Revision 201601
VITROHM PORTUGUESA, Lda. – Est. Nacional 249-4, Trajouce – 2765-653 S. Domingos de Rana – PORTUGAL
The color of the body coating is light green for jumpers and for a temperature coefficient of ± 50 ppm/K or ± 100 ppm/K, pink for ± 25 ppm/K, or violet for ± 15 ppm/K.
•
Zero ohm jumper are marked with one centered black band.
PACKAGING – Blister tape
Type
A
0
B
0
F
W
D
1
T
2
ZC0204
1,55
±0,1
3,7
±0,1
3,5
±0,05
8,0
-0,1
+0 3
1,0
≤1,8
ZC0207
2,40
±0,1
6,0
±0.1
5,5
±0,05
12,0
±0,3
1,5
≤2,7
Type
ZC0204
ZC0207
W
1
[+1,5]
W
2
[max]
8,4
12,4
14,4
18,4
Packaging
[dimensions]
Ø
180mm/7”
Ø
330mm/13”
Ø
180mm/7”
Ø
330mm/13”
Quantity
[pcs]
3000
10000
1500
7500
ORDERING EXAMPLE
ZC0204
0-0hm = ZC0204
Type
B
C
D
F
J
0
F
F
Tolerance
± 0,1 [%]
±
0,25 [%]
±
0,5 [%]
±
1 [%]
±
5 [%]
Jumper
K
K
Blister tape reel
C
D
E
F
0
E
E
TC
± 15 [ppm]
±
25
[ppm]
±
50
[ppm]
±
100
[ppm]
Jumper
07
07
reel diameter
1K
0R
R-Value
Revision 201601
VITROHM PORTUGUESA, Lda. – Est. Nacional 249-4, Trajouce – 2765-653 S. Domingos de Rana – PORTUGAL
[size=5]I only disassembled the outer shell before, but today I also disassembled the hilt[/size][size=5]I feel that the cost control is really good[/size] [size=5]Can any expert analyze the approxima...
[p=25, null, left][color=#000][size=14px]First, let's talk about how cc1101 is connected to the MCU via SPI. It can be driven by the MCU's own hardware SPI, 3-wire mode, or MCU simulated SPI. [/size][...
It can be seen from the forum that female comrades are very capable at work. I wish all the female friends in the group a happy holiday. I also hope that all the male comrades in the group will come t...
Abstract: This paper briefly describes the principle of the forward circuit commonly used in the design of DC/DC power modules, and proposes an improved circuit with higher efficiency, smaller size, s...
.Net Micro Framework itself supports WPF interface development, but for domestic users, WPF development is relatively unfamiliar, and .Net Micro Framework does not fully support this function. Basic c...
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Administration (USPTO) for a patent for a remote vehicle control system that may be used in future ...[Details]
Reflow soldering, a common soldering method in modern electronics manufacturing, primarily melts solder paste and pads to form solder joints. With technological advancements, soldering equipment ha...[Details]
As the number of cars increases, environmental pressures are also increasing. At this time, some people are saying that new energy vehicles are energy-efficient and environmentally friendly, and ar...[Details]
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
Introduction to the principles of speech recognition technology
Automatic speech recognition (ASR) technology aims to enable computers to understand human speech and extract the textual inform...[Details]
Today's security industry has entered the era of massive networking. Many enterprises, especially financial institutions, have established multi-level video surveillance networking platforms. Lever...[Details]
According to foreign media reports, secondary battery materials company POSCO Future M announced that it has successfully developed two experimental (prototype) positive electrode materials for the...[Details]
Common Mode Semiconductor has officially released its latest generation of power management ICs—the GM6506 series. This fully integrated high-frequency synchronous rectification step-down p...[Details]
The automotive industry in 2025 is undergoing a thorough intelligent reshuffle.
Geely wants to make changes in the field of AI cockpits: in the future, there will be no traditional smart...[Details]
This paper proposes a temperature real-time transmission and display solution based on LED optical data transmission, with Jingwei Yager low-power FPGA HR (Yellow River) series as the main controll...[Details]
In June 2014, the Ministry of Industry and Information Technology issued 4G FD-LTE licenses to China Unicom and China Telecom. Together with the 4G TD-LTE licenses issued to China Mobile, China Uni...[Details]
Overview
As handheld voice communication devices become more and more popular, they are increasingly used in noisy environments, such as airports, busy roads, crowded bars, etc. In such noisy ...[Details]
With the rapid development of electric vehicles in my country, people are beginning to pay attention to the issue of radiation from electric vehicles. We all know that mobile phones emit radiation,...[Details]
In the electronics manufacturing industry, surface mount technology (SMT) placement machines are core equipment for production lines. However, with many different models available on the market, ch...[Details]
1. Fault phenomenon and cause analysis
1. During the operation of the equipment, the expansion sleeve is subjected to a large torque, and the mating surfaces of the shaft and the sleeve move...[Details]