0402YJ0R4ZBWTR datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> capacitor> 0402YJ0R4ZBWTR

0402YJ0R4ZBWTR: DescriptionFilm Capacitor, Silicon Dioxide, 16V, 2.5% +Tol, 2.5% -Tol, -/+30ppm/Cel TC, 0.0000004uF, 0402,; CategoryPassive components capacitor; File Size2MB，26 Pages; ManufacturerAVX

Download Datasheet Parametric View All

0402YJ0R4ZBWTR Overview

Film Capacitor, Silicon Dioxide, 16V, 2.5% +Tol, 2.5% -Tol, -/+30ppm/Cel TC, 0.0000004uF, 0402,

0402YJ0R4ZBWTR Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	274637041
package instruction	, 0402
Reach Compliance Code	unknown
ECCN code	EAR99
YTEOL	4.88
capacitance	4e-7 µF
Capacitor type	FILM CAPACITOR
dielectric materials	SILICON DIOXIDE AND OXYNITRIDE
high	0.4 mm
length	1 mm
Installation features	SURFACE MOUNT
negative tolerance	2.5%
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package form	SMT
method of packing	TR, 7/13 INCH
positive tolerance	2.5%
Rated (DC) voltage (URdc)	16 V
Guideline	AEC-Q200
size code	0402
surface mount	YES
Temperature Coefficient	30ppm/Cel ppm/°C
Terminal shape	WRAPAROUND
width	0.55 mm

Preview

Download Datasheet

View All

Accu-P

Thin-Film Technology

THE IDEAL CAPACITOR

The non-ideal characteristics of a real capacitor can be ignored at

low frequencies. Physical size imparts inductance to the capacitor

and dielectric and metal electrodes result in resistive losses, but

these often are of negligible effect on the circuit. At the very high

frequencies of radio communication (>100MHz) and satellite

systems (>1GHz), these effects become important. Recognizing

that a real capacitor will exhibit inductive and resistive impedances

in addition to capacitance, the ideal capacitor for these high

frequencies is an ultra low loss component which can be fully

characterized in all parameters with total repeatability from unit

to unit.

Until recently, most high frequency/microwave capacitors were

based on fired-ceramic (porcelain) technology. Layers of ceramic

dielectric material and metal alloy electrode paste are interleaved

and then sintered in a high temperature oven. This technology

exhibits component variability in dielectric quality (losses, dielectric

constant and insulation resistance), variability in electrode

conductivity and variability in physical size (affecting inductance).

An alternate thin-film technology has been developed which

virtually eliminates these variances. It is this technology which has

been fully incorporated into Accu-P

and Accu-P

to provide high

frequency capacitors exhibiting truly ideal characteristics.

The main features of Accu-P

may be summarized as follows:

• High purity of electrodes for very low and repeatable ESR.

• Highly pure, low-K dielectric for high breakdown field, high

insulation resistance and low losses to frequencies above

40GHz.

• Very tight dimensional control for uniform inductance, unit

to unit.

• Very tight capacitance tolerances for high frequency signal

applications.

This accuracy sets apart these Thin-Film capacitors from

ceramic capacitors so that the term Accu has been employed

as the designation for this series of devices, an abbreviation for

“accurate.”

THIN-FILM TECHNOLOGY

Thin-film technology is commonly used in producing

semiconductor devices. In the last two decades, this technology

has developed tremendously, both in performance and in process

control. Today’s techniques enable line definitions of below 1μm,

and the controlling of thickness of layers at 100Å (10-2μm).

Applying this technology to the manufacture of capacitors has

enabled the development of components where both electrical

and physical properties can be tightly controlled.

The thin-film production facilities at AVX consist of:

• Class 1000 clean rooms, with working areas under laminar-

flow hoods of class 100, (below 100 particles per cubic foot

larger than 0.5μm).

• High vacuum metal deposition systems for high-purity

electrode construction.

• Photolithography equipment for line definition down to

2.0μm accuracy.

• Plasma-enhanced CVD for various dielectric depositions

(CVD=Chemical Vapor Deposition).

• High accuracy, microprocessor-controlled dicing saws for

chip separation.

• High speed, high accuracy sorting to ensure strict tolerance

adherence.

Orientation Marking

Alumina (Al

)

Seal

(SiNO)

Dielectric (SiO

/ SiNO)

Electrode

Alumina (Al

)

Terminations

ACCU-P® CAPACITOR STRUCTURE

The Important Information/Disclaimer is incorporated in these specifications

by reference and should be reviewed in full before placing any order.

012419

Recommended Resources

Photosensitive buzzer circuit

Exhaust fan with air control alarm

555-point frequency TV terminal circuit

Simple duty cycle adjustable pulse generator circuit

2～20MHz variable frequency transistor oscillator

875p computer motherboard circuit diagram_059

PCB for digital tube: The principle of the PCB used for digital tubes seems to be very simple. I want to draw the board well. Which software is better? It would be best if you can briefly explain the process. I am a novice...; Emperor730 PCB Design

I have some questions about differential amplifier circuits in the course of "Transistor Circuit Design". I would like to ask an expert to help me solve my confusion. I would be very grateful!!: Seeing the differential amplifier circuit and the current mirror circuit, I actually understand the differential circuit. That is, the base and collector potentials of Tr1 and Tr2 in the current mirro...; luckyluo Analog electronics

LPC1500+IAR development environment LED light: [i=s]This post was last edited by jerrylwb on 2014-8-20 15:37[/i] To play with a development board well, you must first have a suitable development platform. Currently, the compilers used to debug the...; jerrylwb NXP MCU

Ask for shutdown and system restart code under WINCE: As the title says. Thank you...; 蒙蒙静 Embedded System

[Data] Design of four-bit BCD encoder circuit based on single chip microcomputer: [align=center][size=5]Design of four-bit BCD encoder circuit based on single-chip microcomputer[/size] Source: Modern Electronic Technology Author: Liu Jingbo[/align][table=550][tr][td][size=2][color=...; SuperStar515 MCU

AD603 complete information!!!: [i=s] This post was last edited by paulhyde on 2014-9-15 09:02 [/i] I have the complete information of AD603 here, and I would like to share it with you~~~~...; qiaodaxia Electronics Design Contest

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components