C1210X122JCGACAUTO datasheet, PDF

Datasheet> All Categories > Passive components> capacitor> C1210X122JCGACAUTO

C1210X122JCGACAUTO: DescriptionCeramic Capacitor, Multilayer, Ceramic, 500V, 5% +Tol, 5% -Tol, C0G, -/+30ppm/Cel TC, 0.0012uF, 1310,; CategoryPassive components capacitor; File Size1MB，22 Pages; ManufacturerKEMET; Websitehttp://www.kemet.com; Environmental Compliance

Download Datasheet Parametric View All

C1210X122JCGACAUTO Overview

Ceramic Capacitor, Multilayer, Ceramic, 500V, 5% +Tol, 5% -Tol, C0G, -/+30ppm/Cel TC, 0.0012uF, 1310,

C1210X122JCGACAUTO Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	8059914533
package instruction	CHIP
Reach Compliance Code	compliant
YTEOL	7.73
capacitance	0.0012 µF
Capacitor type	CERAMIC CAPACITOR
dielectric materials	CERAMIC
high	1.7 mm
JESD-609 code	e3
length	3.3 mm
Installation features	SURFACE MOUNT
multi-layer	Yes
negative tolerance	5%
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package form	SMT
method of packing	TR, EMBOSSED PLASTIC, 7 INCH
positive tolerance	5%
Rated (DC) voltage (URdc)	500 V
Guideline	AEC-Q200
size code	1210
surface mount	YES
Temperature characteristic code	C0G
Temperature Coefficient	30ppm/Cel ppm/°C
Terminal surface	Matte Tin (Sn) - with Nickel (Ni) barrier
Terminal shape	WRAPAROUND
width	2.6 mm

Preview

Download Datasheet

View All

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

High Voltage with Flexible Termination System (HV FT-CAP),

C0G Dielectric, 500 – 10,000 VDC (Commercial Grade)

Overview

KEMET’s High Voltage with Flexible Termination (HV FT-

CAP) surface mount MLCCs in C0G dielectric address the

primary failure mode of MLCCs–flex cracks. These devices

utilize a pliable and conductive silver epoxy between the

base metal and nickel barrier layers of the termination

system which inhibits the transfer of board stress to the

rigid ceramic body, therefore mitigating flex cracks which

can result in low IR or short circuit failures.

Flexible termination technology provides superior

flex performance over standard termination systems.

C0G (NP0) dielectric capacitors exhibit no change in

capacitance with respect to time and voltage and boasts a

negligible change in capacitance with reference to ambient

temperature. Capacitance change is limited to ±30ppm/°C

from −55°C to +125°C. These devices exhibit low ESR at

high frequencies and find conventional use as snubbers

or filters in applications such as switching power supplies

and lighting ballasts.

Benefits

• Operating temperature range of −55°C to +125°C

• Superior flex performance (up to 5 mm)

• Capacitance offerings ranging from 1 pF to 120 nF

• DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, 2.5 KV,

3 KV and 10KV

• EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225

• Extremely low ESR and ESL

• High ripple current capability

• No capacitance shift with voltage

• Negligible capacitance shift with respect to temperature

• No piezoelectric noise

• Lead (Pb)-Free, RoHS and REACH compliant

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Applications

• High frequency power converters

• Wide bandgap (WBG), silicon carbide (SiC) and gallium nitride (GaN) systems

• Snubber (high dV/dT)

• Resonant circuits (LLC, Wireless Charging, etc)

• Timing

• Filtering

Built Into Tomorrow

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

C1070_C0G_HV_FT-CAP_SMD • 9/14/2020

Recommended Resources

What is a full range of active devices?

Imitation of integrated structure to produce integrated amplifier

Electronic mosquito swatter circuit

Simultaneous generation of three waveform function oscillators

Computer motherboard circuit diagram 810 3_07

LED-parallel LED digital tube dynamic scanning display circuit (common anode)

I would like to ask if any of you experts have used the Innolux AT070TN84 7-inch LCD? ?: I would like to ask if any of you experts have used the Innolux AT070TN84 7-inch LCD? ? Urgent! ! !...; renmingcan Embedded System

The use of brake fluid in automobile anti-skid control system (Part 2): (1) Open the reservoir cover and inject new brake fluid into the reservoir until the liquid level reaches the maximum liquid level mark (the "(2) If the brake system has just been repaired, or if the ...; frozenviolet Automotive Electronics

Output waveform distortion problem of improved differential circuit: The actual circuit is this, where r1=160k, r2=16M, c1 is 1nf, c2 is 1pf. The blue is the input test sine wave 5v Vpp 12hz, and the yellow output is distorted at this time. When the input is 11hz, ther...; fishiscat Analogue and Mixed Signal

Microbit Name Collection: Last week, I posted a thread to solicit opinions, and everyone gave a lot of good suggestions. However, many opinions are from a general direction, and few are specific, so I hope everyone can give so...; dcexpert MicroPython Open Source section

I would like to ask a question about external memory bus reading and writing: Connect the LCD controller to the 2407DSP in bus connection mode, that is,the LCD 8-bit data line DB7-DB0 is connected to the DSP data line D15-D18 pins,the LCD R/W is connected to the DSP address lin...; che3ccc Analogue and Mixed Signal

Ask about JFlash burning Atmel: Environment: JFlash SWD mode, three-wire SCLK SDIO GND Atmel SAMD10D14AM Problem 1, JFlash can connect to SAMD10, but the burning will probably fail. The error reported is “Can not read register 20 (C...; liudijiang Microchip MCU

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components