EEWORLDEEWORLDEEWORLD

Part Number

Search

302075-10P274K00TB

Description
Fixed Resistor, Metal Foil, 2.5W, 274000ohm, 600V, 0.01% +/-Tol, -2,2ppm/Cel,
CategoryPassive components    The resistor   
File Size112KB,6 Pages
ManufacturerVishay
Websitehttp://www.vishay.com
Download Datasheet View All

302075-10P274K00TB Overview

Fixed Resistor, Metal Foil, 2.5W, 274000ohm, 600V, 0.01% +/-Tol, -2,2ppm/Cel,

H Series
Vishay Foil Resistors
New Generation of Secondary Standards Hermetically Sealed High Precision Bulk
Metal
®
Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and
Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)
FEATURES
Temperature coefficient of resistance (TCR):
± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C
ref.).
For
ultra
high
performances
(instrumentation and metrology) please refer to
the last page
Resistance range: 5
Ω
to 1.84 MΩ (higher or
lower values of resistance available)
Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
Power rating: 0.3 W to 2.5 W at + 25 °C (depending on
model - see table 2)
Tolerance: to ± 0.001 % (10 ppm)
Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h
at rated power
Load life stability can be considerably improved
through in-house stabilization
Shelf life stability: ± 2 ppm for at least 6 years
(unaffected by humidity)
Electrostatic discharge (ESD) up to 25 000 V
Rise time: 1 ns effectively no ringing
Thermal stabilization time < 1 s (nominal value achieved
within 10 ppm of steady state value)
Current noise: 0.010 µV
RMS
/V of applied voltage (< - 40 dB)
Thermal EMF: 0.05 µV/°C typical
Voltage coefficient: < 0.1 ppm/V
Non-inductive: < 0.08 µH
Non-inductive, non-capacitive design
Non hot spot design
Terminal finish available: lead (Pb)-free or tin/lead alloy
Impervious to harmful environments - oil-filled
Compliant to RoHS directive 2002/95/EC
Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vishay.com
For better performances (values, TCR, tolerance, stability),
please see the HZ series
INTRODUCTION
The H series resistors are oil-filled, hermetically sealed ultra
precision resistors and are used as secondary standards for
metrology applications.
The hermetic sealing eliminates the ingress of moisture and
oxygen, while the oil acts as a thermal conductor, thus
eliminating the long-term degradation elements of unsealed
resistors, while at the same time allowing the device to
accept short periods of overload without degradation.
Vishay’s Bulk Metal
®
Foil outperforms all other resistor
technologies available today for applications that require
precision and stability. When combined with the hermetic
sealing and oil filling, the H series resistors become
the most
precise and stable resistors available.
With accuracies of 0.001 %, a resistance range from 5
Ω
to 1.84 MΩ, and long term shelf life of less than 2 ppm,
these devices are virtually secondary standards that can be
carried in sets for daily or periodic calibration of factory
measurement equipment.
The H series is available with laboratory and metrology
level precision and long-term stability with additional
in-house oriented processes such as: chip stabilization,
special TCR plotting, additional treatments for ultra
stability and special post manufacturing operations
(PMO). (Please refer to the last page)
TABLE 1 - TCR VS. RESISTANCE VALUE
RESISTANCE
VALUE (Ω)
100 to < 1M84
50 to < 100
5 to < 50
TYPICAL TCR AND MAX. SPREAD
(- 55 °C to + 125 °C, + 25 °C ref.)
(ppm/°C)
± 2 ± 2.5
± 2 ± 3.5
± 2 ± 4.5
FIGURE 1 - SHELF LIFE - VHA518-11
12K9 VS. QHE
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
- 0.1
0
100 200 300 400 500 600 700 800 900 1000
Note
• For maximum TCR < 1 ppm/°C, see VHP100 and contact
application engineering
* Pb containing terminations are not RoHS compliant, exemptions may apply
Resistance Change (ppm)
Time (Days)
Document Number: 63006
Revision: 07-Dec-09
For any questions, contact:
foil@vishay.com
www.vishay.com
1
Basic function display and process introduction
[align=left] [font=宋体]The third article, I was too busy some time ago, basically I don't have much time to tinker with it, I can only update it now during the holiday, and I hope to forgive the inconv...
zhaogong MEMS sensors
Ask an expert
I'm looking for a scanning circuit, similar to the one in a function generator. Thanks in advance!...
rb Analog electronics
Single chip intercom system
The attached is the protel schematic diagram of the intercom system I designed. Please give me some advice. If you have any questions, please correct me! The system is mainly controlled by AT89S52, 4-...
jatychen MCU
How can a program compiled successfully in a PC's emulator run in a WinCE system?
I wrote a program on a PC using eVC, and it runs successfully in Win32{WCE emulator} Debug. How can I make this program run under an ARM9 WinCE system? I am a beginner in eVC, please give me a detaile...
hacky222 Embedded System
Domestic voltage regulator device
Can you recommend a domestic voltage regulator? Which are the more well-known manufacturers? It would be best if there is a product manual....
y2018y Domestic Chip Exchange
WinCE BSP Development
Has anyone developed wince bsp? I want to customize wince kernel on PC104, but the manufacturer does not provide BSP. This is a headache. Has anyone customized BSP? My MSN: yh052720@163.com QQ: 106488...
hacky222 Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 948  2130  1211  1033  2643  20  43  25  21  54 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号