The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts absorb on the top
tapes to cause a failure in the mounting and the parts are destructed by static electricity (more than 1kV : 1J, 2A, 2B, 2E 0.5kV : 1E, Human Body Model 100pF 1.5kΩ) to change the
resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged on the tapes. Similarly, care should be given not to apply the
excessive static electricity when mounting on the boards.
●
Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc. The flux may
contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na
＋
), chrorine (Cl
−
) etc. Therefore these kinds of ionic substances may
induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since lead free solder contains ionic substances.
Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion.
●
Please pay attention that the top of an iron does not direct touch to the components. There is a risk that may cause a change in resistance. Take care that another risk may happen that
the protecting coat is carbonized in an instant when touched directly by the top of the iron, also climatic-proof for electric corrosion or insulation of protecting coat may be dropped down.
Be sure not to give high temperature on the top of the iron as it will degrade the protecting coat.
●
Avoid storing components under direct sun rays, high temperature/humidity. Direct sun rays will cause quality change of taping and difficulty of keeping appropriate peeling strength. 5∼
35℃/35∼75%RH, there is no deterioration of solderability for 12 months, but take special care for storing, because condensation, dust, and toxic gas like hydrogen sulfide, sulfurous acid
gas, hydrogen chloride, etc. may drop solderability.
In order to meet the needs of front-line engineers and LED technology enthusiasts working in the LED field, the Electronic Components Technology Network has specially organized a free sample applicati...
I have asked many questions here and received answers from the moderator and friends. I am very grateful and want to say thank you.Here are some of my confusions about memory:1. The difference between...
RFID Scenarios Let's look at some RFID scenarios using traditional approaches: Integrate a carrier's mobile fleet: You can get in touch with your fleet more quickly. Reduced government interventio...
Last night the west wind withered the green trees. I climbed the high building alone and looked at the end of the world. My clothes became wider and wider, but I never regretted it. I was exhausted fo...
What is the priority of nested interrupts in UCOS? How does the system determine the priority of nested interrupts? Does it set it by itself? Or does it handle interrupts as soon as they come in? Can ...
I modified the program based on Zhou Ligong's code. After removing #include "systemInit.h", the error C:\Keil\ARM\INC\Luminary\timer.h(105): error: #20: identifier "tBoolean" is undefined appeared. Th...
LED Zone
京公网安备 11010802033920号
EEWORLD
