REVISION AU
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1. HIDDEN LINES ARE USED TO SHOW POLARIZATION
WHEN USING -N OPTION.
2.
C
REPRESENTS A CRITICAL DIMENSION.
3. AS OF REV 'C' ON TCB-50 CABLE
ASSEMBLIES WILL BE LEAD FREE.
4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED
FOR SHORTS AND OPENS.
5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 800V.
6. STRAIN RELIEF TO WITHSTAND 5LB STRAIGHT PULL.
TCSD-XX-X-XX.XX-01-X-XXX-XXX
No OF POSITIONS
03, 04, 05, 07, 08, 10, 12,
13, 15, 17, 20, 22, 25
NOTE: OTHER POSITIONS
AVAILABLE AS ASO. TOOL
IS CAPABLE OF POSITIONS 2-25
END ASSEMBLY
OPTIONS #2
SEE OPTIONS BELOW
OPTIONS #1
SEE OPTIONS BELOW
PLATING OPTION
-F: FLASH SELECTIVE GOLD, MATTE TIN TAIL
-L: LIGHT SELECTIVE GOLD, MATTE TIN TAIL
(LEAVE BLANK FOR STANDARD -S:
SELECTIVE PLATING)
LEAD STYLE
7.WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY NOT EXTEND PAST THE CABLE INSULATION.
8. REFERENCE TCSD-XX-XX-X-X-XXX PRINT FOR CONNECTOR ASSEMBLY AND ITS REQUIREMENTS.
9. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND PAST THE
-S: SINGLE
CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE THICKNESS ON CONSECUTIVE
-D: DOUBLE
AND LESS THAN 50% OF THE CABLE THICKNESS ON NON-CONSECUTIVE STRANDS IS
CONSIDERED A PROCESS INDICATOR.
ASSEMBLY LENGTH
10. FOR LENGTHS LESS THAN 12.5" TOLERANCE SHALL BE +/-.125,
-D"XX", -R, -M & -O OPTION:
ALL OTHER LENGTHS SHALL BE +/-1%.
-D: (DOUBLE END)
XX.XX[XX INCHES x 25.4] ±1%
(SEE NOTE 7 & 10)
C
2.00[50.8] MINIMUM
ALL OTHER OPTION: 1.00[25.4] MINIMUM
(SAME AS -D UNLESS OTHERWISE STATED)
XX.XX[XX INCHES x 25.4] ±1%
(SEE NOTE 7 & 10)
C
-S (SINGLE END)
.125 3.18
REF
.158 4.00
REF
(No OF POS x .07874[2.0000]) + .15748[4.0000] REF
.010 0.25 MAX
C
2
CABLE OVERHANG (TYP)
.200±.010 5.08±0.254
(SEE NOTE 7)
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
-N OPTION
-N OPTION
-RN1 OPTION
-RN2 OPTION
1
.040 1.02
REF
NOTCH DENOTES
FIRST POSITION
02
-RW: REVERSE WIRING
(NOT AVAILABLE WITH -RN1 OR -RN2 OPTIONS)
COLORED WIRE TO OPPOSITE
SIDE OF FIRST POS. INDICATOR
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
01
.040 1.02
REF
.125 3.18
REF
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
-N: NOTCH POLARIZATION
(USE TCSD-XX-XX-N)
(AVAILABLE ON POS 04 THRU 25)
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW
INSULATOR: BLACK PBT
CONTACT: HEAT TREATED BeCu
STRAIN RELIEF: BLACK PBT
WIRE: 28 AWG, 7/36, TINNED, COPPER WITH PVC INSULATOR
PLATING:
-L: .000015 GOLD ON CONTACT AREA, TIN ON REMAINDER
-F: .000003 GOLD ON CONTACT AREA, TIN ON REMAINDER
(STANDARD PLATING IS .000030 GOLD ON CONTACT AREA, TIN ON REMAINDER)
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
TCSD-XX-X-XX.XX-01-X-XXX-XXX
B RAY
11/20/2007
SHEET
1
OF
3
BY:
REVISION AU
-P"XX": POLARIZED MATING
01
03
02
01
03
02
-O: OUTSIDE REVERSED
(NOT AVAILABLE WITH -R OR -M)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
-M: MIDDLE REVERSED
(NOT AVAILABLE WITH -R OR -O)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
02
01
01
01
01
01
02
01
NOTE: THE SAME POSITION WILL BE
POLARIZED ON BOTH ENDS (USE PK-07-N)
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
XX .125[3.18]
(MIN 2 ")
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
XX±.125 [3.18]
(MIN 2")
-RN1 OR -RN2
(REVERSE POLARIZATION NOTCH)
TCSD-05-D-XX-01-RN2 SHOWN
OUTSIDE SOCKET REVERSED WHEN DAISY CHAINED
MIDDLE SOCKET REVERSED
WHEN DAISY CHAINED
-R: REVERSE CONNECTOR
(NOT AVAILABLE WITH -O, -M, -RN1 OR -RN2 OPTION)
(MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS)
-D"XX": DAISY CHAINED
(2" MIN LENGTH, 1" INCREMENTS ONLY)
FIRST CONNECTOR
SECOND CONNECTOR
TCSD-05-D-XX-01-RN1 SHOWN
01
01
02
01
02
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
01
01
COLORED WIRE TO SIDE
OF FIRST POS. INDICATOR
* COLORED WIRE MAY BE
BLACK, BLUE, OR RED.
XX .125[3.18]
(MIN 2")
01
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
NOTE:
-RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY
AVAILABLE FOR POSITIONS 4 OR GREATER
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
-RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY
(REVERSE NOTCH NOT AVAILABLE WITH DAISY CHAIN OPTIONS)
(NOT AVAILABLE WITH -R OR -RW OPTIONS)
.XX .125[3.18][6.70]
(MIN 2")
BOTH SOCKETS REVERSED WHEN DAISY CHAINED
(NOT AVAILABLE WITH -R OR -RW OPTIONS)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
DWG. NO.
SHEET SCALE: 2:1
TCSD-XX-X-XX.XX-01-X-XXX-XXX
B RAY
11/20/2007
SHEET
2
OF
3
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW
BY:
REVISION AU
(TCSD-10-D-XX.XX-01-X-B05 SHOWN)
-B"XX": BREAKOUT OPTION
(NOT AVAILABLE WITH -O, -M, -R, -D"XX" OR -B"XX")
(SAME AS -D, UNLESS OTHERWISE STATED)
(SOLD IN ASSEMBLIES ONLY)
(MUST USE HEAT BEND/STRAIN RELIEF TOOL ON POSITIONS 20-25)
-SR: STRAIN RELIEF
6
XX
(No. OF POS.) x .07874[2.0000] + .31000[7.8740] REF
5.000[127.00] MAX
2.000[50.80] MIN
2
.310±.010 7.87±0.25
(MEASURED AT BOTH ENDS)
.039 1.00
REF
4
5
"XX" = NO. OF CONDUCTORS BROKEN OUT FROM THE FIRST POSITION.
AN EVEN NUMBER POSITION BREAKOUT MUST BE SELECTED FOR A DOUBLE ENDED ASSEMBLY
AND THE BREAKOUT ENDS MUST BE EQUAL TO THE FULL POSITION CONNECTOR.
3
IN-PROCESS 1
(-SR ONLY)
(XX.XX[XX INCHES x 25.4]+.5[19.1]) ±.125[3.175]
3
IN-PROCESS 2
(-SR ONLY)
3
(XX.XX[XX INCHES x 25.4] ±.125[3.175]
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
2MM DOUBLE ROW FEMALE IDC ASSEMBLY
SHEET SCALE: 2:1
TCSD-XX-X-XX.XX-01-X-XXX-XXX
BY:
F:\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW
B RAY
11/20/2007
SHEET
3
OF
3
京公网安备 11010802033920号
EEWORLD
