tolerance. Ideally suited for general purpose use.
Metal film resistors have excellent stability under
load and severe environmental conditions. They
exhibit very low noise current and voltage
coefficients. They are available in a wide range of
resistance values and are suitable for general
purpose and precision applications.
The resistive element comprises a thin film of
nickel-chrome alloy evaporated onto a high
thermal conductivity ceramic element. Metal
end caps are force fitted to the element prior
to spiralling to value. Tinned copper lead wires
are welded to the end caps and the components
are then coated. One coat of phenolic resin is
followed by three coats of epoxy resin. All
resistors are tested for value and tolerance.
STOCKISTS:
This product is not available in Distribution.
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
Page 1 of 3
Website – www.passives.tycoelectronics.com
Email – passivesales@tycoelectronics.com
Product – Specification
TYPE LR25 SERIES
SPECIFICATIONS
Rated Power @ 70 °C
Resistance Range Min
Max
Tolerance
Code letter
Temperature Coefficient
Selection Series
Limiting Element Voltage
Maximum Permitted Element Voltage
Maximum Overload Voltage
Max Intermittent Overload Voltage
Operating Temperature Range
Climatic Category
Dielectric Strength
Insulation Resistance Minimum Dry
1
st
April 2003
ISSUE 2
UNITS
Watts
Ohms
Ohms
%
ppm/°C
Volts
Volts
Volts
Volts
°C
Volts
Mohms
1R0
10M
1
F
± 100
E24
LR25
0.25
10R
1M
1
F
± 100
E96
250
250
500
500
55 to +125
55/125/56
500
1000
DIMENSIONS
STYLE
LR25
L
*
D
d (nom)
0.55 ± 0.02
5.6 ± 0.3
2.3 ± 0.2
* Length is measured in accordance with IEC 294.
DERATING CURVE
SURFACE TEMPERATURE RISE VS. LOAD
MARKING
The resistors are marked with a colour band code in accordance with IEC 62.
MOUNTING
The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines.
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
Page 2 of 3
Website – www.passives.tycoelectronics.com
Email – passivesales@tycoelectronics.com
Product – Specification
TYPE LR25 SERIES
PACKAGING
LR25 resistors are normally supplied taped in 'ammo' boxes of 5000 pieces.
.
1
st
April 2003
ISSUE 2
All tape specifications are in accordance with IEC 286-1.
PERFORMANCE CHARACTERISTICS
The evaluation of the performance characteristics is carried out with reference to IEC Specifications QC 400 000 and QC 400 100
.
TEST REF
4.23
4.24
4.25.1
4.25.3
TEST REF
4.13
4.16
4.18
4.19
4.22
Long Term Tests ±(1% + 0.05 ohm)
Climatic sequence
Damp heat, steady state
Endurance at 70 °C
Endurance at 125 °C
Short Term Tests ±(0.25% + 0.05 ohm)
Overload
Robustness of terminations
Resistance to soldering heat
Rapid change of temperature
Vibration
HOW TO ORDER
Orders for these components should include the following information:-
Type, tolerance code letter and value
e.g. LR25 J 24K
This publication is issued to provide outline information only and (unless specifically agreed to the contrary by the Company in writing) is not to form part of any order or be
regarded as a representation relating to the products or service concerned. We reserve the right to alter without notice the specification, design, price or conditions of
supply of any product or service. Whilst Tyco Electronics Components products are of the very highest quality and reliability, all electronic components can occasionally
be subject to failure. Where failure of a Tyco Electronics Components product could result in life threatening consequences, then the circuit and application must
be discussed with the Company. Such areas might include ECG, respiratory and other medical and nuclear applications and any non fail-safe applications circuit.
Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484
[i=s]This post was last edited by dcexpert on 2017-1-20 10:44[/i] Previously, in Mbed, the ST series could only read the input of the external ADC, but not the internal channels. Today, I accidentally...
May I ask if the function "a" of superVIVI is to burn the program into NANDFlash and then run it from NANDFlash? I found a very strange problem. After I burned the program with a, I did not turn off t...
Author: Chris Meng Based on the function of receiving channel saturation detection in the xWR1642 OOB routine, this article introduces the meaning and use of CQ2 data. The relevant CQ2 data informatio...
The problem of dynamic sealing of equipment always exists with the operation of the equipment. Today, we have specially sorted out the various commonly used sealing forms, usage scope and character...[Details]
Long ago, the lifespan of cars in my country was 15 years. Once a car reached 15 years old, it was forced to be scrapped. However, the policy was later changed. As long as the car does not exceed 6...[Details]
Multi-touch mobile phone
Multi-touch is a system that can respond to multiple touches on the screen at the same time. Multi-touch phones are divided into capacitive and resistive types. Capaci...[Details]
According to foreign media reports, researchers at the University of Surrey have developed an artificial intelligence system that can accurately locate the location of equipment in densely populate...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
Common Mode Semiconductor has officially released its latest generation of power management ICs—the GM6506 series. This fully integrated high-frequency synchronous rectification step-down p...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
As AI accelerates across industries, the demand for data center infrastructure is also growing rapidly.
Keysight Technologies, in collaboration with Heavy Reading, released the "Beyo...[Details]
With the rapid development of electric vehicles in my country, people are beginning to pay attention to the issue of radiation from electric vehicles. We all know that mobile phones emit radiation,...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
With the continuous development of the industrial automation industry, we are seeing an increasing number of intelligent devices using flexible, efficient, and precise robotic arms to p...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
With the increasing popularity of automated equipment, linear modules, a common auxiliary device for automated equipment, have also seen a bright future. In particular, in recent years, many small ...[Details]
HTTP is the abbreviation of Hypertext Transfer Protocol. It is an application protocol based on TCP/IP communication protocol used to transmit HTML and image files. It is an application-level objec...[Details]
Tires are a very important component for cars. They are related to the driving experience of the vehicle. We are almost inseparable from cars in our daily lives. For tires, according to the role of...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
