The noise of hydraulic transmission system is generated by the closed circuit composed of motor, hydraulic pump, valve auxiliary device and hydraulic pipeline. Because in this closed circuit system, t...
Use 4 1N4148s to build a rectifier bridge, input a 50Hz sine wave model with an amplitude of 10-20Vp-p. Due to the existence of the forward conduction voltage of the diode and the low amplitude of the...
Use the timer function of the 51 microcontroller to make a clock, AT24C02 stores the time, and after power failure, it can still display the time when the power is turned on again. What applications c...
I use 2812 and XR16L784 to expand 4 serial ports. Now there is no problem to access registers through bus settings. But I just can't send data. I don't know what's going on?My initialization program i...
China Energy Storage Network News:
According to reports, in order to reduce carbon emissions, a group of Japanese technology and energy companies are launching a pilot project that aims to al...[Details]
Recently, the US embargo on ZTE has attracted much attention. Let's take a look at the relevant content with the automotive electronics editor. On April 16, local time, the U.S. Department of Co...[Details]
LAN8720 configuration: IP: 192.168.192.30 Gateway: 192.168.192.1 A high frequency of ARP packets is detected The content of the packet asks for the mac address of 192.168.192.1, and asks the resp...[Details]
From small households to large enterprises, energy consumption has always been a concern for everyone. The energy consumption of Chinese enterprises has always been high, and the country has also wor...[Details]
The independent watchdog of STM32 is driven by a dedicated internal 40Khz low-speed clock, that is, it is still effective even if the main clock fails. Here we need to note that the clock of the inde...[Details]
Manually assemble the following program machine code and analyze the execution function of the program segment. CLR A MOV R2, A MOV R7, #4 LOOP: CLR C MOV A, R0 RLC...[Details]
It is required to use timer/counter 1 for timing, with a timing of 1 second; timer/counter 0 for counter, and the external pulse to be counted is connected from P3.4 (T0). The microcontroller will co...[Details]
As an important branch of the power electronics industry, the technological progress of photovoltaic inverters is highly dependent on the development of electronic components and control technology...[Details]
In one of my products, there are two chips, AVR and PIC, at the same time. When AVR drives the relay, then drives the contactor. PIC is used for display. I found that PIC actually has a little interf...[Details]
Semiconductor giant Intel has launched the desktop version of the 8th generation Coffee Lake architecture
Core
processor more than a month ago, and its performance is said to be 30% to 40% ...[Details]
MSP430 MCU controls stepper motor with display program #include "msp430x22x4.h" #define uchar unsigned char #define uint unsigned int #define comm 0 #define dat 1 #define sclk_1 P4OUT|=0x01 //sc...[Details]
Recently, the 2017 Review and 2018 Outlook Seminar of the Photovoltaic Industry was held in Beijing. Sungrow, a powerful inverter technology company, was invited to attend the seminar. With 20 year...[Details]