The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.6mm Pitch Stacking Height 3mm to 16mm Connector
FX8, FX8C Series
FX8 Series
FX8C Series
Note that FX8 series and FX8C series are not mated with each other.
■Features
1. Stacking Height 3mm to 16mm available
The board to board stacking height can correspond to
3mm~16mm.
●
Stacking Height 3,4mm-FX8 Series
2. SMT Coplanarity
The coplanarity of the SMT solder area lead is maintained at
the high accuracy of less than 0.1mm.
3,4mm
3. Mating Guide
The very small and guide rib is provided, and secures
±0.6mm
self-alignment, considering the mating operativity into accounts.
4. Mis-insertion Prevention
The boss prevents mis-insertion in the board to cause due to
the boss position and boss diameter.
●
Stacking Height 5
to
16mm-FX8C Series
5 to 16mm
■Applications
Note pc, business equipments, which require miniaturization or light-weight
A166
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose
Series●0.6mm
at www.hirose-connectors.com, or contact your Hirose
Connector
FX8, FX8C
website RoHS search
Pitch Stacking Height 3mm to 16mm
sales representative.
FX8 Series
■Product
Specifications
Rating
Current rating 0.4A
Voltage rating 100V AC
Operating Temperature Range
-55ç to +85ç
Note 1.
Operating Humidity Range
-40%
to
80%
Storage Temperature Range
-10ç to +60ç
Note 2.
Storage Humidity Range 40%
to
70%
Condition
250V DC
300V AC/1 minute
100mA
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
1000M
ohms
min
Specification
No flashover or insulation breakdown.
45m
ohms
max.
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
(-55ç:
30 minutes, 15
to
35ç: 2
to
3 minutes
(-85ç:
30 minutes, 15
to
35ç: 2
to
3 minutes) 5 cycles
50 cycles
5.
Humidity (Steady state)
Contact resistance: 55m
ohms
max.: Insulation resistance: 100M
ohms
min.
96 hours at temperature of 40ç and humidity of 90% to 95%
embossed tape packaging product is prepared for all number of contacts, except for 140 contacts.
A167
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have
Series●0.6mm Pitch
discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX8, FX8C
been discontinued, or will be
Stacking Height 3mm to 16mm Connector
BStacking
Height Variation
●Single
Product
FX8-**P-SV
FX8-**S-SV
3mm
FX8-**P-SV1
4mm
3 to 4
BMating
Sectional View
(The above illustration represents the stacking height 3mm type.)
A168
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose
Series●0.6mm
at www.hirose-connectors.com, or contact your Hirose
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube package product by an integer.
Note 2: The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold
by the reel unit when 1 reel = 1000 pieces. Please refer to the delivery form item on page A172 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
A169
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have
Series●0.6mm Pitch
discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
:D Detailed explanation of Network Neighborhood Gao Xing published on 2005-9-3 19:25:00 1. Working principle of Network Neighborhood Network Neighborhood uses NetBIOS protocol. In Win98 second edition...
The 811 development board simulation part is the FT2232D chip, and the 6432 and 8962 development board simulation part is the FT2232D+LC4032V. What is the LC4032V used for? Thank you!...
The printed circuit board processing plant uses automated continuous operation equipment, which is expensive and impossible to do under amateur conditions. What we are introducing here is a method tha...
This post collects ST's official MEMS sensor online seminars to help netizens understand the product features, principles, and application cases of ST MEMS sensors through videos. If there are new sem...
I want to buy a programmer, only for programming 24C16 and AT89S52. I also made an easy 51 pro2.0 for programming 52 (I use top2000 for 24C16, but it feels too slow. I will make mistakes if I choose a...
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
0 Introduction
With the development of society, people pay more and more attention to security work. Monitoring products have been used in various fields instead of being used only in importan...[Details]
Capacitors
are basic components in various electronic devices and are widely used for bypassing, coupling,
filtering
, tuning, etc. in electronic circuits. However, to use capacitors,...[Details]
According to the Industrial Technology Research Institute of Taiwan, due to factors such as the oil crisis and global warming, the issues of energy conservation and environmental protection have at...[Details]
Only a small number of LED manufacturers can produce high-quality LEDs. For applications that are only used for simple indication, low-quality LEDs are sufficient. However, high-quality LEDs must...[Details]
1. Introduction
With the increasing popularity of fully automatic washing machines, consumers have higher and higher requirements for their environmenta...[Details]
Introduction
In industrial control, speed measurement is often required. Generally, a contact tachometer is used. This tachometer must be placed against the center of the shaft to measure. It...[Details]
Fruit planting is an important part of China's agricultural development, and fruit tree pest control operations are becoming more and more important. At present, the overall level of pesticide applica...[Details]
A few days ago, I bought an 8LED flashlight in the market (the flashlight uses No. 5 batteries). Because I had other things to do, I didn't pay attention when purchasing it. When I got home and use...[Details]
Currently, the commonly used solar cell technologies include monocrystalline silicon solar cells and polycrystalline silicon thin-film solar cells. Production process: Monocrystalline silicon solar...[Details]
introduction
Belt drive is a common transmission device used in industrial production. Its commonly used speed detection device is a photoelectric encoder installed at the rotating end of th...[Details]
1. Introduction
AS-Interface bus technology is an intelligent network that uses a single cable to connect sensors and actuators to controllers, transmit data, and provide power. It can be used...[Details]
1 Introduction
With the rapid development of my country's economy, the country has introduced a series of policies such as preferential policies, subsidy policies, and old-for-new policies, wh...[Details]
1 Introduction
In order to cope with the energy crisis and slow down global warming, many countries have begun to pay attention to energy conservation and emission reduction and the de...[Details]
There are two main ways to measure temperature: one is the traditional contact measurement, and the other is
non-contact measurement represented by
infrared temperature measurement
. Tradit...[Details]