Z201 (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/°C,
PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 %
and Load Life Stability of ± 0.005 %
INDUSTRY BREAKTHROUGH
FEATURES
•
Temperature Coefficient of Resistance (TCR):
± 0.05 ppm/°C typical (0 °C to + 60 °C)
Pb-free
Available
± 0.2 ppm/°C typical (-55 °C to + 125 °C,
+ 25 °C Ref.)
RoHS*
•
Power Coefficient of Resistance “ΔR due to self
COMPLIANT
heating”: ± 5 ppm at Rated Power
•
Rated Power: 0.6 W at 70 °C
0.3 W at 125 °C
•
Resistance Tolerance: to ± 0.005 %
•
Load Life Stability: to ± 0.005 % at 70 °C, 2000 hours at
Rated Power
•
Resistance Range: 10
Ω
to 100 kΩ (higher or lower Values
of Resistance available)
•
Electrostatic Discharge (ESD) above 25 000 Volts
•
Non Inductive, Non Capacitive Design
•
Rise Time: 1.0 ns without ringing
•
Current Noise: 0.01: - 40 dB
•
Thermal EMF: 0.1 µV/°C Max.
0.05 µV/°C typical
•
Voltage Coefficient: < 0.1 ppm/V
•
Non Inductive: 0.08 µH
•
Terminal Finishes available: Lead (Pb)-free
Tin/Lead Alloy
•
Maximum Working Voltage: 300 V
•
Drop in Replacement for S102C/K
•
Matched sets are available per request
•
For better performances please contact us
Any value at any tolerance available within resistance rage
INTRODUCTION
The Z201 (0.150" lead spacing) and Z201L (0.200" lead
spacing) Bulk Metal
®
Z-Foil resistors represent an industry
breakthrough. This is the 3rd in a series of ultra-precision
resistors since the first Bulk Metal
®
Foil resistor was
introduced by Vishay in 1962. Each represents an
improvement on the earlier model. The TCR slope of the
Z201 is 0.2 ppm/°C (- 55 °C to + 125 °C, + 25 °C Ref.) and is
an order of magnitude better than the original S102C. The
Bulk Metal
®
Z-Foil resistor is the ultimate choice in the most
demanding analog applications.
IM
PR
O
VE
D
The Z-Foil technology provides a significant reduction of the
resistive component’s sensitivity to ambient temperature
variations (TCR) and applied power changes (PCR).
Designers can now guarantee a high degree of stability and
accuracy in fixed-resistor applications using solutions based
on Vishay’s revolutionary Z-Foil technology.
Our Application Engineering Department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
Percent of Rated Power at + 125 °C
TABLE 1 - TOLERANCE AND TCR VERSUS
VALUE
STANDARD
TOLERANCE
± 0.005 %
TYPICAL TCR AND
MAXIMUM SPREAD
- 55 °C TO + 125 °C
(+ 25 °C REF.)
± 0.2 ± 0.6 ppm/°C
± 0.2 ± 0.8 ppm/°C
100
Ω
to 100 kΩ
80
Ω
to < 100
Ω
50
Ω
to < 80
Ω
± 0.005 %
± 0.01 %
± 0.01 %
± 0.02 %
± 0.2 ± 1.0 ppm/°C
± 0.2 ± 1.3 ppm/°C
± 0.2 ± 1.6 ppm/°C
25
Ω
to < 50
Ω
10
Ω
to < 25
Ω
* Pb containing terminations are RoHS compliant, exemptions may apply
Document Number: 63113
Revision: 19-Apr-07
For any questions, contact: foil@vishay.com
www.vishay.com
1
PR
O
DU
CT
APPLICATIONS
•
Precision Amplifiers, High Precision Instrumentation,
Medical and Automatic Test Equipment
•
Laboratory, Audio (High End Stereo Equipment)
•
EB Applications, Military, Airborne and Space
•
Down-hole (High Temperature)
FIGURE 1 - POWER DERATING CURVE
200
%
175
%
150
%
125
%
100
%
75
%
50
%
25
%
0
- 75 - 50 - 25
- 55 °C
+ 70 °C
Double Rated Power
Rated Power
Safe operation
for < 150 ppm
ΔR
after
2000 hours
load life
0
+ 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200
Ambient Temperature (°C)
Z201 (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Resistor with TCR of
± 0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance
of ± 0.005 % and Load Life Stability of ± 0.005 %
FIGURE 3 - TYPICAL TCR CURVE Z-FOIL
+ 500
+ 400
+ 300
FIGURE 2 - TRIMMING TO VALUES
(Conceptual Illustration)
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Note:
Foil shown in
black,
etched spaces in
white
FIGURE 4 - STANDARD IMPRINTING AND DIMENSIONS
Front View
L
VISHAY
XXXX
Z201
Date Code
07
16
Year
Week
ST*
Model
Name
W
H
IM
PR
O
VE
D
LS
Lead Material #22 AWG
Round Solder Coated Copper
* The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the unit
after all soldering processes.
LS
W
L
H
0.326 ± 0.010
8.28 ± 0.25
ST
0.010 min
0.254 min
SW
0.035 ± 0.01
1.02 ± 0.13
LL
1.000 ± 0.125
25.4 ± 3.18
Z 201
Inches
mm
0.150 ± 0.005
3.81 ± 0.13
Z 201 L
Inches
mm
0.200 ± 0.005
5.08 ± 0.13
0.105 ± 0.010
2.67 ± 0.25
0.300 ± 0.010
7.62 ± 0.25
TABLE 2 - Z201 SPECIFICATIONS
Stability
± 0.005 % Max
ΔR
at 0.1 W/+ 70 °C
± 0.015 % Max
ΔR
at 0.3 W/+ 125 °C
Load Life at 2000 hours
± 0.01 % Max
ΔR
at 0.05 W/+ 125 °C
± 0.05 % Max
ΔR
at 0.3 W/+ 125 °C
Load Life at 10 000 hours
www.vishay.com
2
For any questions, contact: foil@vishay.com
PR
O
DU
CT
+ 100
ΔR
0
R
(ppm)
- 100
- 200
- 300
0.05 ppm/°C
- 0.1 ppm/°C
0.1 ppm/°C
0.14 ppm/°C
- 400
- 0.16 ppm/°C
- 25
0
0.2 ppm/°C
- 500
- 55
+ 25
+ 60 + 75
+ 100 + 125
Ambient Temperature (°C)
Interloop Capacitance
Reduction in Series
Current Path
Before Trimming
+ 200
Rear View
Optional Customer Part
Number
Print specification, etc. if required
XXXXXX
100R01
0.01%
Resistance
Value
Code
Tolerance
SW
LL
Document Number: 63113
Revision: 19-Apr-07
Z201 (Z-Foil)
Ultra High Precision Z-Foil Resistor with TCR of
Vishay Foil Resistors
± 0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance
of ± 0.005 % and Load Life Stability of ± 0.005 %
TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON
MIL-PRF-55182
CHAR J
Test Group I
Thermal Shock
Short Time Overload
Test Group II
Resistance Temperature
Characteristic
Low Temperature Storage
Low Temperature Operation
Terminal Strength
Test Group III
DWV
Resistance to Solder Heat
Moisture Resistance
Test Group IV
Shock
Vibration
Test Group V
Life Test at 0.3 W/+ 125 °C
2000 hours
10 000 hours
Test Group Va
Life Test at 0.6 W (2 x Rated Power)/+ 70 °C, 2000 hours
Test Group VI
High Temperature Exposure
Test Group VII
Voltage Coefficient
VISHAY Z201
MAXIMUM
ΔR
TYPICAL
ΔR
± 25 ppm/°C
± 0.15 %
± 0.15 %
± 0.2 %
IM
PR
O
VE
D
STANDARD MEASUREMENT
(at room temperature)
Standard Test Conditions:
•
Temperature: + 23 °C ± 2 °C
•
Relative humidity: 35 to 65 % RH
•
Lead test point: 0.5" (12.7 mm) from resistor body
0.005 %/V
IMPROVED PERFORMANCE TESTING
The preceding information is based on product directly off the production line. Improved performance (meaning increased time
stability with load and other stresses) is available through factory conducted "Improved Performance Testing". The test routine
is usually tailored to the user’s stability objectives. A screened product can be brought down to a potential load life drift of less
than 50 ppm.
For example, the data sheet “7 Technical Reasons to Specify BMF Resistive Components” shows the drift characteristics of a
standard product.
Various screen test routines are available and all anticipated stresses must be taken into account before settling on one specific
test routine. Our Applications Engineering Department is available to discuss and recommend appropriate routines given the full
spectrum of anticipated stresses and stability requirements.
Document Number: 63113
Revision: 19-Apr-07
For any questions, contact: foil@vishay.com
PR
O
DU
CT
± 0.2 %
± 0.2 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
± 0.003 % (30 ppm)
see Table 1
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.05 ppm/°C
(0 °C to + 60 °C)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
± 0.15 %
± 0.1 %
± 0.4 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.05 % (500 ppm)
± 0.002 % (20 ppm)
± 0.005 % (50 ppm)
± 0.01 % (100 ppm)
± 0.2 %
± 0.2 %
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.002 % (20 ppm)
± 0.002 % (20 ppm)
± 0.5 %
± 2.0 %
± 0.015 % (150 ppm)
± 0.05 % (500 ppm)
± 0.01 % (100 ppm)
± 0.03 % (300 ppm)
± 0.5 %
± 0.015 % (150 ppm)
± 0.01 % (100 ppm)
± 2.0 %
± 0.1 % (1000 ppm)
± 0.05 % (500 ppm)
< 0.00001 %/V
< 0.00001 %/V
www.vishay.com
3
Z201 (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Resistor with TCR of
± 0.05 ppm/°C, PCR of 5 ppm at Rated Power, Tolerance
of ± 0.005 % and Load Life Stability of ± 0.005 %
TABLE 4 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y1453250R000V9L (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
Ω
K
= kΩ
AER*
0
= Standard
9
= Lead (Pb)-free
1 - 999
= Custom
Y
1
4
5
3
2
5
PRODUCT CODE
1453
= Z201
1454
= Z201L
RESISTANCE TOLERANCE
V
= ± 0.005 %
T
= ± 0.01 %
Q
= ± 0.02 %
A
= ± 0.05 %
B
= ± 0.1 %
C
= ± 0.25 %
D
= ± 0.5 %
F
= ± 1.0 %
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1453 250R000 V 9 L:
TYPE: Z201
VALUE: 250.0
Ω
ABSOLUTE TOLERANCE: ± 0.005 %
TERMINATION: Lead (Pb)-free
PACKAGING: Bulk
HISTORICAL PART NUMBER: Z201T 250R00 V B (will continue to be used)
Z201
MODEL
Z201
Z201L
T
TERMINATION
T
= Lead (Pb)-free
None = Tin/Lead
250R00
OHMIC VALUE
250.0
Ω
IM
PR
O
VE
D
Note
* For non-standard requests, please contact Application Engineering.
www.vishay.com
4
For any questions, contact: foil@vishay.com
PR
O
DU
CT
0
R
0
0
0
V
9
L
PACKAGING
L
= Bulk
V
B
ABS. TOLERANCE
V
T
Q
A
B
C
D
F
= ± 0.005 %
= ± 0.01 %
= ± 0.02 %
= ± 0.05 %
= ± 0.1 %
= ± 0.25 %
= ± 0.5 %
= ± 1.0 %
PACKAGING
B
= Bulk
Document Number: 63113
Revision: 19-Apr-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
51mcu
京公网安备 11010802033920号
EEWORLD
