• Glass sealed package assures high reliability and high temperature operation
• Tight tolerance and stability available
• Suitable for RoHS compliant re ow
• Low cost glass sealed crystal solution
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
Moisture Sensitivity Level (MSL) –This product is Hermetically Sealed and not Moisture Sensitive -MSL = N/A: Not Applicable
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
• Microprocessor crystals
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
8.000
8.000
Operation mode
40.001
40.001
Operating Temperature
Storage Temperature
Frequency Tolerance@ +25°C
Frequency Stability over the Operating
Temperatu ( ref. to +25°C)
re
Equivalent series resistance
-10
-40
-50
-50
-----
-----
-----
-----
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging @ 25°C±3°C
Insulation Resistance
-----
-----
-----
-----
500
Typical
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
18
10
-----
-----
Maximum
100.000
40.000
100.000
60.000
+60
+85
+50
+50
ºC
ºC
ppm
ppm
MHz
Units
Notes
Fundamental
Fundamental AT-
cut (Standard)
3
rd
OT AT -cut
(Standard)
Fundamental AT-
cut (See options)
See options
See options
See options
8.000 – 10.000MHz
(Fundamental)
10.001 – 15.999MHz
(Fundamental)
16.000 – 60.000MHz
(Fundamental)
40.000 – 100.000MHz
(3
rd
OT)
100
60
50
70
7
-----
100
±5
-----
pF
pF
µW
ppm
MΩ
Ω
-----
See options
First year
@ 100Vdc
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
ABM 2-
Frequency in MHz
e.g. 8.000MHz
14.31818MHz
26.000MHz
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
MHz -
-
-
-
-
Packaging
Blank: Bulk
T : 1k reel
T2 : 250pcs/reel
Mode
F: Fund AT for >40MHz
Load Capacitance (pF)
Please specify CL in pF
(8 to 33pF) or S for series
Please contact ABRACON for
other values
Custom ESR if other
than standard
R
: Specify a value in Ω
(e.g.: R4 0)
Operating Temp.
(See Table 1 for details)
E : 0°C ~ + 70°C
B : -20°C ~ +70°C
C: -30°C ~ + 70°C
N: -30°C ~ + 85°C
D: -40°C ~ +85°C
Freq. Tolerance
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
(See Table 1 for details)
U: ±10 ppm
G: ±15 ppm
X : ±20 ppm
W: ±25 ppm
Y : ±30 ppm
H: ±35 ppm
A : ±80 ppm
Q: ±100 ppm
V : ±120 ppm
P: ±150 ppm
Note: See Table 1 for the availability of Operating Temp. and Freq. Stability combination
Table 1 Available Combinations of Operating Temp. and Freq. Stability
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
U:±10ppm
√
G:±15ppm
√
√
√
X:±20ppm
√
√
√
W:±25ppm
√
√
√
√
Y:±30ppm
√
√
√
√
√
√*
H:±35ppm
√
√
√
√
√
√*
Operating Temp.
Std: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Stability
Std:±50ppm
√
√
√
√
√
√*
A:±80ppm
√
√
√
√
√
√
Q:±100ppm
√
√
√
√
√
√
V:±120ppm
√
√
√
√
√
√
P:±150ppm
√
√
√
√
√
√
Note: *: Availability depends on frequency.
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
LLC
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
OUTLINE DIMENSION:
0.062±.019
(1.6 ±0.20)
Note: Due to the availability of raw materials, the chamfer may not appear on the both pads. Be advised that this does
not affect the electrical characteristics of the crystal in any way.
Dimensions: inches (mm)
REFLOW PROFILE:
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 02-13-20
ISO9001-2015
CERTIFIED
CERAMIC SMD MICROPROCESSOR CRYSTAL
ABM2
RoHS /RoHS II Compliant
RoHS/RoHS II compliant. Pb in glass (exempt 7(c) per 2015/863/EU Annex)
Typical 8.0 x 4.5 x 1.6 mm
TAPE & REEL:
T: 1000pcs/reel
T2: 250pcs/reel
Dimensions: mm
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
[size=4] As the speed of switching power supplies is getting faster and faster, the power is getting higher and higher, and the density is getting larger and larger, interference problems will inevita...
There is a fingerprint matching algorithm, but I don’t know what the principle is. Have you seen such an algorithm? Fingerprint matching algorithm: - 1. Extract feature points from two images separate...
The same pin, STM32 is set to input mode. The oscilloscope shows a high level, but the microcontroller pin reads a low level. Has anyone encountered the same phenomenon? What is the reason?...
[i=s] This post was last edited by mzb2012 on 2017-10-26 21:06 [/i] [size=5][b] 1. Introduction [/b][/size] [size=5][b][size=5][b][size=5][/size][/b][/size][/b][size=4] The TPA3128D2 chip is a highly ...
Help: I configured CC430 to 250Kbps, MSK modulation. I want to communicate with CC1200. According to the datasheet, I set the rate to 250kbps, the debugging mode to 2-FSK, and the debugging frequency ...
How is the system clock in sopc determined? The external crystal is 50mhz and is directly connected to the cpu without frequency division. Then I want to write a delay program in the ide, but I am not...
Editor's note: In order to help technicians or engineers who have knowledge of PIC microcontroller assembly language quickly master the method of using C language to program PIC microcontrollers, t...[Details]
LED lamps and bulbs are now rapidly replacing incandescent, halogen and CFL (compact fluorescent lamp) light sources in many general lighting applications. Flyback DC/DC converters are the power su...[Details]
introduction
MEMS is a high-tech that has flourished on the basis of integrated circuit production technology and dedicated micro-electromechanical processing methods. Pressure sensors develop...[Details]
Only a small number of LED manufacturers can produce high-quality LEDs. For applications that are only used for simple indication, low-quality LEDs are sufficient. However, high-quality LEDs must...[Details]
1. Introduction
With the increasing popularity of fully automatic washing machines, consumers have higher and higher requirements for their environmenta...[Details]
At present, how various communication technologies will evolve after 3G is a focus of great concern in the industry. Especially for TD-SCDMA, whether it can achieve smooth evolution to the next gen...[Details]
1 Introduction
Ultrasound refers to elastic vibration with a frequency higher than the audible frequency limit (i.e., in the frequency band above 20 kHz). The propagation process of this vib...[Details]
Currently, the commonly used solar cell technologies include monocrystalline silicon solar cells and polycrystalline silicon thin-film solar cells. Production process: Monocrystalline silicon solar...[Details]
In order to prevent the lithium battery from being damaged by abnormal conditions such as overcharge, over discharge, and overcurrent, a lithium battery protection device is usually used to prevent...[Details]
The power supply is the core component of a computer. Although it is not of high value, all computer components rely on the switching power adapter to provide energy, so the stability of a power su...[Details]
Currently, high-frequency and high-efficiency DCDC converters are increasingly used in automotive electronic systems.
High switching frequency can use smaller power inductors and output filter...[Details]
1 Introduction
With the development of computer technology and information technology in the world, the global information age has arrived. All countries are formulating their own development p...[Details]
Since the implementation of the self-weight toll collection system, the highway administration has not only high requirements for the vehicle axle recognition rate, but also requires a long service li...[Details]
1. Overview
With the development of science and technology, PLC is increasingly used in industrial control. The reliability of PLC control systems directly affects the safe production and economic o...[Details]
Infineon's ICL8001G adopts a single-stage flyback and PFC controller with quasi-resonant operation mode, with a power factor greater than 98%, LED driver efficiency up to 90%, an operating voltage up ...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
