No.:
Date:
RPCH-K-HTS-0001 /2
2017.4.21
Data sheet
Title:
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR
TYPE AND HIGH POWER
⋅
ANTI SURGE
RPCH16,20,32,35
AEC-Q200 qualified
Style:
RoHS COMPLIANCE ITEM
Halogen and Antimony Free
Note:
・Stock
conditions
Temperature:
+5°C ∼ +35°C
Relative humidity: 25%
∼
75%
The period of guarantee: Within 2 year from shipmen t by the company.
Solderability shall be satisfied.
・Product
specification contained in this data sheet
are subject to change at any time without notice
・If
you have any questions or a Purchasing Specification for any quality
Agreement is necessary, please contact our sales staff.
Hokkaido Research Center
Approval by: T. Sannomiya
Drawing by: M. Shibuya
No: RPCH−K−HTS−0001
Title:
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND
HIGH POWER
⋅
ANTI SURGE RPCH16,20,32,35
Page:
1/10
/2
1. Scope
1.1 This data sheet covers the detail requirements for fixed thick film chip resistors; rectangular type & high power
⋅
anti surge,
style of RPCH16,20,32,35.
1.2 Applicable documents
JIS C 5201−1: 2011, JIS C 5201−8: 2014, JIS C 5201−8−1: 2014
IEC60115−1: 2008, IEC60115−8: 2009, IEC60115−8−1: 2014
EIAJ RC−2134C−2010
2. Classification
Type designation shall be the following form.
(Example)
RPCH
32
123
J
TP
K
1
2
3
4
5
6
Style
1 Fixed thick film chip resistors; rectangular type & & high power
⋅
anti surge
2 Rated dissipation and / or dimension
3 Temperature coefficient of resistance
K
±100×10
−
6
/ °C
Standard
−(Dash)
4 Rated resistance
123
E24 Series, 3 digit, Ex. 123--> 12kΩ,
1000
E96 Series, 4 digit, Ex. 1000-->100Ω
1022--> 10.2kΩ
5 Tolerance on rated resistance
D
±0.5%
F
±1%
J
±5%
6 Packaging form
B
TP
TE
Style
Bulk (loose package)
Paper taping
Embossed taping
Product specification contained in this data sheet are subject to change at any time without notice.
If you have any questions or a Purchasing Specification for any quality agreement is necessary, please contact our sales staff.
Issue: KAMAYA ELECTRIC CO., LTD. Research & Development Department HOKKAIDO Research center Last update: 2017.4.21
No: RPCH−K−HTS−0001
Title:
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND
HIGH POWER
⋅
ANTI SURGE RPCH16,20,32,35
Page:
2/10
/2
3. Rating
3.1 The ratings shall be in accordance with Table−1.
Table−1
Style
Rated
dissipation
(W)
0.33
Temperature coefficient of
resistance (10
-6
/ °C)
K
Standard
K
Standard
K
Standard
K
Standard
K
Standard
K
Standard
K
Standard
K
Standard
±100
±200
±100
±200
±100
±200
±100
±200
±100
±200
±100
±200
±100
±200
±100
±200
Isolation voltage
(V)
150
500
Rated resistance
range (Ω)
10∼1M
1.0∼9.76
10∼1M
1.0∼9.1
10∼1M
1.0∼9.76
10∼1M
1.0∼9.1
10∼1M
1.0∼9.76
10∼1M
1.0∼9.1
10∼1M
1.0∼9.76
10∼1M
1.0∼9.1
Preferred
number series
for resistors
E24, 96
E24
E24, 96
E24
E24, 96
E24
E24, 96
E24
Tolerance on
rated resistance
D(±0.5%),
F(±1%)
J(±5%)
D(±0.5%),
F(±1%)
J(±5%)
D(±0.5%),
F(±1%)
J(±5%)
D(±0.5%),
F(±1%)
J(±5%)
RPCH16
RPCH20
0.5
RPCH32
0.66
RPCH35
0.75
Style
RPCH16
RPCH20
RPCH32
RPCH35
Limiting element voltage
(V)
150
200
Category temperature
range(°C)
−55~+155
3.2 Climatic category
55/155/56
Lower category temperature
Upper category temperature
Duration of the damp heat, steady state test
Limits for change of resistance:
−for
long−term tests
±(5%+0.1Ω)
−for
short−term tests
±(1%+0.05Ω)
−
55 °C
+155 °C
56days
3.3 Stability class
5%
3.4 Derating
The derated values of dissipation at temperature in excess of 70 °C shall be as indicated by the following curve.
100
Percentage of the
rated dissipation
(%)
0
−55
Area of recommended
operation
70
155
Ambient temperature (°C)
Figure–1 Derating curve
Product specification contained in this data sheet are subject to change at any time without notice.
If you have any questions or a Purchasing Specification for any quality agreement is necessary, please contact our sales staff.
Issue: KAMAYA ELECTRIC CO., LTD. Research & Development Department HOKKAIDO Research center Last update: 2017.4.21
No: RPCH−K−HTS−0001
Title:
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND
HIGH POWER
⋅
ANTI SURGE RPCH16,20,32,35
Page:
3/10
/2
3.5 Rated voltage
d.c.or a.c.r.m.s.voltage calculated from the square root of the product of the rated resistance and the rated dissipation.
E: Rated voltage (V)
E =
P · R
P: Rated dissipation (W)
R: Rated resistance (Ω)
Limiting element voltage can only be applied to resistors when the resistance value is equal to or higher than the critical
resistance value.
At high value of resistance, the rated voltage may not be applicable.
4. Packaging form
The standard packaging form shall be in accordance with Table−2.
Table−2
Symbol
B
TP
TE
Packaging form
Bulk (loose package)
Paper taping
Embossed taping
8mm width, 4mm pitches
8mm width, 4mm pitches
Standard packaging
quantity / units
1,000 pcs.
5,000 pcs.
4,000 pcs.
Application
RPCH16,20,32,35
RPCH16,20,32
RPCH35
5. Dimensions
5.1 The resistor shall be of the design and physical dimensions in accordance with Figure−2 and Table−3.
L
c
c
H
d
d
Figure−2
Table−3
Style
RPCH16
RPCH20
RPCH32
RPCH35
5.2 Net weight (Reference)
Style
Net weight(mg)
RPCH16
2
RPCH20
5
RPCH32
9
RPCH35
16
L
1.6±0.1
2.0±0.1
3.1±0.1
3.1±0.15
W
0.8
+0.15
-0.05
W
H
0.45±0.10
0.55±0.10
0.55±0.10
0.55±0.15
c
0.3±0.2
0.3±0.2
0.4±0.25
0.4±0.25
Unit: mm
d
0.3±0.1
0.4±0.2
0.5±0.25
0.5±0.25
1.25±0.10
1.6±0.15
2.5±0.15
Product specification contained in this data sheet are subject to change at any time without notice.
If you have any questions or a Purchasing Specification for any quality agreement is necessary, please contact our sales staff.
Issue: KAMAYA ELECTRIC CO., LTD. Research & Development Department HOKKAIDO Research center Last update: 2017.4.21
No: RPCH−K−HTS−0001
Title:
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND
HIGH POWER
⋅
ANTI SURGE RPCH16,20,32,35
Page:
4/10
/2
6. Marking
Resistor
The Rated resistance shall be marked in 3 digits (E24) or 4 digits (E96) and marked on over coat side.
•
E24 series: 3 digits, E96 series: 4 digits
In case of the resistance value that E96 overlaps with E24, It is marked by either.
The Rated resistance of RPCH16 should not be marked in 4 digits(E96)
Marking example
Contents
Application
3
E24(RPCH16,20,32,35)
123
12×10
［Ω½
→
12
［kΩ½
E24(RPCH 16,20,32,35)
2R2
2. 2
［Ω½
5623
E96(RPCH 20,32,35)
562
×10
3
[Ω]
→
562 [kΩ]
12R7
E96(RPCH 20,32,35)
12.7 [Ω]
7. Performance
7.1 The standard condition for tests shall be in accordance with Sub−clause 4.2, JIS C 5201−1: 2011.
7.2 The performance shall be satisfied in Table−4.
Table−4(1)
No.
Test items
Performance requirements
Condition of test (JIS C 5201−1)
1
Visual examination
As in 4.4.1
Sub−clause 4.4.1
The marking shall be legible, as
Checked by visual examination.
checked by visual examination.
2
Dimension
Sub−clause 4.4.2
As specified in Table−3 of this
specification.
Resistance
As in 4.5.2
Sub−clause 4.5
The
resistance
value
shall
correspond with the rated resistance
taking into account the specified
tolerance.
3
Voltage proof
Sub−clause 4.7
No breakdown or flash over
Method: 4.6.1.4
Test voltage: Alternating voltage with a peak
value of 1.42 times the insulation
voltage.
Duration: 60 s ± 5 s
Insulation resistance
R
≥
1G
Ω
Test voltage: Insulation voltage
Duration: 1 min.
4
Solderability
As in 4.17.4.5
Sub−clause 4.17
The terminations shall be covered
Without ageing
Flux: The resistors shall be immersed in a with a smooth and bright solder
coating.
non−activated soldering flux for 2s.
Bath temperature: 235 °C ± 5 °C
Immersion time: 2 s ± 0.5 s
Product specification contained in this data sheet are subject to change at any time without notice.
If you have any questions or a Purchasing Specification for any quality agreement is necessary, please contact our sales staff.
Issue: KAMAYA ELECTRIC CO., LTD. Research & Development Department HOKKAIDO Research center Last update: 2017.4.21
京公网安备 11010802033920号
EEWORLD
