Philips Semiconductors
Product specification
8-bit microcontroller with DTMF
generator and 128 bytes EEPROM
CONTENTS
1
2
3
4
5
5.1
5.2
6
6.1
6.2
6.3
6.4
6.5
6.6
7
7.1
7.2
7.3
7.4
7.5
7.6
8
8.1
8.2
FEATURES
GENERAL DESCRIPTION
ORDERING INFORMATION
BLOCK DIAGRAM
PINNING INFORMATION
Pinning
Pin descriptions
FREQUENCY GENERATOR
Frequency generator derivative registers
Melody output (P1.7/MDY)
Frequency registers
DTMF frequencies
Modem frequencies
Musical scale frequencies
EEPROM AND TIMER 2 ORGANIZATION
EEPROM registers
EEPROM latches
EEPROM flags
EEPROM macros
EEPROM access
Timer 2
INTERRUPTS
Derivative interrupt
Port 0 Wake-up interrupts
9
10
11
12
13
14
15
16
17
18
19
20
21
21.1
21.2
21.3
22
23
TIMING
RESET
IDLE MODE
STOP MODE
PCD3359A
INSTRUCTION SET RESTRICTIONS
OVERVIEW OF PORT AND
POWER-ON-RESET CONFIGURATION
SUMMARY OF DERIVATIVE REGISTERS
HANDLING
LIMITING VALUES
DC CHARACTERISTICS
AC CHARACTERISTICS
PACKAGE OUTLINES
SOLDERING
Introduction
DIP
LQFP and SO
DEFINITIONS
LIFE SUPPORT APPLICATIONS
1998 May 11
2
Philips Semiconductors
Product specification
8-bit microcontroller with DTMF
generator and 128 bytes EEPROM
1
FEATURES
PCD3359A
•
Clock frequency: 1 to 16 MHz (3.58 MHz for DTMF
suggested)
•
Operating temperature:
−25
to +70
°C
•
Manufactured in silicon gate CMOS process.
2
GENERAL DESCRIPTION
•
8-bit CPU, ROM, RAM, EEPROM and I/O; in a single
28-lead or 32-lead package
•
2-kbyte ROM
•
64-byte RAM
•
128-byte EEPROM
•
OTP version available
•
Over 100 instructions (based on MAB8048) all of
1 or 2 cycles
•
20 quasi-bidirectional I/O port lines
•
8-bit programmable Timer/event counter 1
•
8-bit reloadable Timer 2
•
Three single-level vectored interrupts:
– external
– 8-bit programmable Timer/event counter 1
– derivative; triggered by reloadable Timer 2
•
Wake-up via external or Port 0 interrupt
•
Two test inputs, one of which also serves as the external
interrupt input
•
DTMF, modem, musical tone generator
•
Reference for supply and temperature-independent
tone output
•
Filtering for low output distortion (CEPT compatible)
•
Melody output for ringer application
•
Power-on-reset
•
Stop and Idle modes
•
Supply voltage: 1.8 to 6 V (DTMF tone output and
EEPROM erase/write from 2.5 V)
3
ORDERING INFORMATION
TYPE
NUMBER
(1)
PCD3359AP
PCD3359AT
PCD3359AH
Note
This data sheet details the specific properties of the
PCD3359A. The shared properties of the PCD33xxA
family of microcontrollers are described in the
“PCD33xxA
family”
data sheet, which should be read in conjunction
with this publication.
The PCD3359A is a low voltage microcontroller oriented
towards telephony applications. It includes an on-chip
generator for dual tone multifrequency (DTMF) generator,
modem and musical tones. In addition to dialling,
generated frequencies can be made available as square
waves (P1.7/MDY) for melody generation, providing ringer
operation (in which case the TONE output is disabled).
A wake-up function via Port 0 interrupt facilitates keyboard
interfacing. The PCD3359A can be emulated with the OTP
microcontroller PCD3756A.
The device also incorporates 128 bytes of Electrically
Erasable Programmable Read-Only Memory (EEPROM).
The EEPROM can be used for storing telephone numbers,
particularly for implementing redial functions.
The instruction set is similar to that of the MAB8048 and is
a sub-set of that listed in the
“PCD33xxA family”
data
sheet.
PACKAGE
NAME
DIP28
SO28
LQFP32
DESCRIPTION
plastic dual in-line package; 28 leads (600 mil)
plastic small outline package; 28 leads; body width 7.5 mm
plastic low profile quad flat package; 32 leads; body 7
×
7
×
1.4 mm
VERSION
SOT117-1
SOT136-1
SOT358-1
1. Please refer to the Order Entry Form (OEF) for this device for the full type number to use when ordering. This type
number will also specify the required program and the ROM mask options.
1998 May 11
3
LED Zone
京公网安备 11010802033920号
EEWORLD
