Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
Pulse Performance Data
Lightning Surge
Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Bluetooth communication porting
1. Introduction
In the previous evaluation, I used the official AT32 IDE of Artly for testing. However, considering that the amount of engineering work on Bluetooth com...
STMicroelectronics today announced its financial results for the first quarter of 2006 (ended April 1, 2006). Net revenues for the first quarter were $2.364 billion , up 13.5% from $2.083 billion in t...
[i=s]This post was last edited by DoreenLiu on 2022-1-24 15:19[/i]Download DE10-Standard CD from the official website : http://www.terasic.com.cn/cgi-bin/blob/1105/PartNo/4 (including DE10-Standard Ch...
As the title says, I have just started to learn MCU, and I have only just started to learn the basics. I admire the masters who can program by themselves, but I have never been sure how to learn, espe...
At present, my motherboard configuration is pxa270+wince5.0, and the memory is 2 pieces of 64M (16-bit) Samsung series Sdram to form 128M Sdram. Now I want to upgrade the memory to 256M, but there is ...
If two threads, one thread continuously asks the other thread to pop up a dialog box for the same resource, will there be a problem of resource grabbing?...