[i=s] This post was last edited by mengyun2801 on 2014-6-15 22:46 [/i] [size=4] I posted a post before about "Comparison of solutions + the most cost-effective application solution of -5V power supply...
These days, I suddenly remembered that I want to figure out the problem of STM32/STM8 hardware i2c. Because before, including Zhengdian Atom, it seems that many people have said that STM32 hardware i2...
I will share a Labview serial port connection method that is easier for beginners to understand. It can conveniently use the serial port to view the temperature signal output by the DSP and the ADC co...
[color=#000]if(p1|0x01==0) This is a section in the key judgment program. After pressing the key, it is low level. I don’t understand. I never thought that the logical OR with "1" would be =0[/color] ...
In some applications, such as data loggers, it is desirable to have multiplexed analog outputs. When only a single output is active at a time, a voltage-output DAC">digital-to-analog converter (DAC) a...[Details]
Today's mobile phone production testing faces an increasingly complex environment, with challenges of multiple frequency bands and multiple standards, pressure on production test speed, and pressur...[Details]
Lithium-ion batteries have a high energy-to-weight and energy-to-volume ratio, no memory effect, can be recharged many times, have a long service life, and are becoming increasingly cheaper. A good...[Details]
introduction
Cars are becoming an indispensable part of people's lives. However, what worries car users is that the theft of cars is increasing year by year. This paper aims to design a conven...[Details]
According to In-Stat/MDR, the number of mobile phones with Bluetooth capabilities will reach at least 300 million by 2005. One of the clear evidences of the increasing adoption of Bluetooth is that...[Details]
Abstract:
Aiming at the performance requirements of the control system for micro-sized walking robots, a control system that can be used for multi-joint driving of walking robots is introduce...[Details]
Currently, there are huge differences in market analysis statistics for high-brightness LEDs (light-emitting diodes). Despite the divergence of forecasts, one trend is clear: the high-brightness (H...[Details]
"Where am I? Where am I going? Where is he/she? How far is he/she from me?..." Do you often have such questions like me? In fact, who can deny that these are questions that we often think about, ev...[Details]
Biometric authentication technology replaces the traditional methods of using keys, ID cards, passwords, etc. for personal identification, and can be widely used in access management in bank...[Details]
1 Introduction
The LCD driver terminal integrates the LCD controller, microcontroller, etc., and encapsulates the functions of LCD control and graphical interface display through software....[Details]
Many observers and analysts agree that there will be only two hot technology topics in the field of electronic engineering and applications this year: one is wireless communication technology and t...[Details]
0 Introduction
IIR filters are not easy to make into linear phase, but FIR filters can be made into linear phase as long as certain conditions are met. The requirement for linear phase is ...[Details]
Photovoltaic power generation can provide sustainable energy for human beings and protect the environment on which they depend for survival, but its low power generation efficiency and relat...[Details]
The following figure is a schematic diagram of the fiber optic video surveillance network solution of OnAccess@ of Shoumai Communication. It is completely based on video digitization and Ethernet t...[Details]
Electrochemical Principles of Blood Glucose Measurement
The electro-biochemical principle of blood glucose measurement is that when a certain voltage is applied to the blood after the enzy...[Details]