The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.54mm Pitch Bottom Entry Type Connector
MDF7 Series
sFeatures
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the
header pin through type structure and the diverse header variation.
The board to board size can be set at infinite stages.
Board to Board size Freely settable
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards aren't face each other, and can
be oriented in the same direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated
products are lined up. In addition, the header to correspond to the board
to board size are prepared. Concerning board to board size, other
products can be provided, in addition to products in this catalog. Please
contact HRS company as required.
sApplications
Internal connection of telephone sets and OA/FA equipment, connection
between IPM, IGBT and the board.
A71
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
Bottom Entry Type Connector
MDF7 Seriesq2.54mm Pitch
be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sProduct
Specifications
Rating
Current rating: 3A
Operating Temperature Range: -30ç
to
+85ç(Note 1)
Storage Temperature Range: -10ç
to
+60ç (Note 2)
Storage Humidity Range: 40%
to
70%(Note 2)
Voltage rating: 250V AC Operating Humidity Range: 40%
to
80%
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
5. Vibration
6.
Humidity (Steady state)
7. Temperature Cycle
8. Durability
(Mating/un-mating)
1000M
ohms
min.
Specification
500V DC
650V AC/1 minute
100mA
Condition
No flashover or insulation breakdown.
30m
ohms
max.
4. Single Insertion/Extraction Force MIN 0.4N(40gf), MAX 4.4N(450gf)
Measured by the square steel pin with 0.635±0.002mm
No electrical discontinuity of 1µs or more
Contact resistance: 30m
ohms
max.
Insulation resistance: 500M
ohms
min.
Contact resistance: 30m
ohms
max.
Insulation resistance: 1000M
ohms
min.
Contact resistance: 30m
ohms
max.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of
40 ± 2ç and humidity of 90% to 95%
(-55ç: 30 minutes, 5
to
35ç: 10 minutes
(-85ç:
30 minutes, 5
to
35ç: 10 minutes) 5cycles
Tin plating
Gold plating
: 30 cycles
: 50 cycles
9. Resistance to Soldering heat
No deformation of components affecting performance.
Flow: 260ç for 10 seconds
Manual soldering: 350ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
sMaterial
Product
Receptacle
Pin Header
Part
Insulator
Contact
Insulator
Contact
Material
Polyamide
Phosphor bronze
PBT
Brass
Finish
Black
Tin plated or gold plated
Main unit: Black/Locator: Gray
Tin plated or gold plated
Remarks
UL94V-0
–––––––
UL94V-0
–––––––
sOrdering
Information
MDF7
q
q
Series Name
e
Connector Type
S : Single row receptacle
-
*
S - 2.54 DSA
w
e
r
t
: 2.54mm
r
Contact Pitch
t
Contact type
DSA: Straight through hole
DS : Right Angle through hole
: MDF7
w
Number of contacts : 3
to
46
D : Double row receptacle
P : Single row pin header
DP: Double row pin header
A72
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your
Note: The quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
A
38.1
40.64
43.18
45.72
48.26
50.8
53.34
55.88
58.42
60.96
63.5
Unit: mm
B RoHS
35.56
38.1
40.64
43.18
45.72
48.26 YES
50.8
53.34
55.88
58.42
60.96
sDouble
Row Receptacle
Unit: mm
Number of Contacts
Part Number
CL No.
A
B
RoHS
[Specific No.]
–
* *
,
(*
*)
(Note 2)
15.24 12.7
12
MDF7-12D-2.54DSA(**) 547-0032-1-**
(55)
:Tin plated
(56)
:Gold plated
17.78 15.24
14
MDF7-14D-2.54DSA(**) 547-0354-8-**
20.32 17.78
16
MDF7-16D-2.54DSA(**) 547-0363-9-**
25.4 22.86
20
MDF7-20D-2.54DSA(**) 547-0033-4-**
27.94 25.4
22
MDF7-22D-2.54DSA(**) 547-0246-5-**
30.48 27.94
24
MDF7-24D-2.54DSA(**) 547-0244-0-**
YES
33.02 30.48
26
MDF7-26D-2.54DSA(**) 547-0247-8-**
38.1 35.56
30
MDF7-30D-2.54DSA(**) 547-0016-5-**
43.18 40.64
34
MDF7-34D-2.54DSA(**) 547-0227-0-**
50.8 48.26
40
MDF7-40D-2.54DSA(**) 547-0228-3-**
58.42 55.88
46
MDF7-46D-2.54DSA(**) 547-0229-6-**
60.46 58.42
48
MDF7-48D-2.54DSA(**) 547-0060-7-**
Note 1: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 2: The MDF7 series 2-row plating specification is different from the single-row plating specification.
No-specification indicates the gold plating, and (01) indicates the tin plating.
A73
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
Bottom Entry Type Connector
MDF7 Seriesq2.54mm Pitch
be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sSingle
Row Straight Pin Header
[Specific No.]
–
* *
,
(*
*)
(55)
:Tin plated
(01)
:Gold plated
qBoard
Through-hole Diameter:
Ø1.0
+
0.1
+
0
[without locator]
[with locator]
qMDF7(Board
to Board Size: 2.54 to 5.5mm)
Part Number
CL No.
Number of Contacts
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
MDF7- 3P-2.54DSA(**) 547-0220-1-**
MDF7- 5P-2.54DSA(
**
) 547-0113-1-**
MDF7- 6P-2.54DSA(**) 547-0130-0-**
MDF7- 7P-2.54DSA(
**)
547-0148-6-**
MDF7- 8P-2.54DSA(
**)
547-0149-9-**
MDF7- 9P-2.54DSA(**) 547-0150-8-**
MDF7-10P-2.54DSA(**) 547-0039-0-**
MDF7-11P-2.54DSA(
**)
547-0151-0-**
MDF7-12P-2.54DSA(**) 547-0043-8-**
MDF7-13P-2.54DSA(**) 547-0152-3-**
MDF7-14P-2.54DSA(
**
) 547-0153-6-**
MDF7-15P-2.54DSA(**) 547-0018-0-**
MDF7-16P-2.54DSA(**) 547-0111-6-**
NDF7-17P-2.54DSA(
**)
547-0154-9-**
MDF7-18P-2.54DSA(**) 547-0022-8-**
MDF7-19P-2.54DSA(**) 547-0155-1-**
MDF7-20P-2.54DSA(
**
) 547-0123-5-**
MDF7-21P-2.54DSA(**) 547-0156-4-**
MDF7-22P-2.54DSA(**) 547-0157-7-**
MDF7-23P-2.54DSA(
**)
547-0158-0-**
MDF7-24P-2.54DSA(**) 547-0159-2-**
MDF7-25P-2.54DSA(**) 547-0023-0-**
7.62 5.08
15.24 12.7
Unit: mm
C
10
10
RoHS
qMDF7B
(Board to Board Size 2.54 to 12mm)
Part Number
CL No.
Number of Contacts
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
MDF7B- 3P-2.54DSA(**) 547-0304-0-**
MDF7B- 5P-2.54DSA(**) 547-0133-9-**
MDF7B- 6P-2.54DSA(**) 547-0131-3-**
MDF7B- 7P-2.54DSA(**) 547-0177-4-**
MDF7B- 8P-2.54DSA(**) 547-0178-7-**
MDF7B- 9P-2.54DSA(**) 547-0179-0-**
MDF7B-10P-2.54DSA(**) 547-0048-1-**
MDF7B-11P-2.54DSA(**) 547-0047-9-**
MDF7B-12P-2.54DSA(**) 547-0041-2-**
MDF7B-13P-2.54DSA(**) 547-0180-9-**
MDF7B-14P-2.54DSA(**) 547-0181-1-**
MDF7B-15P-2.54DSA(**) 547-0024-3-**
MDF7B-16P-2.54DSA(**) 547-0182-4-**
MDF7B-17P-2.54DSA(**) 547-0183-7-**
MSD7B-18P-2.54DSA(**) 547-0025-6-**
MDF7B-19P-2.54DSA(**) 547-0184-0-**
MDF7B-20P-2.54DSA(**) 547-0052-9-**
MDF7B-21P-2.54DSA(**) 547-0185-2-**
MDF7B-22P-2.54DSA(**) 547-0186-5-**
MDF7B-23P-2.54DSA(**) 547-0066-3-**
MDF7B-24P-2.54DSA(**) 547-0067-6-**
MDF7B-25P-2.54DSA(**) 547-0026-9-**
Unit: mm
C
RoHS
7.62 5.08 16.46
12.7 10.16 16.46
15.24 12.7 16.46
17.78 15.24 16.46
20.32 17.78 16.46
22.86 20.32 16.46
25.4 22.86 16.46
27.94 25.4 16.46
30.48 27.94 16.46
33.02 30.48 16.46
35.56 33.02 16.46
38.1 35.56 16.46
40.64 38.1 16.46
43.18 40.64 16.46
45.72 43.18 16.46
48.26 45.72 16.46
50.8 48.26 16.46
53.34 50.8 16.46
55.88 53.34 16.46
58.42 55.88 16.46
60.96 58.42 16.46
63.5 60.96 16.46
YES
12.7 10.16 10
17.78 15.24 10
20.32 17.78 10
22.86 20.32 10
25.4 22.86 10
27.94 25.4
10
30.48 27.94 10
33.02 30.48 10
35.56 33.02 10
38.1 35.56 10
40.64 38.1
10
43.18 40.64 10
45.72 43.18 10
48.26 45.72 10
50.8 48.26 10
53.34 50.8
10
55.88 53.34 10
58.42 55.88 10
60.96 58.42 10
63.5 60.96 10
YES
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used.
Note 2: The quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
A74
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your
Type Connector
MDF7 Seriesq2.54mm Pitch Bottom Entry
Hirose sales representative.
qMDF7P
(Board to Board Size 2.54 to 8mm)
Unit: mm
Part Number
MDF7P- 3P-2.54DSA(**)
MDF7P- 5P-2.54DSA(**)
MDF7P- 6P-2.54DSA(**)
MDF7P- 7P-2.54DSA(**)
MDF7P- 8P-2.54DSA(**)
MDF7P- 9P-2.54DSA(**)
MDF7P-11P-2.54DSA(**)
MDF7P-13P-2.54DSA(**)
CL No.
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
Number of Contacts
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
C
RoHS
qMDF7C
(Board to Board Size 5.08 to 15mm,with Locator)
Unit: mm
Part Number
MDF7C- 3P-2.54DSA(**)
CL No.
–––––––
Number of Contacts
3
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
C RoHS
7.62 5.08 19.46
12.7 10.16 19.46
17.78 15.24 19.46
20.32 17.78 19.46
22.86 20.32 19.46
25.4 22.86 19.46
27.97 25.4 19.46
30.48 27.94 19.46
33.02 30.48 19.46
35.56 33.02 19.46
38.1 35.56 19.46 YES
40.64 38.1 19.46
43.18 40.64 19.46
45.72 43.18 19.46
48.26 45.72 19.46
50.8 48.26 19.46
53.34 50.8 19.46
55.88 53.34 19.46
58.42 55.88 19.46
60.96 58.42 19.46
63.5 60.96 19.46
7.62 5.08 12.5
12.7 10.16 12.5
15.24 12.7
12.5
17.78 15.24 12.5
20.32 17.78 12.5
22.86 20.32 12.5
25.4 22.86 12.5
27.94 25.4
12.5
30.48 27.94 12.5
33.02 30.48 12.5
35.56 33.02 12.5
38.1 35.56 12.5
40.64 38.1
12.5
43.18 40.46 12.5
45.72 43.18 12.5
48.26 45.72 12.5
50.8 48.26 12.5
53.34 50.8
12.5
55.88 53.34 12.5
58.42 55.88 12.5
60.96 58.42 12.5
63.5 60.96 12.5
YES
MDF7C- 5P-2.54DSA(**) 547-0344-4-**
MDF7C- 7P-2.54DSA(**) 547-0378-6-**
MDF7C- 8P-2.54DSA(**) 547-0375-8-**
MDF7C- 9P-2.54DSA(**)
MDF7C-10P-2.54DSA(**)
MDF7C-12P-2.54DSA(**)
–––––––
–––––––
–––––––
MDF7P-10P-2.54DSA(**) 547-0360-0-**
MDF7P-12P-2.54DSA(**) 547-0345-7-**
MDF7P-14P-2.54DSA(**) 547-0385-1-**
MDF7P-15P-2.54DSA(**) 547-0230-5-**
MDF7P-16P-2.54DSA(**) 547-0346-0-**
MDF7P-17P-2.54DSA(**)
MDF7P-18P-2.54DSA(**)
MDF7P-20P-2.54DSA(**)
MDF7P-21P-2.54DSA(**)
MDF7P-22P-2.54DSA(**)
MDF7P-23P-2.54DSA(**)
MDF7P-24P-2.54DSA(**)
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
MDF7C-11P-2.54DSA(**) 547-0376-0-**
MDF7C-13P-2.54DSA(**) 547-0401-6-**
MDF7C-14P-2.54DSA(**) 547-0380-8-**
MDF7C-15P-2.54DSA(**)
MDF7C-16P-2.54DSA(**)
MDF7C-17P-2.54DSA(**)
–––––––
–––––––
–––––––
MDF7C-18P-2.54DSA(**) 547-0029-7-**
MDF7C-19P-2.54DSA(**) 547-0361-3-**
MDF7C-20P-2.54DSA(**) 547-0198-4-**
MDF7C-21P-2.54DSA(**)
MDF7C-22P-2.54DSA(**)
MDF7C-23P-2.54DSA(**)
MDF7C-24P-2.54DSA(**)
–––––––
–––––––
–––––––
–––––––
MDF7P-19P-2.54DSA(**) 547-0347-2-**
MDF7C-25P-2.54DSA(**) 547-0305-2-**
MDF7P-25P-2.54DSA(**) 547-0348-5-**
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used.
Note 2: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 3: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production
according to your demand. Please contact HRS company, as required.
I want to do fault simulation and get a list of fault states, that is, the state of the circuit output when the components are in different states (i.e. fault states), i.e. fault states. Is there any ...
Some time ago, I discussed the DIY activities of MSP430 with you all. Based on everyone’s discussion, I summarized the first DIY activity.
Ultra-low power clock, how low is the power consumption?
What...
Zener diodes are often represented by "ZD" plus numbers in circuits, such as: ZD5 represents a Zener diode numbered 5.1. The voltage regulation principle of Zener diodes: The characteristic of Zener d...
I want to make an instrument that can test the power consumption of low-power devices. The MCU is only a few dozen uA in sleep mode. After connecting some peripherals, the peak current of the WiFi sig...
Hello, seniors, I used a programmer to blow out the fuse of the MSP430F5131 chip. I read that the MSP430 related information pointed out that the BSL method can be used to modify the program code, but...
Abstract:
With the increasing complexity of smart vehicle electrical and electronic architectures, the full lifecycle management of vehicle electronic control components faces multiple challe...[Details]
Most of the houses we live in now are elevator buildings, mainly because it is more convenient to go up and down the stairs! It can also make life more comfortable. It even helps to increase the ad...[Details]
1. Introduction
Electronic scales are gradually replacing traditional measuring tools like springs and balances in everyday life, such as electronic price computing scales and electronic weigh...[Details]
For healthcare professionals, accurate diagnosis and treatment are crucial for a clear picture of a person's health. However, healthcare professionals often rely on tests at medical facilities, cli...[Details]
Gross profit margin jumped from 13.6% in the first half of last year to 25.9%, almost doubling year-on-year.
On August 21, RoboSense released its interim performance report, in which the...[Details]
On August 22, South Korean media Nate reported on the 20th local time that Samsung Electronics is introducing Hyper Cell technology into its most advanced 2nm process technology, striving to improv...[Details]
On August 22, according to the Ministry of Industry and Information Technology's official website, my country's first mandatory national standard for the control of hazardous substances in electric...[Details]
introduction
Sonar imaging is of great significance in marine resource development and defense. Its long range, intuitive display of the observed area, and target identification make it widely...[Details]
Tires are a very important component for cars. They are related to the driving experience of the vehicle. We are almost inseparable from cars in our daily lives. For tires, according to the role of...[Details]
Electric vehicles' 12V batteries don't rely on a generator to power them. Only gasoline-powered vehicles rely on the engine to drive a generator to generate electricity while driving, which is used...[Details]
1. Multi-channel DAC technology bottleneck
Currently,
the development of multi-channel DAC technology focuses on two core challenges.
First, industrial applications urgently ...[Details]
PowiGaN achieves 95% efficiency at both light and full loads, meeting critical operational and safety requirements.
DARWIN, Australia and SAN JOSE, Calif.,
August 22, 2025 – Powe...[Details]
According to Nikkei, Japan has performed poorly in responding to China's power semiconductor challenges.
There are five major companies in Japan's power chip market: Mitsubishi Electric,...[Details]
My career has been closely tied to the semiconductor industry. From product management to content marketing, I've provided countless forecasts and predictions across a variety of roles. Whethe...[Details]
Lightweighting of automobiles is still a relatively unfamiliar term for automobiles. With the continuous improvement of environmental protection requirements, relevant regulations have also put for...[Details]
_pdf/pg_0001.png)
Test/Measurement
京公网安备 11010802033920号
EEWORLD_pdf/1.png)
_pdf/2.png)
_pdf/3.png)
_pdf/4.png)
_pdf/5.png)
_pdf/pg_0002.png)
_pdf/pg_0003.png)
_pdf/pg_0004.png)
_pdf/pg_0005.png)
