CFC-9CV1WO25-35SP0-D

Using Systick timer to achieve delay 1. SysTick timer characteristics The SysTick timer is a 24-bit down counter, that is, when vlue is decremented to 0, an interrupt is triggered and the load va...[Details]

Serial Port:   一. USART_ITConfig(USART1, USART_IT_TXE, ENABLE): As long as the transmit register is empty, there will always be an interrupt. Therefore, if you are not sending data, turn off the tran...[Details]

    1 Introduction     Due to the special working environment of coal mine production, the production process is more dangerous and unsafe than the general industry. With the continuous increase in c...[Details]

On Sunday, the South Australian government unveiled plans to build the world's largest virtual power plant, which will connect at least 50,000 homes over four years and have a capacity ...[Details]

Every era has anxiety that has nowhere to go. Let's follow the embedded editor to learn about the relevant content. The anxiety of the post-Internet era is that if you don’t revolutionize ...[Details]

If you do not use an external crystal on the STM32, the connection method of OSC_IN and OSC_OUT If you use the internal RC oscillator instead of an external crystal, please follow the following metho...[Details]

environment: Host: XP Development environment: MDK4.23 MCU:STM32F103CBT6 illustrate: Collect AD through pins PA1 and PA2. Collect AD 10 times for each channel. #include "ad_driver.h"      //Global ...[Details]

Manually assemble the following program machine code and analyze the execution function of the program segment.       CLR A       MOV R2, A       MOV R7, #4 LOOP:      CLR C       MOV A, R0       RLC...[Details]

It is required to use timer/counter 1 for timing, with a timing of 1 second; timer/counter 0 for counter, and the external pulse to be counted is connected from P3.4 (T0). The microcontroller will co...[Details]

#include  #include   #define uchar unsigned char #define uint unsigned int uchar int_flag; uint qian,bai,shi,ge; uint i; float distance;   // Alphanumeric LCD Module functions #asm    .equ __lcd_port...[Details]

At the early morning of November 17th, Beijing time, at the Global Supercomputing Conference held in Denver, the United States, the "nonlinear earthquake simulation" application completed by the te...[Details]

The clock sources are LFXT1 (low frequency or high frequency), XT2 (high frequency), DCO (digital control).  The clock signals are ACLK (auxiliary clock), SMCLK (subsystem clock), MCLK (system clock)...[Details]

The chip is EM78P153  ; P64, P65 are connected to the crystal oscillator, the oscillation mode is 4MHz crystal oscillator  ; the watchdog is off, the instruction cycle is 2 CLOCK, and P63 is the rese...[Details]

在一个沒有規则性的内容转换中，查表程序是相当有用的，用户可以使用查表程序很快速的得到相关内容的转换。  例：设计一个程序，將如下图所示中的PORT5读到的一个数值，将输入内容做转换，然后输出到PORT6的7段显示器上。       上图中开关关闭，I/O引脚可以得到一个低电位，若是开关开启则I/O引脚可以得到一个高电位。  图 5.2  数码管 八段说明  7段显示器的接线图如上，我們要編一...[Details]

; ******************************************** ; Function: 7-segment digital tube display program * ; MICroProcessor : HT48R50A-1/28SKDIP-A      * ; Author:         www.picavr.com              * ; Cr...[Details]