PRODUCT SPECIFICATION
MINI-FIT JR. AND PLUS HCS CONNECTOR SYSTEM
COMPLIANT PIN INTERFACE (CPI)
(WIRE TO PCB & PCB TO PCB)
1.0 SCOPE
This specification covers the 4.20 mm / (.165 in.) centerline (pitch) Mini-Fit Jr. Compliant Pin
Interface (Mini-Fit CPI™) dual row connector system in wire to board and board to board
applications.
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND PART NUMBER
Product Name
Minifit Jr Female Terminal
Minifit Plus HCS Female Terminals
Receptacle (dual row)
BMI Receptacle Header (dual row)
BMI Receptacle (dual row)
CPI Vertical Header
Part Number
5556-****
45750-****
5557-****
42385-****
42474-****
43879-****
2.2 DIMENSIONS, MATERIALS PLATINGS & MARKINGS
See the appropriate sales drawings for the information on dimensions, materials, platings
and markings.
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
See sales drawings and the other sections of this specification for the necessary referenced
documents and specifications.
3.1 AGENCY APPROVALS
UL File #E29179
CSA Certificate #LR 19980
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-0617
DATE:
2013/08/08
TITLE:
6
PRODUCT SPECIFICATION
MINI-FIT JR. AND PLUS HCS CONNECTOR
SYSTEM COMPLIANT PIN INTERFACE (CPI)
CHECKED BY:
SHEET No.
1
of
6
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-43879-001
NNGUYEN
BELL
SMITH-ROEMER
FILENAME: PS43879.DOC
PRODUCT SPECIFICATION
4.0 RATINGS
4.1 VOLTAGE RATINGS
UL / CSA
600 VOLTS AC (RMS) / DC
4.2 CURRENT RATINGS**
5556 Mini fit Jr Brass or Phosphor Bronze terminals with Tin or Gold Plating
Ckt. Size /
2
4-6
7 - 10
12 - 24
Wire Awg.
16 Awg
8 Amps
7 Amps
6 Amps
5 Amps
Maximum
Rated
Current
Wire to
Board
Header to
Header
18 Awg
20 Awg
22 Awg
24 Awg
26 Awg
28 Awg
Ckt. Size
Current
8 Amps
6 Amps
4 Amps
3 Amps
2 Amps
1 Amps
2
8 Amps
7 Amps
5 Amps
3 Amps
2 Amps
1 Amps
1 Amps
4-6
7 Amps
6 Amps
4 Amps
3 Amps
2 Amps
1 Amps
1 Amps
7 - 10
6 Amps
5 Amps
4 Amps
3 Amps
2 Amps
1 Amps
1 Amps
12 - 24
6 Amps
45750 Mini fit Plus HCS terminals with Tin or Gold Plating
Ckt. Size /
Wire Awg
Maximum
Rated
Current
Wire to
Board
16 Awg
18 Awg
20 Awg
2
4
6, 8
10, 12
14, 16, 18
20, 22, 24
11.5 Amps
10 Amps
9 Amps
9.5 Amps
8.5 Amps
8 Amps
9 Amps
7.5 Amps
7 Amps
8 Amps
7 Amps
6.5 Amps
8 Amps
7 Amps
6 Amps
7.5 Amps
6.5 Amps
5.5 Amps
** Ratings shown represent
MAXIMUM
current carrying capacity of a fully loaded connector
with all circuits powered. Ratings are based on a 30°C maximum temperature rise limit over
ambient (room temperature). Testing conducted with tinned copper conductor stranded wire.
Above charts are intended as a guideline. Current rating is application dependent.
Appropriate de-rating is required depending on factors such as higher ambient temperature,
smaller copper weight of PCB traces, gross heating from adjacent modules or components
and other factors that influence connector performance.
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-0617
DATE:
2013/08/08
TITLE:
SHEET No.
6
PRODUCT SPECIFICATION
MINI-FIT JR. AND PLUS HCS CONNECTOR
SYSTEM COMPLIANT PIN INTERFACE (CPI)
CHECKED BY:
2
of
6
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-43879-001
NNGUYEN
BELL
SMITH-ROEMER
FILENAME: PS43879.DOC
PRODUCT SPECIFICATION
4.3 TEMPERATURES
Operating:*
-40 Degrees C to +105 Degrees C
Nonoperating:
-40 Degrees C to +105 Degrees C
*(Including 30 degrees C terminal temperature at full current)
Note: The Mini-Fit CPI™ connector system was not designed or tested for either
current sharing or hot plugging (mating and unmating of live circuits). Use of this
connector system in these types of applications is not recommended and is not within
the scope of this product specification.
5.0 PERFORMANCE
5.1 ELECTRICAL PERFORMANCE
Section
5.1.1
Item
Initial Contact Resistance (low level)
5.1.2
Insulation Resistance
5.1.3
Dielectric Strength
5.1.4
Compliant Pin Interface Resistance
Test Condition
Mate connectors,
measure by dry circuit,
20mV max., 100mA.
Wire resistance shall
be removed from the
measured value.
Mate connectors, apply
500V AC for 1 minute
adjacent terminal or
ground.
Mate connectors, apply
1500V AC for 1 minute
between adjacent
terminal or ground.
Insert individual
Compliant Pin terminal
into printed circuit
board.
Requirement
10 mΩ max.
1000 MΩ min.
No breakdown.
1.0 mΩ max.
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-0617
DATE:
2013/08/08
TITLE:
6
PRODUCT SPECIFICATION
MINI-FIT JR. AND PLUS HCS CONNECTOR
SYSTEM COMPLIANT PIN INTERFACE (CPI)
CHECKED BY:
SHEET No.
3
of
6
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-43879-001
NNGUYEN
BELL
SMITH-ROEMER
FILENAME: PS43879.DOC
PRODUCT SPECIFICATION
5.2 MECHANICAL PERFORMANCE
Section
5.2.1
Item
Contact Insertion and
Withdrawal for 5556
terminals
Crimp Terminal
Insertion Force
Crimp Terminal
Retention Force
Test Condition
Insert and withdraw a contact at a
speed rate of 25± 6 mm / Minute
Requirement
Max. Insertion = 1.5Kg.
Min. Withdrawal = .01Kg.
5.2.2
5.2.3
5.2.4
Header Terminal
Retention Force
Insert the crimped terminal into the Max. Insertion = 1.5Kg
housing
Apply axial pull out force at a
Min. Retention = 3.0Kg
speed rate of 25± 6 mm/minute on
the terminal inserted in the
housing.
Apply axial pull out force at a
Min. Retention = 1.0Kg
speed rate of 25± 6mm / minute on
the terminal assembled in the
housing.
Mount the crimped terminal, apply
an axial pull out force on the wire
at a speed rate of 25± 6mm /
minute.
16 Awg = 7.0 Kg Min.
18 Awg = 7.0 Kg Min.
20 Awg – 6.0 Kg Min.
22 Awg = 4.0 Kg Min.
24 Awg = 3.0 Kg Min.
26 Awg = 2.0 Kg Min.
28 Awg = 1.0 Kg Min.
150 g min.
5.2.5
Wire Pull Out Force
5.2.6
Normal Force for 5556
terminals
Apply a perpendicular force
simultaneously to each beam to
desired deflection at a speed rate
of 25± 6 mm / minute.
5.2.7
5.2.8
5.2.9
5.2.10
Apply a perpendicular force
simultaneously to each beam to
desired deflection at a speed rate
of 25± 6 mm / minute.
Compliant Pin Insertion Insert Compliant Pin terminal at a
and Retention Force
speed rate of 25± 6 mm / minute
into printed circuit board.
Panel Insertion &
Insert and withdraw a connector at
Withdrawal
a speed rate of 25± 6 mm / minute
Durability for 5556
terminals
Normal Force for
45750 Plus HCS
360 g min.
Insertion = 20 Kg max.
Withdrawal = 2 Kg min.
Insertion = 23 Kg max.
Withdrawal = 12 Kg min.
Insert and withdraw connectors (30 Contact Res. Change
times) at a maximum rate of 10
= 20 mΩ max.
cycles per minute prior to
environmental tests.
TITLE:
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-0617
DATE:
2013/08/08
6
PRODUCT SPECIFICATION
MINI-FIT JR. AND PLUS HCS CONNECTOR
SYSTEM COMPLIANT PIN INTERFACE (CPI)
CHECKED BY:
SHEET No.
4
of
6
DOCUMENT NUMBER:
CREATED / REVISED BY:
APPROVED BY:
PS-43879-001
NNGUYEN
BELL
SMITH-ROEMER
FILENAME: PS43879.DOC
PRODUCT SPECIFICATION
5.2 MECHANICAL PERFORMANCE (cont.)
Section
Item
Test Condition
Per EIA-364-09C, mate
5.2.11
Durability for 45750
connectors 100 cycles for tin
terminals*
plated product, 250 cycles for gold
plated product at a maximum rate
of 500 cycles per hour.
5.2.12
Vibration for 5556
Amplitude: 1.50 mm peak to peak
terminals
Sweep: 10-50-10 Hz in one minute
Duration: 2 hours in each X-Y-Z
axis.
Vibration (Random) for EIA 364-28: Mate connectors and
5.2.13
45750 terminals
vibrate per, test condition
VII,
Letter D. 15 minutes in each axis
5.2.14
Mechanical Shock with 50 G’s with three saw tooth wave
5556 terminals
form shocks in each X-Y-Z axis
Requirement
10 mΩ Max. chg. from
Initial;
Visual: No Damage
Contact Res. Change =
20 MΩ max.
Discontinuity not greater
than 1
µsecond.
10 mΩ Max. chg. from
Initial; Discontinuity < 1
microsecond
Contact Res. Change =
20 mΩ max.
Discontinuity not greater
than 1
µsecond
* Durability ratings established as tested per Durability Test Procedures described by
EIA-364-09C and meet requirements for low level contact resistance and DWV as prescribed
per EIA-364-1000 Test Sequence Group 7.
5.3 ENVIRONMENTAL PERFORMANCE
Section
5.3.1
Item
Cold Resistance with
5556 terminals
Test Condition
-40± -3°C for 96 hrs.
Requirement
Appearance: No damage
Contact Res. Change
=20mΩ max.
Appearance: No damage
Contact Res. Change
=20mΩ max.
Appearance: No damage
Contact Res. Change
=10 mΩ max.
Appearance: No damage
5.3.2
Thermal Shock
5.3.3
Thermal Aging with
5556 terminals
Mate connectors, expose to 10
cycles of: -55 +0-3°C for 30
minutes
+105± 10°C for 5 minutes max.
Mate connectors, expose to 96
hours at 105 ±2°C
5.3.4
Thermal Aging with
45750 terminals
Mate connectors, expose to 240
hours at 105 ±2°C
REVISION:
ECR/ECN INFORMATION:
EC No:
UCP2013-0617
DATE:
2013/08/08
TITLE:
6
Contact Res. Change
=10 mΩ max.
SHEET No.
PRODUCT SPECIFICATION
MINI-FIT JR. AND PLUS HCS CONNECTOR
5
of
6
SYSTEM COMPLIANT PIN INTERFACE (CPI)
CHECKED BY:
APPROVED BY:
DOCUMENT NUMBER:
CREATED / REVISED BY:
PS-43879-001
NNGUYEN
BELL
SMITH-ROEMER
FILENAME: PS43879.DOC
京公网安备 11010802033920号
EEWORLD
