Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[size=4]1. The SCH network corresponding to the PCB must correspond to facilitate subsequent updates, which does not take much time. [/size] [size=4] [/size] [size=4]2. The component packaging of the ...
RF Engineer Annual Salary 18-22W Job Responsibilities: 1. Responsible for the feasibility analysis and implementation of RF related design solutions; 2. Responsible for RF circuit schematics, PCB boar...
In early 2002, I started to write a working program for an IC card prepaid electricity meter. The meter used Philips' 8-bit 51-expanded single-chip microcomputer
87LPC764
, and wa...[Details]
In
circuit design,
current
measurement
is widely used, and the main fields are divided into three categories: in measurement,
the electric meter
is used to measure the curre...[Details]
1. Overview
Will passive devices
produce nonlinear intermodulation distortion? The answer is yes! Although there is no systematic theoretical analysis, it has been found in engineerin...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
Instrument stepper motor
The stepper motor is an open-loop control element that converts electrical pulse signals into angular displacement or linear displacement. In the case of non...[Details]
1. With the development of modern industry and the continuous improvement of automation, some medium and large control systems have been greatly facilitated, which not only makes control easier, bu...[Details]
1. Overview
The Virtual CAN Interface (VCI) function library is an application program interface specifically provided for the use of ZLGCAN devices on PCs. The functions in the library ar...[Details]
1. Project Introduction
Shandong Dezhou Xingtai Paper Co., Ltd. is a newly built high-end paperboard production enterprise with domestic leading level established by Shandong Zhaodongfang Pape...[Details]
The potentiometer is an adjustable electronic component. The main functions of the potentiometer in the circuit are as follows:
1. Used as a voltage divider
A potentiometer is a continuou...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
This article will introduce a design method for a distributed control system used in a tracking car, which can perform distributed control of motor modules, sensor modules, and lighting control mod...[Details]
introduction
At present, the research on micron and nanotechnology is very active, which has led to the rapid development of microtechnology and micro-mechanical electronic system (MEMS) t...[Details]
introduction
When it comes to the production of mobile phone lithium-ion batteries, the first thing that comes to mind is Japan's industrialized mechanical assembly line, NOKIO, MOTOLROLA's st...[Details]
Energy conservation and environmental protection are the main directions of current automotive technology research, and power batteries are the key to electric vehicle technology. Research on powe...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
