SnPb end metallization option available upon request
(5% Pb minimum)
Applications
Typical applications include military, space quality and high reliability electronics.
Packaging C-Spec Ordering Options Table (100% Matte Sn and SnPb Terminations)
Packaging Type
1
Bulk Bag/Unmarked
7" Reel/Unmarked
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
1
1
Packaging/Grade
Ordering Code (C-Spec)
Not required (Blank)
TU
7411 (EIA 0603 and smaller case sizes)
7210 (EIA 0805 and larger case sizes)
7081
7082
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.
“Bulk Bag” packaging option is not available for Gold (Au) termination finish options and case sizes larger than 2225 (5664 Metric).
2
“Waffle Tray” packaging option is not available for case sizes larger than 2225 (5664 Metric).
3
The terms “Marked” and “Unmarked” pertain to laser marking option of components. All packaging options labeled as “Unmarked” will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices.
3
Reeling quantities are dependent upon chip size and thickness dimension. When ordering using the “T1K0” packaging option, 1812 through 2225 case
size devices with chip thickness of ≥ 1.9 mm (nominal) may be shipped on multiple 7” reels or a single 13” reel. Additional reeling or packaging options
may be available. Contact KEMET for details.
4
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
5
Additional reeling or packaging options may be available. Contact KEMET for details.
1 Chip Introduction[1]TMS320F2812 is a 32-bit fixed-point DSP in the 2000 family recently launched by TI, suitable for motor control system applications. Its own performance characteristics are as fol...
I have 35 STM32F405VGT6 chips. I bought too many chips and I can't use them. I'm selling them at a low price. If you need them, please contact me: QQ522690717...
dat1=ACC; //convert hexadecimal to decimal dat2=dat1/16; dat1=dat1%16; dat1=dat1+dat2*10; return dat1;
In the above program, ACC must be assigned to the variable dat1. Why is it wrong to change it to ...
No high voltage capacitors, no double voltage rectification, the arc is 2CMLike the aurora ~ [[i] This post was last edited by Shi Yu on 2013-11-14 10:58 [/i]]...
Is there any difference between 1. TXBUF0 = nTransData;while((IFG1 & UTXIFG0 ) == 0);and2. while((IFG1 & UTXIFG0 ) == 0);TXBUF0 = nTransData;?There is no difference in the simulation results.I underst...
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
