SERIES
FMC
FLANGE MOUNT CIRCULAR
MICROMINIATURE METAL SHELL
FMC
CRISTEK FLANGE MOUNT
METAL CIRCULAR CONNECTOR
NUMBER OF CONTACTS
07
55
85
XX X X X X X X X
WIRE LENGTH
STRANDED (+1.00 / -0.00)
1 = 6 INCHES
2 = 12 INCHES
3 = 18 INCHES
4 = 24 INCHES
5 = 36 INCHES
6 = 72 INCHES
SOLID COPPER (+0.20 / -0.00)
1 = 0.5 INCH
2 = 1.0 INCH
3 = 0.25 INCH
WIRE SIZE
STRANDED WIRE
0= 26 AWG
1 = 24 AWG
2 = 28 AWG
SOLID WIRE
0 =25 AWG
1 = 24 AWG
WIRE COLOR/TYPE
0 = WHITE STRANDED *
1 = YELLOW STRANDED
2 = 10 SOLID COLORS REPEATED *
3 = FULL COLOR CODE STRANDED
9 = SOLID COPPER *
SHELL & CONTACTS TYPE CODE
D = DIAMOND FLANGE REAR PANEL MOUNTING
RECEPTACLE (SOCKET CONTACTS)
S = SQUARE FLANGE REAR PANEL MOUNTING
RECEPTACLE (SOCKET CONTACTS)
P = PLUG (PIN CONTACTS)
SHELL MATERIAL
B = BRASS (REQUIRES PLATING)
S = STAINLESS STEEL (REQUIRES PASSIVATION)
SHELL FINISH
B = ELECTROLESS NICKEL (PREFERRED PLATING)
Y = YELLOW CHROMATE CADMIUM OVER NICKEL PLATE
O = OLIVE DRAB CADMIUM OVER NICKEL PLATE
P = PASSIVATION
TERMINATION
WIRE TYPE
STRANDED
H = HARNESS (MIL-W-16878/4)
M = MILITARY (MIL-W-22759/11) *
S = SPACE (MIL-W-22759/33)
SOLID
G = GOLD PLATED COPPER
T = TIN/LEAD PLATED COPPER
* = MOST COMMONLY USED & STOCKED WIRE TYPES
MATERIALS AND FINISHES ARE IAW MIL-DTL-83513 WHERE APPLICABLE
FOR DETAILS SEE MIL SPEC OR WWW.CRISTEK.COM
1. MATERIALS:
SHELL AND COUPLING NUT - BRASS OR STAINLESS STEEL
INSERT - REINFORCED THERMOPLASTIC OR EPOXY RESIN
DIELECTRIC PLASTICS
PIN/SOCKET CONTACT - COPPER ALLOY
3. SPECIFICATIONS:
CURRENT RATING ------------------ 3 AMPS MAX
TEMPERATURE RATING ---------- -55° C TO +125° C
INSULATION RESISTANCE -------- 5000 MEGOHMS MIN
DWV AT SEA LEVEL ---------------- 600 VAC
DWV AT 70,000 FT ALTITUDE -- 150 VAC
CONTACT RESISTANCE
26 AWG -------------------------- 32 MILLIOHMS
25 AWG -------------------------- 25 MILLIOHMS
24 AWG -------------------------- 25 MILLIOHMS
LOW LEVEL CONTACT ------------- 10 MILLIOHMS MAX
RESISTANCE
CONTACT RETENTION ------------- 5 LBS MINIMUM AXIAL LOAD
ENGAGEMENT FORCE ------------- 6 oz MAX
SEPARATION FORCE --------------- 0.5 oz MIN
4. ADDITIONAL INFORMATION:
DESIGN AND PERFORMANCE IN GENERAL
ACCORDANCE WITH M83513 WHERE
APPLICABLE.
FOR OTHER TERMINATIONS,
CONTACT CRISTEK.
2. FINISH:
SHELL AND COUPLING NUT - ELECTROLESS NICKEL,
YELLOW CADMIUM OVER ELECTROLESS NICKEL,
OLIVE CADMIUM OVER NICKEL OR PASSIVATION
CONTACT - GOLD OVER NICKEL
TOLERANCE: .XXX ±.005
.XX ±.01
ANGLE ±1°
TITLE
FLANGE MOUNT CIRCULAR
MICROMINIATURE
METAL SHELL
DWG. NO.
SHT
REV
1
OF
3
FMC
D
888.265.9162
CRISTEK.COM
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
