302073Z45R900QB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302073Z45R900QB

302073Z45R900QB: DescriptionFixed Resistor, Metal Foil, 0.75W, 45.9ohm, 350V, 0.02% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

302073Z45R900QB Overview

Fixed Resistor, Metal Foil, 0.75W, 45.9ohm, 350V, 0.02% +/-Tol, -.2,.2ppm/Cel,

302073Z45R900QB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	852897320
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	15.88 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	0.75 W
resistance	45.9 Ω
Resistor type	FIXED RESISTOR
series	HZ(OTHER)
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.02%
Operating Voltage	350 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Internal structure of remote operation inverter control circuit and remote operation panel

Use CD4011 to make light-controlled flashing warning lights

Blind electronic thermometer circuit

LA4440 audio IC circuit

Charging circuit with reverse connection display

Automatic on/off circuit (Rph is photoresistor)

After learning microcontrollers...: It has been more than two years since I started to self-study single-chip microcomputers, but I didn’t spend that much time on it. I can apply some basic things. Now I have a new job, mainly doing swi...; gh131413 MCU

The following error occurs when debugging the 28379D board I made myself: During debugging, the 3.3V and 1.2V power supplies are normal, and the RSTn pin remains at a low level. Please help me find a solution to this problem! Thank you very much!...; xiangou123 Microcontroller MCU

Two situations encountered when debugging Fujitsu Industrial DIY boards: 1. When using MLINK to simulate the DIY board, if the simulation indicator light on the EASY kit board keeps flashing, even if the USB port is unplugged and re-plugged, the indicator light still keeps...; ltbytyn DIY/Open Source Hardware

[Xiao Meige FPGA Advanced Tutorial] Chapter 7 VGA Controller Design and Verification: [align=center][color=#000][size=15px][b][size=6]VII. Design and Verification of VGA Controller [/size][/b][/size][/color][/align] [b]Introduction to VGA Standard [/b][align=left][color=#000][size=15px...; 芯航线跑堂 FPGA/CPLD

Please give me some advice if you have transplanted TCP/IP protocol stack!: I want to port LWIP to UCOS. The information on the Internet is based on the ARM platform, but I want to port it to the PC platform. Is there any hero who can give me some advice? Thank you very much....; min_sd Embedded System

Keil Learning (IV): [b]III. Breakpoint Setting[/b] Figure 3 When debugging a program in the online assembly window, some program lines must meet certain conditions before they can be executed (such as a variable in the p...; yuandayuan6999 MCU

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components