BU-64843F3-263 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-64843F3-263

BU-64843F3-263: DescriptionSerial IO/Communication Controller, CMOS, CQFP80; CategoryThe embedded processor and controller Microcontrollers and processors; File Size1MB，95 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-64843F3-263 Overview

Serial IO/Communication Controller, CMOS, CQFP80

BU-64843F3-263 Parametric

Parameter Name	Attribute value
Objectid	1154987862
package instruction	QFF, QFL80,.89SQ,40
Contacts	80
Reach Compliance Code	compliant
letter of agreement	MIL STD 1553A; MIL STD 1553B; MCAIR; STANAG-3838
External data bus width	16
JESD-30 code	S-XQFP-F80
length	22.606 mm
Number of serial I/Os	2
Number of terminals	80
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Package body material	CERAMIC
encapsulated code	QFF
Encapsulate equivalent code	QFL80,.89SQ,40
Package shape	SQUARE
Package form	FLATPACK
Certification status	Not Qualified
Filter level	MIL-STD-883 Class B (Modified)
Maximum supply voltage	3.6 V
Minimum supply voltage	3 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal form	FLAT
Terminal pitch	1.016 mm
Terminal location	QUAD

Preview

Download Datasheet

View All

Make sure the next

Card you purchase

has...

BU-6474X/6484X/6486X

MINI-ACE

MARK3/MICRO-ACE

*-TE

FEATURES

•

Fully Integrated 3.3 or 5.0 Volt, 1553

A/B Notice 2 Terminal

•

World’s First all 3.3 Volt Terminal

•

Transceiver Power-Down Options

•

World’s Smallest CQFP MIL-STD-1553

Device

•

80-pin Ceramic Flat/Gull Wing

Package or 324-Ball BGA Package

•

Enhanced Mini-ACE Architecture

•

Multiple Configurations:

- RT-only, 4K RAM

- BC/RT/Monitor, 4K RAM

DESCRIPTION

The Mini-ACE Mark3 and Micro-ACE-TE are the world's first MIL-STD-1553

terminals which can be powered entirely by +3.3 volts, thus eliminating the

need for a +5 volt power supply. With a package body of 0.880 inches square

and a gull wing "toe-to-toe" dimension of 1.110 inches, the Mini-ACE Mark3

is the industry's smallest ceramic gull-lead 1553 terminal. At 0.815 inches

square, the Micro-ACE-TE (BGA package) provides the smallest industry

footprint, enabling its use in applications where PC board space is at a pre-

mium.

These devices integrate dual 3.3 or 5 volt transceivers, 3.3 or 5.0 volt protocol

logic, and either 4K or 64K words of internal RAM. The architecture is identi-

cal to that of the Enhanced Mini-ACE, and most features are functionally and

software compatible with the previous Mini-ACE (Plus) and ACE genera-

tions.

A salient feature of the Mini-ACE Mark3 and Micro-ACE-TE is the advanced

bus controller architecture. This provides methods to control message sched-

uling, the means to minimize host overhead for asynchronous message

insertion, facilitate bulk data transfers and double buffering, and support

various message retry and bus switching strategies.

The remote terminal architecture provides flexibility in meeting all common

MIL-STD-1553 protocols. The choice of RT data buffering and interrupt

options provides robust support for synchronous and asynchronous messag-

ing, while ensuring data sample consistency and supporting bulk data trans-

fers. The monitor mode provides true message monitoring, and supports fil-

tering on an RT address/T-R bit/subaddress basis.

The Mini-ACE Mark3 and Micro-ACE-TE incorporate fully autonomous built-

in self-tests of internal protocol logic and RAM. The terminals provide

the

same flexibility in host interface configurations as the ACE/Mini-ACE, along

with a reduction in the host processor's worst case holdoff time.

- BC/RT/Monitor, 64K RAM

•

Supports 1553A/B Notice 2, McAir,

STANAG 3838 Protocols

•

MIL-STD-1553, McAir, and MIL-

STD-1760 Transceiver Options

•

Highly Flexible Host Side Interface

•

Compatible With Mini-ACE and ACE

Generations

•

Highly Autonomous BC with Built-In

Message Sequence Controller

•

Choice of Single, Double, and

Circular RT Buffering Options

•

Selective Message Monitor

•

Comprehensive Built-In Self-Test

•

Choice Of 10, 12, 16, or 20 MHz Clock

Inputs

•

Software Libraries and Drivers

available for Windows® 9x/2000/XP,

Windows NT®, VxWorks® and Linux

•

Available with Full Military

Temperature Range and Screening

FOR MORE INFORMATION CONTACT:

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

subject to one or more patents pending.

All trademarks are the property of their respective owners.

The technology used in DDC’s Micro-ACE series of products may be

Recommended Resources

Basic Audio Op Amp

A "desktop theater" based on personal computers

Sharp brand SJ-154G, 154A refrigerator circuit

Single junction semiconductor tube trigger circuit-a

Complete induction cooker circuit diagram 3

ERROR:Pack:1107 - Unable to combine the following symbols into a single IOB: Hello everyone, I was recently writing a VHDL code for data storage . When I assigned a position to a clock pin, the following error occurred. I couldn't figure it out after a long time. I hope that e...; eeleader FPGA/CPLD

Please tell me how to write an assembly instruction in C language, urgent!!!: [i=s] This post was last edited by dontium on 2015-1-23 13:22 [/i] Can WRITA *(BL) *(u16*)(0xd555)=0xaa be used instead? If so, how does the compiler know that it is written to the IO space? Please gi...; polluxzy Analogue and Mixed Signal

What type of 32.768kHz crystal should be used to make the MSP430 work stably?: The 32.768KHz crystal used for the MSP430 should have the following important specifications: 1. Load capacitance (specified in the data sheet) Note: Effective load capacitance The crystal manufacture...; wstt Microcontroller MCU

Looking for a password lock program based on AT89c51 microcontroller: I'm a beginner, and the teacher gave me an assignment to write a password lock program based on AT89C51....; dmxsew MCU

[HELP] VxWorks library configuration issues: When I debugged the evaluation version of Wind River Workbench3 and followed the above steps to RTP, DEBUG always reported two shared objects "libProdConsSL.so" not found. I just learned VxWorks and d...; linfeng413 Real-time operating system RTOS

Analysis of MQTT protocol in the source code of IoT firewall himqtt: Analysis of MQTT protocol in the source code of IoT firewall himqtthimqtt is the first high-performance MQTT IoT firewall with complete source code - MQTT Application FireWall , written in C language,...; hihttps Industrial Control Electronics

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components