I would like to recommend a good buck-boost chip. The input is 6~24V (wide voltage input), and the output can be stable at 12V. I have seen LTC3789 used on the Internet before, but this chip does not ...
Has anyone encountered the problem that stm32f7 discovery cannot be set after deleting the USB flash drive? It's very frustrating and I don't know what's going on...
This program uses a digital tube to display. Why is it that when the value of the temperature's unit digit is greater than 5, it is displayed as 0, and when the value of the temperature's tenth digit ...
I am developing a program on an ARM board. The operating system is wince5.0. I need a Bluetooth adapter, but I don't know much. 1. Does wince have its own driver? 2. If so, can all Bluetooth adapters ...
I'm currently tuning a board with an xscale 270 CPU, running wince5.0, and a 4GB cf card. Every time I boot up, a dialog box pops up on the desktop saying: unidentified pcccard driver enter the driver...
[align=center][/align] I have never used AVR, nor have I made a USB driver controller, so this project is quite mysterious to me. The original name of this project is AVR-CDC. If I have to explain it ...
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
1 Introduction
A wide variety of communication cables and control cables are widely used in various instruments and control equipment. Whether the cable is well-conducted and
whether
th...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
introduction
In the discharge process of tokamak plasma physics, the study of rupture and sawtooth is of great significance. Rupture and sawtooth exist in most tokamaks. Rupture is a notew...[Details]
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
1 Introduction
As an emerging microfabrication technology, micro-electromechanical system (MEMS) technology has begun to be applied in various fields. It can integrate functions such as inform...[Details]
1. System Structure
This system is a simulation system of indoor air-conditioning temperature/humidity control system. The data acquisition and control center collects temperature/humidity...[Details]
MediaTek (2454) announced the acquisition of F-MStar (3697) and attracted the attention of IC design industry. This morning, Gartner Semiconductor Industry Research Director Hong Cenwei analyzed ...[Details]
Flooded Batteries
This battery developed in Germany can be used to power flashlights, strobe lights and toys as long as it is filled with water. This battery can be stored for 50 years and can...[Details]
12v Lead Acid batteries used in trucks, cars, RVs and uninterruptible power supplies are usually rated at 12V. This circuit monitors the battery, the charge and discharge curves, gives the cu...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
Introduction
Liquid crystal, as a display device, is widely used in low-power products such as instruments, meters, and electronic equipment with its unique advantages. In the past, the displ...[Details]