• Solid pleated copper foil provides flexibility and
35 db average shielding effectiveness
• CL2 rated, rugged design and high reliability for
peripheral applications
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3Mconnectors.com for compliance information
(RIA E1 & C1 apply)
90101 Series
Date Modified: September 3, 2013
TS-0285-D
Sheet 1 of 2
Physical
Material:
Polyvinyl Chloride (PVC)
Primary Material:
Thermoplastic Elastomer (TPE)
Color:
Gray
Jacket:
Marking:
Conductors:
Shielding:
Standard:
(UL) CL2 75C 30 AWG 3M NU C
30 AWG [ 0.254 ] Tinned Solid Copper
Solid, Pleated, Copper Foil
AWM IIA/B 80C 150V FT1 EU <50V
Electrical
Voltage Rating:
Insulation Resistance:
Characteristic Impedance:
Capacitance:
Inductance:
Propagation Delay:
Velocity of Propagation:
USA: N.E.C. 725, CL2
Unbalanced
53
Ω
28.4 pF/ft [ 93.2 pF/m ]
0.08 μH/ft [ 0.26 μH/m ]
1.52 ns/ft [ 4.99 ns/m ]
67%
Canada: 150V
Balanced
104
Ω
EU: <50V
(Primary Cable) > 1 × 10
10
Ω/10
ft. [ 3 m ]
14.5 pF/ft [ 47.6 pF/m ]
0.16 μH/ft [ 0.52 μH/m ]
1.51 ns/ft [ 4.95 ns/m ]
67%
Note: Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between signal conductors within a pair with the shield floating.
Environmental
Temperature Rating:
Flammability Rating:
USA: CL2: 75°C
USA: N.E.C. 725, CL2
Canada: 80°C
Canada: FT1
UL File No.: E118773, Power Limited Circuit Cable: CL2
3
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pleated Foil Shielded Cable
.025" 30 AWG Solid, TPE Primary, PVC Jacket
Number of
Conductors
20
26
36
40
50
68
80
100
3M Part Number
90101/20
90101/26
90101/36
90101/40
90101/50
90101/68
90101/80
90101/100
Dimension A
0.60 [ 15.2 ]
0.75 [ 19.1 ]
1.00 [ 25.4 ]
1.10 [ 27.9 ]
1.35 [ 34.3 ]
1.80 [ 45.7 ]
2.10 [ 53.3 ]
2.60 [ 66.0 ]
90101 Series
Dimension B
0.475 ± .006 [ 12.07 ]
0.625 ± .006 [ 15.88 ]
0.875 ± .009 [ 22.23 ]
0.975 ± .009 [ 24.77 ]
1.225 ± .009 [ 31.12 ]
1.675 ± .012 [ 42.55 ]
1.975 ± .015 [ 50.17 ]
2.475 ± .017 [ 62.87 ]
A
B
.025
±
.002 Typ
[ 0.64 ]
.10
±
.03
[ 2.5 ]
30 AWG [ 0.254 ]
Tinned Solid Copper
Conductors
Paper
(Mfgr. Option)
TPE Primary
Insulation
.005 [ 0.13 ] Pleated Foil Shield
with Adhesive Backing using Solid
Copper Foil .001 [ 0.03 ] Thick
.026 (0.66) Min
PVC Jacket
Inch
[mm]
Tolerance Unless Noted
.0
Inch
Note: Blue marking on edge of primary cable designates wire #1.
.00
±.05
.000
±.010
±.1
[ ] Dimensions for Reference Only
Ordering Information
90101/XX XX
Number of Conductors
(See Table)
Blank = Standard
SF = Splice Free
Note: Standard lengths are 100 ft, 150 ft, and 300 ft rolls.
Please specify when ordering.
TS-0285-D
Sheet 2 of 2
3
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
Prepare the evaluation kit and connect it to the LaunchPad development kit
The LMG5200 evaluation module (EVM) comes with a circuit that drives the GaN integrated circuit (IC). You need to disconnect ...
TI's OMAP 5 platform not only improves performance across the board, but also adopts new features that can bring new opportunities and user experience, allowing application processors to meet a wider ...
[i=s]This post was last edited by xulikai on 2019-10-20 10:36[/i]This content is originally created by EEWORLD forum user xulikai . If you want to reprint or use it for commercial purposes, you must o...
The unboxing picture is as follows:
Front viewTop viewsidesidesideUnboxingFamily portraitNext I will try it out first to see how to use it, and then I will disassemble it step by step....
DIY mobile phone + Blue Rainy Night hardware design. Basically everyone buys someone else's GSM module and then builds the MCU part by themselves! Now let's talk about the precautions for our own GSM ...
AC-DC is a switching power supply, how much is it paid? Needless to say, DC-DC should not be higher than AC-DC? MCU is divided into 8-bit and 32-bit, of course, the pay varies depending on the level o...
While
the solid-state battery
industry is still engaged in a long technological marathon for
the "ultimate solution" for
electric vehicles
, some companies have begun looking for mor...[Details]
Reflow soldering, a common soldering method in modern electronics manufacturing, primarily melts solder paste and pads to form solder joints. With technological advancements, soldering equipment ha...[Details]
The jammer is a signal blocker, mainly composed of a chip and a radio transmitter. When the car owner presses the remote control lock button, the jammer interferes with the electronic lock receivin...[Details]
Electric motors and internal combustion engines of the same power have similar torque levels. High power requires high torque, and torque determines a vehicle's acceleration speed, commonly known a...[Details]
In the summer of 2025, BlueOval SK, a joint venture between Ford and SK On, officially started production at its first battery factory in Kentucky.
According to the original plan, this w...[Details]
introduction
According to the China Fire Statistics Yearbook, electrical fires accounted for more than 30% of fire accidents in the past decade, and the trend is increasing year by year. They ...[Details]
Overview
As handheld voice communication devices become more and more popular, they are increasingly used in noisy environments, such as airports, busy roads, crowded bars, etc. In such noisy ...[Details]
One of the most core components of electric vehicles is the motor. The power supply provides electrical energy to the motor, which converts this electrical energy into mechanical energy, which in t...[Details]
The practice of warming up a car originated with gasoline-powered vehicles. Warming up the engine allows it to enter a better working state and ensures good lubrication. This has become a habit for...[Details]
With the increasing number of new energy vehicles on the road, the deployment of supporting facilities for these vehicles has accelerated, and new energy vehicles have gradually entered the vision ...[Details]
Industrial computers with GPUs leverage powerful parallel processing to build deep learning models to analyze and respond to optical inputs. The systems develop an understanding of visual data to i...[Details]
Intel®
Xeon®
6
-
core processors now support the new Amazon EC2 R8i and R8i-flex instances on Amazon Web Services (AWS).
These new instances offer superior performance and fast...[Details]
China, August 21, 2025 – STMicroelectronics (NYSE: STM), a world-leading semiconductor company serving a wide range of electronics applications, has published its IFRS 2025 semi-annual financial re...[Details]
With the advancement of science and technology and the promotion of green, energy-saving, and circular development, the demand for precise control and accurate measurement is increasing. In the pow...[Details]
introduction
The rapid adoption of computers has led to a growing number of tasks being performed on them. People from all walks of life, especially programmers and writers, are spending incre...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
