3M
™
Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm Digital Camera Cable, PoCL Compatible, 26 position
1MD26-X5XX-00C-XXX
• Carries power in addition to signal to enable use in base
configuration Power over Camera Link
®
(PoCL)
applications
• Connects between Mini-Camera Link style (SDR) I/O
ports on PoCL Cameras and Camera Link style (MDR)
ports on PoCL framegrabbers
• Both straight and right angle cable exit available
• 3 shielded quads and 6 unshielded twisted pairs
• Entire cable bundle shielded with foil and braid for
additional signal protection
• Rugged ribbon type contact for reliable, repeatable
connectivity
• Thumbscrew retention
• EMI shielded end-to-end for reduced emissions
• See Regulatory Information Appendix (RIA) for chemical
compliance information
Date Modified: November 21, 2008
TS-2286-A
Sheet 1 of 4
Physical
Connector Contact Plating:
Wiping Area: 30 μ" [0.76 μm] Min. Gold (RIA E1 & C1 apply)
Underplating: 100 μ" [ 2.54 μm ] Nickel
Overmolded Shell:
Color: Black
Material: Polyvinyl Chloride (PVC)
Shell:
Color: Gray or Black
Material: Polyester Elastomer
Cable:
Color: Gray or Black
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Electrical
Voltage Rating:
Current Rating:
Insulation Resistance:
Withstanding Voltage:
Twisted Pairs
Cable Characteristic Impedence:
Conductor Size:
Skew (within pair):
Skew (Channel skew per chipset):
30 V
0.5 A
> 1 x 10
8
Ω
at 100 V
DC
125 V
AC (RMS)
for 1 minute
100 ± 10
Ω
differential
28 AWG Stranded
50 ps/meter maximum
100 ps/meter maximum, 50 ps/meter maximum for 1MD26-R5XX-00C-XXX
Environmental
Temperature Rating:
0°C to +70°C
UL File No.: E86982
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
Camera Link is a certification mark of Automated Imaging Association.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm Digital Camera Cable, PoCL Compatible, 26 position
1MD26-X5XX-00C-XXX
24.4
[0.96]
39.7
[1.56]
9.0
[0.35]
32.0
[1.26]
Cable Length
32.5
[1.28]
12.9
[0.51]
Figure 1
Straight SDR - Straight MDR
1MD26-X560-00C-XXX
24.4
[0.96]
16.7
[0.66]
39.7
[1.56]
18.2
[0.72]
30.7
[1.21]
Cable Length
32.5
[1.28]
12.9
[0.51]
9.5
[0.37]
mm
[Inch]
Tolerance Unless Noted
0.0
mm
±.1
0.00
±.01
Figure 2
Right-Angle SDR - Straight MDR
1MD26-X57X-00C-XXX
[ ] Dimensions for Reference Only
TS-2286-A
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm Digital Camera Cable, PoCL Compatible, 26 position
1MD26-X5XX-00C-XXX
24.4
[0.96]
39.7
[1.56]
25.4
[1.00]
9.0
[0.35]
32.0
[1.26]
Cable Length
42.4
[1.67]
19.4
[0.76]
14.0
[0.55]
Figure 3
Straight SDR - Right-Angle MDR
1MD26-X58X-00C-XXX
mm
[Inch]
Tolerance Unless Noted
0.0
mm
±.1
0.00
±.01
[ ] Dimensions for Reference Only
Figure 4
1MD26-X576-00C-XXX
Figure 5
1MD26-X577-00C-XXX
Figure 6
1MD26-X586-00C-XXX
Figure 7
1MD26-X587-00C-XXX
TS-2286-A
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm Digital Camera Cable, PoCL Compatible, 26 position
Table 1
Wiring Chart
CN-1
Connector
Position
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22
10
23
11
24
12
25
1
26
13
14
Shell
Signal
X0-
X0+
X1-
X1+
X2-
X2+
Xclk-
Xclk+
X3-
X3+
SerTC+
SerTC-
SerTFG-
SerTFG+
CC1-
CC1+
CC2+
CC2-
CC3-
CC3+
CC4+
CC4-
+12V
+12V
Inner Shield
Inner Shield
Twisted Pair 1
Twisted Pair 2
Twisted Pair 3
Twisted Pair 4
Twisted Pair 5
Twisted Pair 6
Drain Wire
Drain Wire
Twisted Pair 1
Twisted Pair 2
Twisted Pair 3
Twisted Pair 4
Twisted Pair 5
Twisted Pair 6
Insulated Wire
Insulated Wire
Braid Shield
Quad 3
Quad 3
Quad 2
Quad 2
Quad 1
Quad 1
1MD26-35XX-
00C-XXX Cable
1MD26-R5XX-
00C-XXX Cable
Signal
X0-
X0+
X1-
X1+
X2-
X2+
Xclk-
Xclk+
X3-
X3+
SerTC+
SerTC-
SerTFG-
SerTFG+
CC1-
CC1+
CC2+
CC2-
CC3-
CC3+
CC4+
CC4-
+12V
+12V
Inner Shield
Inner Shield
CN-2
Connector
Position
25
12
24
11
23
10
22
9
21
8
20
7
19
6
18
5
17
4
16
3
15
2
1
26
13
14
Shell
1MD26-X5XX-00C-XXX
Ordering Information
Cable Type:
3: Standard (gray)
R: Flexible (black)
1MD26 - X5XX - 00C - XXX
Cable Exit Combination & Attachment Direction:
60: Straight discrete MDR backshell to a straight overmolded SDR (Figure 1)
76: Straight discrete MDR backshell to a R/A overmolded SDR with cable opposite position 1 (Figures 2 & 4)
77: Straight discrete MDR backshell to a R/A overmolded SDR with cable same side as position 1 (Figures 2 & 5)
86: R/A overmolded MDR with cable opposite position 1 to a straight overmolded SDR (Figures 3 & 6)
87: R/A overmolded MDR with cable same side as position 1 to a straight overmolded SDR (Figures 3 & 7)
Cable Length:
200 = 200 cm
500 = 500 cm
A00 = 1000 cm
Other lengths available by
special order.
Contact 3M for details.
TS-2286-A
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-E